Danby DPA110DHA1CP Assembly instructions

• OWNER’S USE AND CARE GUIDE

• GUIDE D’UTILISATION ET D'ENTRETIEN

MODEL • MODÈLE

FOR YOUR SAFETY: Read these instructions carefully before operating the unit.

POUR VOTRE SÉCURITÉ: Lire attentivement ces instructions avant d’utiliser l’appareil.

ENGLISH

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9

DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840 08.09.14

PORTABLE AIR CONDITIONER

CLIMATISEUR PORTATIF

DPA110DHA1CP

DO NOT RETURN THIS UNIT TO THE RETAILER

WITHOUT FURTHER INSTRUCTIONS

Dear valued customer, we hope your Danby product purchase fulfills all

your requirements. Your satisfaction is our priority!

Please contact us at our toll free consumer service number for any inquiries

you may have about your new unit.

NE PAS RETOURNER CET APPAREIL CHEZ LE

DÉTAILLANT SANS CONSIGNES SUPPLÉMENTAIRES

Cher(ère) client(e) important(e), nous espérons que votre produit Danby

répond à tous vos besoins. Votre satisfaction est notre priorité!

Veuillez nous contacter au numéro gratuit de service après-vente, si

vous avez des questions quelconques à propos de votre nouvel appareil.

NO DEVUELVA ESTA UNIDAD A LA TIENDA SIN

INSTRUCCIONES ADICIONALES

Estimado cliente, esperamos que el producto Danby que ha comprado

satisfaga completamente sus necesidades. Su satisfacción

es nuestra prioridad!

Por favor, contáctenos gratuitamente a nuestro número de Servicio al

Cliente para cualquier pregunta que tenga sobre su nuevo electrodoméstico.

1-800-263-2629

(1-800-26-DANBY)

Danby 28.08.2014

TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDE A VALID PROOF OF

PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE

REFERENCE.

POUR OBTENIR LE SERVICE SUR GARANTIE, VOUS DEVEZ FOURNIR UNE

PREUVE D’ACHAT VALIDE. VEUILLEZ AGRAFER VOTRE REÇU À CETTE PAGE

POUR RÉFÉRENCE FUTURE.

This product is factory equipped with a power supply cord that has a three-pronged grounded plug. It must

be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and

applicable local codes and ordinances. If the circuit does not have a grounding type receptacle, it is the

responsibility and obligation of the customer to exchange the existing receptacle in accordance with the

National Electrical Code and applicable local codes and ordinances. The third ground prong should not,

under any circumstances, be cut or removed. Never use the cord, the plug or the appliance when they show

any sign of damage. Do not use your appliance with an extension cord unless it has been checked and test-

ed by a qualiﬁed electrician or electrical supplier.

IMPORTANT - GROUNDING METHOD

Ce produit arrive d’origine avec un cordon d’alimentation équipé d’une prise à trois ﬁches. Il doit être

branché dans une prise avec une ﬁche de mise à la terre en conformité avec le Code national de l’électricité

et les codes et règles locaux applicables. Si la prise murale n’a pas de mise à la terre, il est de la

responsabilité et l’obligation du client de changer la prise existante pour la rendre conforme au Code

national de l’électricité et aux codes et règles locaux applicables. La ﬁche de mise à la terre ne doit pas, en

aucune circonstance, être coupée ou retirée. Si vous apercevez des signes de dommage, n’utilisez jamais le

cordon d’alimentation, la prise ou l’appareil. N’utilisez jamais l’appareil avec une rallonge sauf si elle a été

vériﬁée et testée par un électricien qualiﬁé ou un fournisseur de matériel électrique.

IMPORTANT - MÉTHODE POUR LA MISE À LA TERRE

PORTABLE AIR CONDITIONER

Owner’s Use and Care Guide .................................

• Welcome

• Important Safety Information

• Features

• Installation Instructions

• Operation Instructions

• Care and Maintenance

• Troubleshooting

• Warranty

CLIMATISEUR PORTATIF

Guide d’utilisation et d’entretien................................

• Bienvenue

• Consignes de sécurité importantes

• Caractéristiques

• Consignes d’installation

• Consignes d’utilisation

• Soins et entretien

• Dépannage

• Garantie

CONTENTS

CAUTION:

Read and follow all safety rules and operating

instructions before ﬁrst use of this product.

AVERTISSEMENT :

Veuillez lire attentivement les consignes de

sécurité et les instructions d’utilisation avant

l’utilisation initiale de ce produit.

TABLE DES MATIÈRES

Model • Modèle

WARNING

Improper connection of the grounding plug can

result in risk of ﬁre, electric shock and/or injury to

persons associated with the appliance. Check with

a qualiﬁed service representative if in doubt that

the appliance is properly grounded.

AVERTISSEMENT

Une ﬁche de mise à la terre mal branchée peut

entraîner un risque d’incendie, de choc électrique

ou de blessures aux personnes qui utilisent

l’appareil. Si vous n’êtes pas certain que l’appareil

est correctement mis à la terre, consultez un

préposé du service qualiﬁé.

DPA110DHA1CP

1-15

16-30

Welcome

Welcome to the Danby family. We are proud of our quality products, and we believe in dependable service, like you will

find in this Owner’s Use and Care Guide, and like you will receive from our friendly customer service department. Best

of all, you will experience these values each and every time you use your Danby appliance. That is important, because

your new appliance will be a part of your family for a long time.

Note the information below; you will need this information to obtain service under warranty.

To receive service, you must provide the original receipt.

Serial Number:

Date of Purchase:

NEED HELP?

Before you call for service, here are a few things you can do to help

us serve you better:

Read this Owner’s Use and Care Guide:

It contains instructions to help you use and maintain your

appliance properly.

If you received a damaged appliance:

Immediately contact the retailer (or builder) that sold you the

appliance.

Save time and money:

Check the Troubleshooting section at the end of the guide before call-

ing. This section helps you solve common problems that may occur.

If you do need service, you can relax, knowing help is only a phone

call away.

1-800-26-

(1-800-263-2629)

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be

followed. Incorrect operation resulting from ignoring these instructions may cause harm or damage.

SAFETY

PRECAUTIONS

ALWAYS DO THIS

Your air conditioner should be used in such a way that it is protected from

moisture. e.g. condensation, splashed water, etc. Do not place or store

your air conditioner where it can fall or be pulled into water or any other

liquid. Unplug unit immediately if this occurs.

Always transport your air conditioner in a vertical position and place on a

stable, level surface during use. If the unit is transported laying on its side it

should be stood up and left unplugged for 4 hours.

Turn off the unit when not in use.

Always contact a qualiﬁed person to perform repairs. If the power cord is

damaged it must be repaired by a qualiﬁed technician.

Keep the unit away from walls, furniture and curtains with a clearance of at

least 30 cm all around.

If the air conditioner is knocked over during use, turn off the unit and

unplug it immediately.

Always use the switch on the control panel to turn the unit on or off.

Portable air conditioners exhaust large amounts of room air. Always ensure

an adequate supply of make-up air to operate efﬁciently.

NEVER DO THIS

Do not operate your air conditioner in a wet room such as a bathroom or

laundry room.

Do not touch the unit with wet or damp hands.

Do not press the buttons on the control panel with anything other than your

ﬁngers.

Do not remove any ﬁxed components. Never use this appliance if it is not

working properly, or if it has been dropped or damaged.

Never use the plug to start and stop the unit.

Do not cover or obstruct the inlet of outlet grilles.

Do not use hazardous chemicals to clean or come into contact with the unit.

Do not use the unit in the presence of inﬂammable substances or vapour

such as alcohol, insecticides, gasoline, etc.

Do not allow children to operate the unit unsupervised.

Do not use this product for functions other than those described in this

instruction manual.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be

followed. Incorrect operation resulting from ignoring these instructions may cause harm or damage.

ENERGY SAVING

TIPS

OPERATING

CONDITIONS

TOOLS FOR

WINDOW KIT

INSTALLATION

• Use the unit in the recommended room size.

• Locate the unit where furniture cannot obstruct the air ﬂow.

• Keep blinds/curtains closed during the sunniest part of the day.

• Keep the ﬁlters clean.

• Keep doors and windows closed to keep cool air in and warm air out

(cooling mode)

MODE TEMPERTURE

Air conditioning 16°C ~ 32°C (61°F ~ 89°F)

The air conditioner must be operated within the temperature range

indicated below:

Note: Performance may be reduced outside of these operating tempera-

tures.

1. Screwdriver (medium size, Phillips)

2. Tape measure or ruler

3. Knife or scissors

4. Saw (In the event that the window kit needs to be cut down in size

because the window is too narrow for direct installation).

See www.danby.com for general instruction guide

The power cord supplied with this air conditioner contains a device that senses damage to the power cord. To test if your

power cord is working properly, you must do the following:

1. Connect the power supply cord to an electrical outlet.

2. The power supply cord has two buttons located on the head of the plug. One button is marked “TEST”, and the other

is marked “RESET”. Press the “TEST” button; you will hear a click as the “RESET” button pops out.

3. Press the “RESET” button; you will hear a click as the button engages.

4. The power supply cord is now energized and supplying electricity to the air conditioner (on some products this is also

indicated by a light on the plug head).

NOTE: The power cord supplied with this air conditioner contains a current leakage detection device designed to reduce

the risk of ﬁre. In the event the power supply cord is damaged, it cannot be repaired and must be replaced with a new

cord from the product manufacturer.

• Under no circumstances should this device be used to turn the unit on or off.

• The “RESET” button must always be pushed in (engaged) for correct operation.

• The power supply cord must be replaced if it fails to reset when the “TEST” button is pushed in.

NOTE: Some plugs have buttons on the top.

POWER SUPPLY CORD

Plug in and press

RESET

TEST

RESET

Identifying Parts

WARNING

• Do not store or use gasoline or other ﬂammable vapours and liquids in the vicinity of this or any other

appliance.

• Avoid ﬁre hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any

prong from the power cord.

ELECTRICAL INFORMATION

WARNING

• Be sure the electrical supply is adequate for the model you have chosen. This information can be found

on the serial plate, which is located on the side of the cabinet and behind the grille.

• Be sure the air conditioner is properly grounded. To minimize shock and ﬁre hazards, proper grounding

is important. The power cord is equipped with a three-prong grounding plug for protection against

shock hazards.

• Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you

intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a

qualiﬁed electrician install the proper receptacle.

• Ensure the receptacle remains accessible after the unit is installed.

TABLE 2

Receptacle and Fuse Types

Rated Volts 125

Amps 15

Wall Outlet

Fuse Size 15

Time Delay Fuse Plug Type

(or Circuit Breaker)

TABLE 1

Suggested Individual Branch Circuit

Nameplate Amps

10.8

*AWG Wire Size

AWG- American Wire Gauge

*Based on copper wire at 105°C temperature rating

1. All wiring must comply with local and national electrical codes and must be installed by a qualiﬁed electrician. If you

have any questions regarding the following instructions, contact a qualiﬁed electrician.

2. Check available power supply and resolve any wiring problems BEFORE installing and operating this unit.

3. This 115V air conditioner uses 10.8 or less nameplate amps and may be used in any properly wired, general-purpose

household receptacle. See Table 1 for the speciﬁcations for the individual branch circuit.

4. For your safety and protection, this unit is grounded through the powercord plug when plugged into a matching wall

outlet. If you are not sure whether your wall outlet is properly grounded, please consult a qualiﬁed electrician.

5. The wall outlet must match the 3-prong plug on the service cord supplied with the unit. DO NOT use plug adapters.

See Table 2 for receptacle and fuse information.

Identifying Parts

ACCESSORIES

• Ensure that all the accessories are included in the

package and refer to the installation instructions

for their usage.

Note: All the illustrations in this manual are for ex-

planatory purposes only. Your air conditioner may be

slightly different.

UNIT STRUCTURE

ELECTRIC SHOCK HAZARD: To avoid the possibility of person-

al injury, disconnect power to the unit before installing or servic-

ing.

Installation Accessories:

• Flexible exhaust hose (ø 13cm)

• Exhaust nozzle connecter (ﬁx to unit, 2 pcs, 1/set)

• Adjustable window door slider kit (3 pcs) from 28 1/3” (72cm)

up to 80” (203cm).

• Fixture (2 pc)

• Screws (8 pcs)

NOTE: The exhaust / window kit must be installed at all times

when the unit is operating under AIR CONDITIONING mode.

There should be at least 11.8” (30cm) clearance between the unit

and any other objects or building structures, and the unit should

be installed on a level ﬂoor. The unit does not have to be vented

outside during dehumidifying or fan only mode operation. When

the unit is in dehumidifying mode, the warm air exhaust must be

vented inside the room.

Instructions for assembling the window adapter kit (Fig. 2)

1. Insert tube adapters through the back of the window panel.

2. Secure each tube adapter with four screws through the front

of the window panel.

3. Insert window panel extensions into window panel. Lightly

tighten the screws in the window panel to hold the extensions

in place.

Control panel

Air outlet

Handle hole

Caster

Air intake

(Evaporator)

Air outlet

(heat exchange)

Power supply cord

Water outlet drain

Air filter

Air intake

(condenser)

Water outlet drain

(for continuous

drain operation for

dehumidify mode only)

Exhaust nozzle

connector

(Fix to window kit)

Exhaust nozzle

connector

(Fix to unit)

Installation Instructions

LOCATION • The air conditioner should be placed on a ﬁrm foundation to minimize noise

and vibration. For safe and secure positioning, place the unit on a smooth, level

ﬂoor strong enough to support the unit.

• The unit has casters to aid placement, but it should only be rolled on smooth,

ﬂat surfaces. Use caution when rolling on carpeted surfaces. Use caution and

protect ﬂoors when rolling over wood ﬂoors. Do not attempt to roll the unit over

objects.

• The unit must be placed within reach of a properly rated grounded socket.

• Never place any obstacles around the air inlet or outlet of the unit.

• Allow at least 30 cm of space away from the wall for efﬁcient air conditioning.

WINDOW SLIDER KIT

INSTALLATION

Your window slider kit has been designed to ﬁt most standard vertical and hori-

zontal window applications, however, it may be necessary for you to modify some

aspects of the installation procedures for certain types of windows.

NOTE: If the window opening is less than the mentioned minimum length of the

window slider kit, cut the end without the hole in it short enough to ﬁt in the window

opening. Never cut out the hole in window slider kit (visit www.danby.com for

general instruction videos).

Air condtioning mode ONLY

Your window kit has been designed to ﬁt most standard “vertical” / “horizontal” windows up to a maximum height of 80”

(203cm). For vertical window applications, multi lock positions are provided on the edge of each slider section to secure

each sliding section together.

1. Select a suitable location, making sure you have access to an electrical outlet.

2. Install the ﬂexible hose to the rear side of the unit. Insert the hose collar on top of the exhaust opening and twist to

lock into position.

3. Install the adjustable window slider kit as required (see Fig. 3a and 3b).

4. Install the opposite end of the ﬂexible exhaust hose into the window exhaust adapter.

5. Install the window exhaust adapter into opening in the slider section, making sure the window slider sections are

secure.

6. Plug the unit into a 115V/60Hz grounded electrical outlet.

Table of contents

Languages:

Other Danby Air Conditioner manuals

Danby

Danby DPAC7099 Assembly instructions

Danby

Danby DPA120DBAUGDB User manual

Danby

Danby SAC5299 User manual

Danby

Danby DAC120EB3WDB User manual

Danby

Danby DAC5020 User manual

Danby

Danby dac12077ee Assembly instructions

Danby

Danby DDR556RH User manual

Danby

Danby DPA050E2WDB-RF User manual

Danby

Danby Premiere DPAC 13009 Assembly instructions

Danby

Danby DAC145EB6WDB-RF User manual

Danby

Danby DPAC10099 Assembly instructions

Danby

Danby DAC5130 User manual

Danby

Danby DPA060B7WDB User manual

Danby

Danby DPA120HEAUBDB User manual

Danby

Danby DAC080EB1WDB User manual

Danby

Danby DPA100HB1BDB-6 User manual

Danby

Danby Diplomat DAC5040 User manual

Danby

Danby DPA060CB4WDB User manual

Danby

Danby DAC12078EE User manual

Danby

Danby DVAC10038E User manual

Danby

Danby DPAC9006 User manual

Danby

Danby DAC5012M Assembly instructions

Danby

Danby DHCC6020 User manual

Danby

Danby DAC060BEUWDB Assembly instructions

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual