Danfoss ERC 211 User manual

Installation Guide

ERC 211

Digital controller for refrigeration and defrost, 1 relay.

| 2 DKRCE.PI.RL0.F6.MLInstruction sheet | ERC 211

Dimensions (mm) and Mounting

83 66

Rear mounting (lock with clips)

Drilling template

Mounting Dismounting

61.2

| 3DKRCE.PI.RL0.F6.ML Instruction sheet | ERC 211

Electrical Connections

DO1

SairSc/DI1

3L 4N 567891011121

~~~~

Sair

DO1

Power supply

(according to the product code number)

Quick programming tools:

KoolKey KoolProg KoolDock

Connectors:

Max. Torque = 0.4 Nm

| 4 DKRCE.PI.RL0.F6.MLInstruction sheet | ERC 211

The ERC 211 is a smart, multipurpose refrigeration controller with temperature and defrost management,

available with 1 relay.

The controller has been designed to fulﬁl today’s requirements for commercial refrigeration applications.

ENGLISH

1 - Technical Highlights

yEase of use: Four buttons, easy menu structure, pre-installed application solutions ensure superior usability.

ySimple installation:

High Eﬀect 16 A relay enable direct connection of heavy loads without use of intermediate relay: up to 2 hp

compressors depending on its power factor and motor eﬃciency (greater than 0.65 for 230 V and greater than 0.85

for 115 V).

A wide range of compatible types of sensors and screw connection terminals ensure highly ﬂexible installation.

yUnit protection: Special software features like compressor protection from ﬂuctuation in the power supply or from

high condensing temperature ensure the safe operation of the unit.

yEnergy eﬃciency: Defrost on demand, day/night mode and smart evaporator fan management ensure energy

eﬃciency.

| 5DKRCE.PI.RL0.F6.ML Instruction sheet | ERC 211

2 - User Interface

Press for one second: BACK

Press and hold: PULL-DOWN

Press for one second: UP

Press and hold: ON/OFF

Press for one second:

TEMPERATURE SETPOINT/OK

Press and hold: MENU

Press for one second: DOWN

Press and hold: DEFROST

Key Function

Press and hold at power up:

FACTORY RESET

(“FAC”is displayed)

Display Icons

Night mode

(Energy saving) Fan running Defrost

Compressor running

Flashes in pull-down mode Active alarm Unit (°C or °F)

ENGLISH

| 6 DKRCE.PI.RL0.F6.MLInstruction sheet | ERC 211

3 - Quick Conﬁguration at Power Up

ySTEP 1: Power on

ySTEP 2: Select the quick conﬁguration menu

Within 30 seconds of power on, press“<”BACK for 3 seconds.

The main switch“r12”is automatically set to OFF.

ySTEP 3: Select pre-installed application “o61”

The display automatically shows the application selection parameter“o61”.

Press SET to select the pre-installed application.

The display shows the default value (eg.“AP0”ﬂashing).

Choose the application type by pressing UP/DOWN and press SET to conﬁrm.

The controller presets parameter values according to the selected application and does not hide relevant parameters.

Tip: you can easily move from AP0 to AP5, and thus select the simpliﬁed list of parameters, by pressing the UP key

(circular list).

App Description

App 0 None (no preset application)

App 1Medium temperature (4 – 20 °C), without defrost

App 2Medium temperature (2 – 6 °C), with timed natural defrost

App 3Medium temperature (2 – 6 °C), with natural defrost stop on air temperature

App 4Heating Thermostat (20 – 60 °C)

App 5None (no preset application) with simpliﬁed parameter list

ENGLISH

| 7DKRCE.PI.RL0.F6.ML Instruction sheet | ERC 211

Quick Conﬁguration at Power Up

ySTEP 4: Select sensor type“o06”

The display automatically shows sensor selection parameter“o06”.

Press SET to select the sensor type.

The display shows the default value (eg.“n10”ﬂashing).

Choose sensor type by pressing UP/DOWN (n5=NTC 5 K, n10=NTC 10 K, Ptc=PTC, Pt1=Pt1000) and press SET

to conﬁrm.

NOTE: All sensors must be the same type.

ENGLISH

| 8 DKRCE.PI.RL0.F6.MLInstruction sheet | ERC 211

4 - Menu structure

1) Parameter groups

2) Parameter name

Scroll through the

parameter groups

SET: press for 3 seconds to access

status, setup and service

Password (if enabled)

Status input

Conﬁguration

Main switch

Application

Sensor type

SET

Scroll through the

parameter names

SET

3) Value

Application 0

Application

5-4-3-2-1

Application

1-2-3-4-5

ENGLISH

| 9DKRCE.PI.RL0.F6.ML Instruction sheet | ERC 211

5 - Quick Conﬁguration via “cFg” Menu

yPress SET for three seconds to access the parameters groups.

ySelect “CFg” menu and press SET to enter. The ﬁrst menu“r12”(main switch) is displayed.

ySwitch OFF main switch (r12=0) for changing the pre-installed application.

yPress UP/DOWN to scroll through the parameter list.

yConﬁgure the “o61”parameter to select a pre-installed application

- Press SET to access the “o61” parameter.

- Press UP/DOWN to select an application (AP0= no application selected).

- Press SET to conﬁrm, “o61” is displayed.

yContinue to set the next parameters (“o06”sensor type) in the “cFg”menu.

ENGLISH

| 10 DKRCE.PI.RL0.F6.MLInstruction sheet | ERC 211

6 - Basic operation

Initiate a manual defrost

Adjust the setpoint temperature

DEFROST: press for 3 seconds to initiate a defsost.

The DEFROST icon is shown during defrost.

DEFROST: press for 3 seconds to stop manual defrost.

(short press) SET: adjust setpoint temperature.

UP/DOWN: change the temperature setpoint

(in setting mode the setpoint ﬂashes).

SET: save the temperature setpoint.

ENGLISH

Other manuals for ERC 211

This manual suits for next models

Table of contents

Languages:

Other Danfoss Controllers manuals

Danfoss

Danfoss SAF VFU21 Series User manual

Danfoss

Danfoss VLT Micro Drive FC 51 Series Operating instructions

Danfoss

Danfoss AK-CC 460 User manual

Danfoss

Danfoss VLT FC 100 User manual

Danfoss

Danfoss TWA-Z User manual

Danfoss

Danfoss VLT Compact Starter MCD 201 User manual

Danfoss

Danfoss AMD 610 AS User manual

Danfoss

Danfoss EKC 202A User manual

Danfoss

Danfoss ECL Comfort 210 User manual

Danfoss

Danfoss MCV105C User manual

Danfoss

Danfoss MCI 15 User manual

Danfoss

Danfoss A266 Series Installation instructions manual

Danfoss

Danfoss Link HC User manual

Danfoss

Danfoss AK-PC 772A User manual

Danfoss

Danfoss TERMIX PM2+P User manual

Danfoss

Danfoss ERC 214 User manual

Danfoss

Danfoss AMV 610 User manual

Danfoss

Danfoss ECL Comfort 310 User manual

Danfoss

Danfoss AME 445 User manual

Danfoss

Danfoss EKC 347 User manual

Danfoss

Danfoss ACCSCS User manual

Danfoss

Danfoss EKC 202B User manual

Danfoss

Danfoss EKD 316C Colibri User manual

Danfoss

Danfoss AME 55QM User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual