Faselase F6 User manual
Industrial 2D LiDAR
F6
USER MANUAL
(Version V8.01For more info
&supports, please visit
http://www.top1sensor.com
Content
1. Safety................................................................................................................................ -1-
1.1 Use of the instrument................................................................................. - 1 -
1.1.1 Allowed use range:.........................................................................................-1-
1.1.2 Disabled use range:........................................................................................ -1-
1.2 Scope of liability........................................................................................... - 1 -
1.3 Significant risks of incorrect use.............................................................. - 2 -
2. Specifications....................................................................................................................-3-
3. LiDAR pictures...................................................................................................................-5-
4. The operating mode......................................................................................................... - 7 -
4.1 Fixed Device.......................................................................................................... - 7 -
4.2 Measurement Range Schematic..................................................................... - 8 -
4.3 Connect the device............................................................................................. - 8 -
4.3.1 Wiring............................................................................................................. - 8 -
4.3.2 Software Running.........................................................................................- 13 -
4.3.3 Power supply................................................................................................- 14 -
5. Software setting...................................................................................................................- 14 -
5.1 Software interface introduction.................................................................... - 14 -
5.2 Operation Instruction.......................................................................................- 17 -
6. Troubleshooting............................................................................................................. - 20 -
6.1 Factors affecting the measurement range.................................................- 20 -
7. Standard and optional accessories...................................................................................... - 21 -
8. Contact us............................................................................................................................ - 22 -
High-speed Laser Distance Sensor
-1-
1. Safety
The following guidelines will allow the person in charge and users of the F6 to know in advance
the possible dangers in the operation and prevent them. The person in charge of the instrument
should ensure that all users read and follow this instruction.
The F6 is a precision optical instrument. If it is integrated into a system, the system vendor must
be responsible for all safety related issues, such as manuals, labeling and guidance.
1.1 Use of the instrument
1.1.1 Allowed use range:
● Distance measurement.
● Area Protection.
1.1.2 Disabled use range:
● Use the instrument without following the instructions.
● Use outside the range of the declaration.
● Acts of destroying the security system, removing the instructions and danger signs.
● Open the device with tools such as a screwdriver.
● Modify or upgrade the instrument.
● Use accessories from other manufacturers that are not approved by Faselase.
● Direct aiming at the sun.
● Deliberately appearing other dazzling targets in the field of vision, including in the
darkness.
● Use in survey site without safety facilities. (such as on the road, etc.)
1.2 Scope of liability
Responsibility of the original equipment manufacturer Faselase:
High-speed Laser Distance Sensor
-2-
FaseLase is responsible for providing products under complete safety conditions, including this
manual, software and original accessories.
Responsibility of non-FaseLase accessory manufacturers:
Non-FaseLase accessory manufacturers are responsible for the development, availability, and
safety instructions for their products. They are also responsible for the secure connection to
FaseLase products.
1.3 Significant risks of incorrect use
Warning
Do not operate without knowing how to use F6. It is the responsibility of the person in charge of
the instrument to inform the user of its dangers and how to prevent them.
Use under conditions suitable for human survival. Do not use in flammable or explosive
environment.
Do not point the F6 laser directly at the sun, as it will damage the instrument.
Do not point the F6 laser directly at the human eye for a long time. Although the F6 uses a Class
I human eye safety laser, long-term direct laser exposure may also cause damage to the human
eyes.
If the instrument is used in violation of the prohibition, it may result in personal injury,
instrument malfunction and loss.
Compilation of non-specified control, adjustment, or execution programs may result in serious
damages of the sensor or errors of the measuring data.
High-speed Laser Distance Sensor
-3-
2. Specifications
Items
Parameters
Model
F6
Scanning range
0.05m~6m
Scanning angle range
Radial, 280°
Scanning frequency
10Hz~25Hz (continuously adjustable, rated15Hz)
Angular resolution1
0.18~0.45°，rated 0.27°
Measurement error 2
±3cm
Minimum distance resolution
1cm
Statistical error3
σ≤2cm
Hardware interface
4×I/O Digital Inputs&4×I/O Digital Outputs;
USB
Laser source
Laser diode 905nm, light-emitting power ≤1mW,
Class I laser human eye safety requirements
Power supply
DC12~24V, Start-up current＞1A (12V);
Power consumption＜4W
Start-up time
Within 3 seconds
Ambient light immunity
Less than 80,000lx
Dimensions
62×62×82 mm
Operation ambient temperature
and air humidity
－10℃~ +50℃
85% RH below, no condensation, no icing
High-speed Laser Distance Sensor
-4-
Storage ambient temperature
and air humidity
－20℃~ +70℃
85%RH below, no condensation, no icing
EMC specification
EN 61326-1：2013；EN 61326-2-3:2013
Vibration resistance
10 -55Hz bilateral amplitude 1.4mm X, Y, Z
direction 2 hours each
Shock resistant
196m/s2(20G) X, Y, Z direction 10 times each
Design life
Use under standard conditions, 5 years
(motor, laser diode life)
Protection level
IP65
Weight
210 g
Housing
Polycarbonate，Aluminum alloy
Table 1: Specification
Notes:
1. The angular resolution is affected by scanning frequency. Angle resolution is smaller when low scanning
frequency, point cloud data is denser.
2. Measurement error refers to 90% reflectivity (Kodak white) measurement.in the standard environment.
3. Statistical error refers to the error of measuring distance when the lidar scanning plane is parallel to 90%
reflectivity (Kodak white).
4. The difference between the scanning plane and the angle of incoming light needs to be greater than 5
degrees.
High-speed Laser Distance Sensor
-5-
3. LiDAR pictures
Figure 1: 3D rendering
Figure 2: Mechanical dimension drawing
High-speed Laser Distance Sensor
-6-
Figure 3: Front dimension drawing
LED status
Round
Triangular
Green
On
Working
Flash
Pause
Orange
On
Output3 triggered
Flash
Output1 triggered
Red
On
Fault
Flash
Changing input group
Blue
On
Output4 triggered
Flash
Output2 triggered
Table 2: LED Indicator Status
High-speed Laser Distance Sensor
-7-
The LEDs on the front board of LiDAR can indicate the current operation status, which are
divided into two categories: working status and trigger status. The working status class indicator
includes "Working", "Pause", "Fault", " Changing input group ", the priority is sorted from high
to low as fault, Pause, Changing input group, Working. The trigger class indicator is Output 1-4
triggered. In the case where multiple protection zones are triggered, the indicator status of the
LEDs triggered shows priority 1>2>3>4. For example, when there are obstacles in the four areas
1, 2, 3, and 4, the indicator light only shows an orange LED flashing, and when there are
obstacles in the two areas 2 and 4, the light only shows a blue light flashing. Digital output
signals can be detected independently when triggered despite of LED priority.
4. The operating mode
4.1 Fixed Device
Figure 4: the bottom fixed schematic
1.The back and bottom of the device is secured with M3 screws with a bottom depth of about
8mm and a back depth of about 6mm.
2.The device can also be secured on the back, see Figure 15, Figure16.
High-speed Laser Distance Sensor
-8-
4.2 Measurement Range Schematic
Figure 5: diagram of the scanning range
The measurement schematic is a top view, the shaded part of Figure 5 is the scanning area, the
scanning range is from 310 to 230 degrees and blind zone is between 230 and 310 degrees, no
measurement data output.
4.3 Connect the device
4.3.1 Wiring
Note: The voltage supply for both DC-Power and IO-Power is between 12V-24V, DC-GND and
IO-GND are not inner connected to ground. IO digital signal function will not be booted until
IO-Power and IO-GND are connected. The maximum value of the I/O output voltage signal is
determined by the I/O power supply and load circuit.
Table of contents
Other Faselase Scanner manuals
