Danfoss ICAD Series User manual

027R9776

027R9776

© Danfoss | DCS (ms) | 2020.01 AN331637222900en-000101 | 1

Installation Guide

ICAD Actuators

Mechanical installation of ICAD on ICM

Included in the ICAD box:

New EPDM O-ring New PTFE ring Molycote 55 grease

1. Remove existing O-ring and PTFE ring* on the ICM adapter with your ﬁngers.

Do not use any tool because it may damage the O-ring/PTFE ring

2. Install the new PTFE ring*

3. Apply Molycote 55 grease in groove below o-ring

4. Apply Molycote 55 grease on the EPDM O-ring

5. Install the new EPDM O-ring in groove

6. Observe that Molycote 55 grease is distributed, in the groove,

all around the ICM adapter

7. Apply a very thin ﬁlm of Molycote 55 around and on the ICAD magnets

8. Turn all 3 set screws about 3 turns clockwise

and then counterclockwise back to its original

position

O-ring

PTFE ring

Groove where ICAD

set screws are fastend

This Installation guide cover installation of ICAD

•on complete new ICM top part (function module)

•on ICM top part already in operation

*If the ICM top part is new there is no need to replace PTFE ring

Clockwise Counterclockwise

ICM bonnet

© Danfoss | DCS (ms) | 2020.012 | AN331637222900en-000101

4.

Install the ICAD actuator on the ICM adapter making sure it is pushed

completely down. Fasten the the 3 set screws using a 2.5 mm hexagon key.

Note!

Crosstighthen all 3 screws to ensure equal tightening.

Max 3 Nm torque.

For ICM in operation

When ICAD is in

stalled/serviced, on a cold/frozen valve; do the following:

1.

Make sure the old grease is totally removed before mounting a new EPDM

O-ring and PTFE support ring.

2.

If there is any ice or moisture present, it must be removed prior to applying

the grease.The ice/moisture can be removed with an electrical hot air gun.

3.

After ice removal by heater, ensure that the ICM adapter is totally dry before

mounting new EPDM O-ring and PTFE support ring

Table of contents

Other Danfoss Controllers manuals

Danfoss

Danfoss VLT MCD 200 User manual

Danfoss

Danfoss ECL Comfort 210 Installation instructions manual

Danfoss

Danfoss AK-PC 420 User manual

Danfoss

Danfoss PVE Series User manual

Danfoss

Danfoss VLT HVAC User manual

Danfoss

Danfoss HFX Series User manual

Danfoss

Danfoss MCO 305 User manual

Danfoss

Danfoss VLT 6000 User manual

Danfoss

Danfoss AME 23 SU User manual

Danfoss

Danfoss PVED-CLS User manual

Danfoss

Danfoss ECL Comfort 301 User manual

Danfoss

Danfoss AME 410 User manual

Danfoss

Danfoss PLUS+1 Series Manual

Danfoss

Danfoss NovoCon S Digital User manual

Danfoss

Danfoss AK-CC55 User manual

Danfoss

Danfoss AMEi 6 iNET User manual

Danfoss

Danfoss AME 435 QM User manual

Danfoss

Danfoss EKC 202B User manual

Danfoss

Danfoss AMV 110 NL AQT User manual

Danfoss

Danfoss VTL MCD 203 Series User manual

Danfoss

Danfoss ECL Comfort 210 User manual

Danfoss

Danfoss VLT AutomationDrive FC 300 Guide

Danfoss

Danfoss AK-PC 551 User manual

Danfoss

Danfoss AK-SM 800 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual