Danfoss ECL Comfort 296 User manual
© Danfoss |2021.01 AQ070386470176en-010301 | 1
Connection of ECL Comfort 296 / 310 controller
to wireless network (WLAN)
Operating Guide
1.0 Contents
1.0 Contents .............................................................................................................................................................................................................................................. 1
2.0 Introduction ....................................................................................................................................................................................................................................... 2
2.1 Use the ECL Comfort 296 / 310 in SCADA systems via WLAN ......................................................................................................................................... 2
2.2 What is a wireless brigde? ............................................................................................................................................................................................................ 2
3.0 System overview ............................................................................................................................................................................................................................... 2
3.1 Components..................................................................................................................................................................................................................................... 2
3.2 Wireless internet router................................................................................................................................................................................................................. 3
3.3 Wireless bridge................................................................................................................................................................................................................................. 3
3.4 Configure the wireless bridge .................................................................................................................................................................................................... 3
3.5 Select wireless network to be used for wireless bridge .................................................................................................................................................... 4
3.6 Configure ECL Comfort 296 / 310 controller to local network........................................................................................................................................ 4
2 | © Danfoss| 2021.01 AQ070386470176en-010301
Operating guide ECL 296 / 310 Comfort to WLAN
2.0 Introduction
2.1 Use the ECL Comfort 296 / 310 in SCADA systems via WLAN
The ECL Comfort 296 / 310 controller has a built-in ethernet interface
which enables it to connect to the local network (LAN) via a standard
ethernet cable.
By connecting the ECL Comfort 296 / 310 to the local network and/
or the internet the ECL Comfort 296 / 310 can be used in SCADA
systems like the Danfoss ECL Portal.
In some installations it may be prefered to use wireless network
(WLAN) instead. In such cases the ECL Comfort 296 / 310 can easily
connect to a wireless network by using a wireless bridge.
2.2 What is a wireless brigde?
The function of the wireless bridge is to be a bridge between a
wireless network (WLAN) and an ethernet network (LAN).
By using a wireless bridge a device like the ECL Comfort 296 / 310
can connect to the wireless network and/or the internet using its
standard ethernet interface.
3.0 System overview
3.1 Components
The components of interest are shown in the picture below.
A new or existing wireless internet connection (WLAN) is made
available by the wireless internet router in the building.
A wireless bridge is added to the heating installation and the ECL
Comfort 296 / 310 is connected to the wireless bridge using a standard
ethernet cable.
Wireless internet router Wireless bridge ECL Comfort 296 / 310
(Netgear WN3000RP)
© Danfoss | 2021.01 | 3
AQ070386470176en-010301
Operating guide ECL 296 / 310 Comfort to WLAN
3.2 Wireless internet router
This is a standard wireless internet router which may already be avail-
able in the building providing a wireless internet connection.
To connect to the wireless internet the name of the wireless network
(SSID) and the password must be known.
3.3 Wireless bridge
The wireless bridge is the extra electronic device needed to make
the ECL Comfort 296 / 310 able to connect to the wireless internet
connection.
Several wireless bridges are available on the market, but the one
from Netgear (type WN3000RP) shown in the picture is very simple
to install and configure.
The wireless bridge is inserted into the mains plug and a standard
network cable is connected from the side of the wireless bridge to
the ECL Comfort 296 / 310 ethernet connection.
Netgear (type WN3000RP).
3.4 Configure the wireless bridge
Prior to connecting the wireless bridge to the ECL Comfort 296 /
310 it has to be configured by following the Netgear wizard.
The Netgear wizard is accessed by connecting a computer to the
ethernet connector of the wireless bridge, opening an internet
browser and entering www.mywifiext.net in the address field.
Select the wireless network to be used by the ECL Comfort 296 / 310 in the
Netgear Wizard.
4 | © Danfoss| 2021.01 AQ070386470176en-010301
Operating guide ECL 296 / 310 Comfort to WLAN
3.5 Select wireless network to be used for wireless bridge
The Netgear wizard asks for wireless network to be used by the wire-
less bridge. Select the wireless network.
The Netgear wizard now asks for the password to the selected wire-
less network. Enter the password.
The wireless bridge is then completing the configuration and the
ethernet connection on the side of the wireless bridge can now be
connected to the ECL Comfort 296 / 310.
Enter passphrase for the selected wireless network.
3.6 Configure ECL Comfort 296 / 310 controller to local net-
work
The ECL Comfort 296 / 310 controller must be configured to con-
nect to the local network (LAN).
If the ECL Portal is used as SCADA system then the ECL Comfort
296 / 310 must be configured for DHCP instead of STATIC in the
System>Ethernet menu and the ECL Portal feature must be ena-
bled in the System>Portal Config menu.
If used with ECL Portal: Configure for DHCP.
Enable the ECL Portal in the Portal Config menu.
Disposal note
This symbol on the product indicates that it may not be disposed of as household waste.
It must be handed over to the applicable take-back scheme for the recycling of electrical and electronic equipment.
• Dispose of the product through channels provided for this purpose.
• Comply with all local and currently applicable laws and regulations.
© Danfoss | 2021.01 | 5
AQ070386470176en-010301
Operating guide ECL 296 / 310 Comfort to WLAN
6 | © Danfoss| 2021.01 AQ070386470176en-010301
Operating guide ECL 296 / 310 Comfort to WLAN
© Danfoss | 2021.01 | 7
AQ070386470176en-010301
Operating guide ECL 296 / 310 Comfort to WLAN
AQ070386470176en-010301
8 | © Danfoss | DHS-SMDT/DK | 2021.01
Operating guide ECL 296 / 310 Comfort to WLAN
*087H9125*
Other manuals for ECL Comfort 296
6
This manual suits for next models
1
Table of contents
Other Danfoss Controllers manuals
Danfoss
Danfoss EKE 1A User manual
Danfoss
Danfoss VLT FC Series Spare Brake IGBT User manual
Danfoss
Danfoss VLT MCD 200 User manual
Danfoss
Danfoss AME 140X User manual
Danfoss
Danfoss AK-PC 530 User manual
Danfoss
Danfoss ECL Comfort 100M User manual
Danfoss
Danfoss AK-PC 530 User manual
Danfoss
Danfoss NovoCon Series User manual
Danfoss
Danfoss ECL Comfort 110 User manual
Danfoss
Danfoss AK-PC 420 User manual
Danfoss
Danfoss VLT AutomationDrive FC 300 Guide
Danfoss
Danfoss AME 110 NL User manual
Danfoss
Danfoss EIM 336 User manual
Danfoss
Danfoss VT2800 Series Guide
Danfoss
Danfoss VLT 6000 HVAC User manual
Danfoss
Danfoss AME 655 User manual
Danfoss
Danfoss AME 335 User manual
Danfoss
Danfoss AVT/VG User manual
Danfoss
Danfoss EKC 361 User manual
Danfoss
Danfoss AFQ 2 User manual
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
