Datalogic MAGELLAN 3510HSi User manual

QUICK REFERENCE GUIDE

MAGELLAN™ 3510HSi

Omni-Directional Imaging Scanner

Datalogic S.r.l.

Via S. Vitalino, 13

40012 Calderara di Reno — Italy

Tel. +39 051 3147011

Fax +39 051 3147205

tation may be reproduced, stored in or introduced into a retrieval system, or transmitted

in any form or by any means, or for any purpose, without the express written permission

of Datalogic S.p.A. and/or its affiliates.

Owners of Datalogic products are hereby granted a non-exclusive, revocable license to

reproduce and transmit this documentation for the purchaser's own internal business

purposes. Purchaser shall not remove or alter any proprietary notices, including copyright

notices, contained in this documentation and shall ensure that all notices appear on any

reproductions of the documentation.

Electronic versions of this document may be downloaded from the Datalogic website

(www.datalogic.com). If you visit our website and would like to make comments or sug-

gestions about this or other Datalogic publications, please let us know via the "Contact"

page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is

complete and accurate, however, Datalogic shall not be liable for technical or editorial

errors or omissions contained herein, nor for incidental or consequential damages result-

ing from the use of this material. Datalogic reserves the right to change any specification

at any time without prior notice.

Trademarks

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many

countries, including the U.S.A. and the E.U.

Magellan is a trademark of Datalogic S.p.A. or of Datalogic and/or its affiliates, registered

in many countries, including the U.S. and the E.U.

Patents

See www.patents.datalogic.com for patent list.

This manual refers to software version DR9401453.

ORIGINAL VERSION

See the Regulatory Addendum included with your product

for additional regulatory, safety and legal information.

QUICK REFERENCE GUIDE

III

TABLE OF CONTENTS

Features .......................................................................... 1

Installation ....................................................................... 2

How to Scan ..................................................................... 5

Scanner Button ............................................................................. 5

LED and Beeper Indicators ................................................ 7

Beeper Indicators.......................................................................... 8

Troubleshooting................................................................ 9

Error Codes.................................................................... 10

Programming ................................................................. 10

Interface Selection ...................................................................... 11

Cell Phone Mode ....................................................................12

Cell Mode Percent ..................................................................13

Cleaning......................................................................... 14

Manufacturer Approved Cleaning Materials.............................. 15

Warranty ........................................................................ 16

Going Green ................................................................... 17

Bar Code Mask ............................................................... 18

MAGELLAN™ 3510HSI

NOTES

QUICK REFERENCE GUIDE 1

MAGELLAN™ 3510HSI

Use this guide to quickly complete installation of the Magellan 3510HSi

series of bar code readers, and begin using your scanner. For more

details and programming information, reference the Product Reference

Guide (PRG), which is available for viewing and download from the

Datalogic website listed on the back cover of this manual.

FEATURES

Figure 1. Scanner Features - Top View

Top Cover

Scan

Connector Ports

Window

Speaker Grille

Cover Removal

Scanner

Lift Handles

Indentation

USB Micro B/

MicroSD Card

Button

(shown in Figure 2)

Regulatory/

Serial Number Label

(Service Access)

Installation

MAGELLAN™ 3510HSI

Figure 2. Connectors

INSTALLATION

Connect the scanner to the host (terminal) using the interface (I/F) cable

as shown in the following figures. A cable from an older existing

installation can be re-used only for RS-232 interfaces. If external power

is used/needed, plug the AC Adapter into the AC wall outlet, then

connect it to the unit as shown in Figure 4. If the scanner is powered

only by the standard USB cable as shown in Figure 5 on page 4, an

auxiliary scanner will not be supported.

After the scanner has fully powered up and indicates that it is ready for

operation, scan some known-good bar code samples to verify correct

operation. The scanner should beep and/or flash its good read LED1and

send the bar code data to the host or terminal. If not, use the

Troubleshooting section of this guide to identify any problems.

1. Beeper and LED behavior may have previously been configured as “disabled”

by another user.

POWER

USB

HOST

USB Aux Port

Host Port Power

Installation

QUICK REFERENCE GUIDE 3

Figure 3. USB + Power Cable Power Off the Terminal

Figure 4. Powered by AC Adapter

Terminal (PC)

RJ Host Port

Connector

Power

USB + Power Cable

Power Off the Terminal (POT)

RS-232 and USB Cables

To Terminal (PC)

Installation

MAGELLAN™ 3510HSI

Figure 5. USB Cable Type A Power Off the Terminal

NOTE: This cable (or similar) will not support a USB

peripheral. The system must be powered by 12V in order for

a peripheral to be attached to the AUX USB PORT.

To Terminal (PC)

USB Type A Power Off the

Terminal

How to Scan

QUICK REFERENCE GUIDE 5

HOW TO SCAN

The scanner is mounted flush with the counter to allow items to be slid

or pushed over its top in the direction of the arrow as shown in Figure 6.

Face the bar code toward the scanner or direction of scan to optimize

the scan rate.

Figure 6. Scanning Items

Scanner Button

The Scanner Button performs multiple functions, depending on how

long it is pressed:

NOTE: Volume changes made using the Scanner Button are

lost when the scanner is powered down and are reset to the

configured setting. If you wish to permanently change the

volume, use the programming labels in the Product

Reference Guide.

Product

Bar Code

LED Indicator

Slide or push items in the

direction of the arrow

How to Scan

MAGELLAN™ 3510HSI

PRESS

DURATION FUNCTION COMMENT

Momentary (when

scanner is asleep)

Wakes scanner from

Sleep Mode

Alternatively, the scanner can

be awakened by:

- Moving an object through the

scan zone.

- Scanning with an attached

auxiliary scanner.

Momentary (when

scanner is awake) Increments volume

Press the button momentarily

to increase speaker volume.

When the loudest volume is

reached, a repeated press of the

button cycles volume back to

the lowest setting, then volume

increases on subsequent

press(es). Five volume levels

are available.

Hold, then release

when the beeper

sounds

Increments tone

Press the button for

approximately 2 seconds, then

release. Each time this is done,

the beeper will sound at one of

three tones. Stop when the

desired tone (high, medium or

low) is sounded.

4 Seconds Scanner Diagnostics

Modea

This mode allows system

support personnel to

troubleshoot problems with the

scanner and is used to

determine if it can read bar

codes. Press the button for 10

seconds or cycle power to exit

Scanner Diagnostics Mode and

reset the scanner.

10 Seconds Resets ScannerbOnly system support personnel

should perform a reset.

a. By standard default, this function is normally disabled to prevent accidental

activation by users.

b. Users should not perform scanner resets except under the direction of

trained systems support personnel.

Table of contents

Other Datalogic Scanner manuals

Datalogic

Datalogic Gryphon I GPS4400 User manual

Datalogic

Datalogic TC1100-1100 User manual

Datalogic

Datalogic DS2200 SH2348 User manual

Datalogic

Datalogic MAGELLAN 3200VSI User manual

Datalogic

Datalogic Magellan CSS4400 User manual

Datalogic

Datalogic HandScanner MR User manual

Datalogic

Datalogic Magellan 9800i Installation and operation manual

Datalogic

Datalogic Magellan 1500i Installation and operation manual

Datalogic

Datalogic DS2100 User manual

Datalogic

Datalogic EtherNet/IP DS6 00 Series User manual

Datalogic

Datalogic DS1100 SH2347 User manual

Datalogic

Datalogic PreScan User manual

Datalogic

Datalogic DS8100 User manual

Datalogic

Datalogic AREX User manual

Datalogic

Datalogic LS2200-1 Series User manual

Datalogic

Datalogic Magellan 3450VSi Installation and operation manual

Datalogic

Datalogic CATCHER D531 Series User manual

Datalogic

Datalogic Matrix 300N Installation and operation manual

Datalogic

Datalogic PWR-480W User manual

Datalogic

Datalogic MAGELLAN 3410VSi User manual

Datalogic

Datalogic Matrix 450 User manual

Datalogic

Datalogic MAGELLAN 3410VSi Quick setup guide

Datalogic

Datalogic MAGELLAN 8400 User manual

Datalogic

Datalogic Gryphon I GPS4400 User manual

Popular Scanner manuals by other brands

Plustek

Plustek Scanner user guide

Z/I Imaging

Z/I Imaging PhotoScan 2001 instructions

Renkforce

Renkforce DS100-5M operating instructions

Image Access

Image Access WideTEK A2 Operation manual

Canon

Canon imageFORMULA CR-120N user manual

Fujitsu

Fujitsu FI-4860C2 Specifications

GeoSlam

GeoSlam ZEB Horizon Hardware guide

Kodak

Kodak i5800 Scanner Brochure & specs

Kodak

Kodak i7300 user guide

Revopoint

Revopoint POP user manual

Fujitsu

Fujitsu fi-4860C installation guide

Eddyfi Technologies

Eddyfi Technologies Floormap X user manual

Faselase

Faselase F6 user manual

Fujitsu

Fujitsu CardMinder user guide

Uniden

Uniden BC340CRS owner's manual

Infinite Peripherals

Infinite Peripherals INFINEA TAB M user manual

Mustek

Mustek PageExpress 4800 Pro user guide

Optex

Optex 750830 owner's manual