Danby DPAC10099 Assembly instructions

Owner’s Use and Care Guide

Guide d’utilisation et soins de Propriètaire

Model • Modèle

DPAC 10099

PORTABLE AIR CONDITIONER

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

CLIMATISEUR PORTATIF

Table des matières . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Danby Products Ltd, PO Box 1778, Guelph, Ontario Canada N1H 6Z9

Danby Products Inc, PO Box 669, Findlay, Ohio USA 45839-0669

Version 2.12.08 JF

CAUTION: Read and follow all safety rules and operating instructions before first use

of this product.

MISE EN GARDE : Veuillez lire attentivement les consignes de sécurité et les directives

d'utilisation avant l'utilisation initiale de ce produit.

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE: If the unit changes

ownership, be sure the manual accompanies this unit.

CONSERVER CES INSTRUCTIONS POUR CONSULTATION ULTÉRIEUR: En cas

de revente l’appareil, ce manuel doit être inclus avec l’appareil.

UNIT SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

PART IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

IMPORTANT SAFETY INFORMATION

Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Energy Saving Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Window Kit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

OPERATION

Features of the Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Air Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Dehumidifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Auto Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Remote Control Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

CARE AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

TABLE OF CONTENTS

Thank you for choosing a Danby appliance to provide you and your family with all of

the “Home Comfort” requirements of your home, cottage, or office. This Owner’s Use

and Care Guide will provide you with valuable information necessary for the proper

care and maintenance of your new appliance. If properly maintained, your Danby

appliance will give you many years of trouble free operation. Please take a few

moments to read the instructions thoroughly and familiarize yourself with all of the

operational aspects of this appliance.

Your Danby Portable Air-Conditioner is a multi-functional room air-exchanging,

air-processing appliance, designed to offer you the functions of; Air Conditioning,

Dehumidifying, and Independent Fan. Each individual mode is featured with

“oscillating” air swing capabilities. This unit can be conveniently moved from room to

room within your home and set up in just minutes. Imagine the convenience of 4

Season Home Comfort at your fingertips, anywhere, anytime.

For easy reference, may we suggest you attach a copy of your sales slip/receipt to this

page, along with the following information, located on the manufacturers nameplate on

the rear panel of the unit.

Model Number:

Serial Number:

Date of Purchase:

This information will be necessary if your unit requires servicing and/or for

general inquiries. To contact a Customer Service Representative, call Danby TOLL

FREE: 1-800-26- (1-800-263-2629)

Unit Specifications

Model Number DPAC10099

Voltage/Frequency 115V-60Hz

Noise Level 53dB

Fan Speeds 3

Cooling Capacity 10000BTU

Refrigerant R410A

Unit Weight 38 kg

Dimensions (W) x (H) x (D) 50.8 cm x 91.5 cm x 41.8 cm

Remote Control Yes

Time of Day Clock No

Auto Timer Yes

NOTE: Continuing research results in steady improvement. Therefore, this information and

these specifications are subject to change without notice.

WELCOME

UNIT

SPECIFICATIONS

READ ALL SAFETY INFORMATION BEFORE USING

1) Check available power supply and resolve any

wiring problems BEFORE installation and

operation of this unit. All wiring must comply with

local and national electrical codes and be

installed by a qualified electrician. If you have

any questions regarding the following

instructions, contact a qualified electrician.

2) This appliance draws 7.8 nameplate amps

under Cooling Mode and may be used in any

properly wired, general purpose 15 amp

household grounded receptacle.

3) For your safety and protection, this unit is

grounded through the power cord plug when

plugged into a matching wall outlet. If you are not

sure whether the wall outlets in your home are

properly grounded, please consult a qualified

electrician.

WARNING: Improper connection of the

grounding plug can result in risk of Fire, Electric

Shock, and/or injury to Persons associated with

the appliance. Check with a qualified service

representative if in doubt that the appliance is

proplery grounded.

4) DO NOT USE PLUG ADAPTERS OR

EXTENSION CORDS WITH THIS UNIT. If it is

necessary to use an extension cord with this unit,

use an approved “air conditioner” extension cord

only (available at most local hardware stores).

5) To avoid the possibility of personal injury,

always disconnect the power supply to the unit

before installing and/or servicing.

TABLE 1

Suggested Individual Branch Circuit

Nameplate Amps *AWG Wire Size

9.5 16

AWG- American Wire Gauge

*Based on copper wire at 60°C temperature rating.

TABLE 2

Receptacle and Fuse Types

Rated Volts 125

Amps 13

Wall Outlet

Fuse Size 15

Time Delay Fuse Plug Type

(or Circuit Breaker)

Air Exhaust: For air to be cooled and

filtered. Opens / Closes automatically.

LCD

Display

Front

Panel

Handles

Wheels

Air Filter

Air inlet

Air outlet

Cover

Electricity cable Water drain

Air inlet

PART IDENTIFICATION

IMPORTANT SAFETY INFORMATION

ELECTRICAL

SPECIFICATIONS

CAUTION: Do not leave this unit

unattended in a space where people or

animals cannot react to a failed unit are

located. A failed unit can cause extreme

overheating or death in such an

enclosed, unattended space.

The power cord supplied with this air conditioner contains a device that

senses damage to the power cord. To test if your power cord is working

properly, you must do the following:

Your Danby appliance is designed to be highly efficient in energy

savings. Follow these recommendations for greater efficiency.

1) Select a thermostat setting that suits your

comfort needs and leave at that chosen

setting.

2) The air filter is very efficient in removing

airborne particles. Keep the air filter clean at all

times.

3) Use drapes, curtains or shades to keep

direct sunlight from penetrating and heating

room, but do not allow drapes or curtains to

obstruct the air flow around the unit.

4) Start your air conditioner before the

outdoor air becomes hot and uncomfortable,

to avoid an initial period of discomfort while

the unit is cooling off the room. Use of the

automatic start/stop programmable TIMER

feature can be a major asset in this regard if

utilized to the fullest extent.

5) When outdoor temperatures are cool

enough, turn the air conditioner off and use

the FAN MODE. This circulates indoor air,

providing some cooling comfort while utilizing

less electricity.

NOTE: The power cord supplied with this air

conditioner contains a current leakage

detection device designed to reduce the risk of

fire. In the event the power supply cord is

damaged, it cannot be repaired and must be

replaced with a new cord from the product

manufacturer.

• Under no circumstances should this device be

used to turn the unit on or off.

• The “RESET” button must always be pushed

in (engaged) for correct operation.

• The power supply cord must be replaced if it

fails to reset when the “TEST” button is pushed

in.

1) Connect the power supply cord to an

electrical outlet.

2) The power supply cord has two buttons

located on the head of the plug. One button

is marked “TEST”, and the other is marked

“RESET”. Press the “TEST” button; you will

hear a click as the “RESET” button pops out.

3) Press the “RESET” button; you will hear a

click as the button engages.

4) The power supply cord is now energized

and supplying electricity to the air conditioner

(on some products this is also indicated by a

light on the plug head).

IMPORTANT SAFETY INFORMATION

POWER SUPPLY

CORD

ENERGY-SAVING

TIPS

Air Conditioning Mode ONLY

Your window kit has been designed to fit most standard “vertical”/”horizontal” windows up to a

maximum height of 80” (203cm). For vertical window applications, multi lock positions are

provided on the edge of each slider section to secure each sliding section together.

1) Select a suitable location, making sure you have access to an electrical outlet.

2) Install the flexible hose to the rear side of the unit. Insert the hose collar on top of the

exhaust opening and twist to lock into position.

3) Install the adjustable Window Slider Kit as required (see Fig. 4a & 4b).

4) Install the opposite end of the flexible exhaust hose into the window exhaust adapter.

5) Install the window exhaust adapter into the opening in the slider section, making sure the

window slider sections are secure.

6) Plug the unit into a 115V/60Hz grounded electrical outlet.

Window Slider Kit:

Min.: 28 1/3” (67.5cm)

Max.: 80” (203cm)

Window Slider Kit:

Min.: 28 1/3” (72cm)

Max.: 80” (203cm)

Horizontal Window

Vertical

Window

INSTALLATION

WINDOW KIT

INSTALLATION

Fig. 1INSTALLATION ACCESSORIES

Flexible Exhaust Hose

Exhaust Nozzle

Connector

Fixture

Adjustable Window Slider Kit:

28 1/3” (72cm)- 80” (203cm)

ELECTRIC SHOCK HAZARD: To avoid the possibility

of personal injury, disconnect power to the unit before

installing or servicing.

Caution: To avoid installation/operation difficulties, read

these instructions thoroughly.

Flexible Exhaust Hose (13cm) & Exhaust nozzle con-

nector (2 pcs)... from 17 7/10 (45cm) to 53 1/6” (135cm)

Flexible Exhaust Hose (11cm) & Exhaust nozzle

connector (2pcs)...from 15 3/4” (40cm) to 51 1/5” (130cm)

Adjustable window door slider kit (3 pcs)... from 28

1/3”(72cm) to 80” (203cm)

Fixture..... (2 pcs) & Screws..... (8 pcs)

NOTE: The exhaust/window kit must be installed at all

times when the unit is operating under AIR

CONDITIONING mode. There should be at least 11.8”

(30cm) clearance between the unit and any other objects

or building structures, and should be installed on a level

surface.

INSTALLATION

Screws

Water hose (79”/ 200cm)

Back of window panel

Tube Adapters

Fig. 2

Instructions for Assembling the Window Adapter

Kit- Fig. 2

1) Insert tube adapters through the back of the window panel.

2) Secure each tube adapter with four screws through the front

of the window panel.

3) Insert window panel extensions into window panel. Lightly

tighten the screws in the window panel to hold the extensions

in place.

Fig 3a Fig 3b

Warning Light Receiving Sensor

KEY PAD FUNCTIONS

POWER SWITCH:Turns unit ON/OFF

MODE: Allows you to scroll through and

select desired operating mode.

FAN: Select from three different fan

settings; High, Medium, and Low.

AUTO-TIMER

AUTO-TIMER Adjust:

Auto turn off- With machine in running mode,

press timer button to set timer control. Press

buttons to select number of hours you

would like the unit to run before it automatically

shuts off.

Auto turn on- With machine in stand by mode,

press timer button to set timer control. Press

buttons to select number of hours before

the unit automatically starts running in air

conditionning mode.

NOTE: The time is adjustable between 1-24

hours.

TEMPERATURE Adjust:

• Used for adjusting the thermostat.

• The default display is room temperature.

• In cooling mode, when button is

pressed, the set temperature is displayed and

may be adjusted. After 15 seconds the display

will revert back to room temperature.

Temperature is only adjustable in cool mode.

Warning Light

Condensed water may accumulate in the

unit. If the internal tank becomes full, the

Warning signal in the LCD Display will light

up and the unit will not operate until it has

been drained.

NOTE: By pressing both

buttons at the same time for more than

3 seconds, the display will toggle

between Celsius and Fahrenheit.

LCD Display

Cooling Mode

Dehumidify Mode

Fan Only Mode

High Fan Speed

Medium Fan Speed

Low Fan Speed

Display Set Temperature

Display Timer Setting of Auto

Switch ON / OFF

Warning Light (the machine will

stop running)

OPERATION- Features of the Control Panel

IMPORTANT: The exhaust hose must be properly vented (outdoors)

during air conditioning mode.

1) Press the POWER SWITCH key (Fig. A) to switch on the unit,

and the previous set temperature will be shown in the

temperature display area of the control panel.

2) Press the MODE key (Fig. B) until the COOL indicator light

illuminates on the control panel (Fig.C). Each depression of the

MODE key will advance to a different mode setting (Cool-

Dehumidifier-Fan)

3) Press the appropriate increase or decrease buttons

(Fig. D1 & D2) to select a suitable operating temperature setting.

Temperature settings are adjustable between 16°C (61°F) to 32°C

(89°F).

4) Press the FAN key (Fig. E) to select the desired fan speed

setting (Auto-High-Med.-Low). Your selection will appear on the

control panel (each depression of the fan key will advance to a

different setting).

• Cooling stops automatically when the set temperature is

achieved. Cooling resumes when the room temp. rises above the

“set” temperature level.

Fig. A

Fig. B

Fig. C

Fig. E Fig. F

OPERATING INSTRUCTIONS

AIR-CONDITIONING

Fig. D1 Fig. D2

NOTE: During Fan Mode, the exhaust hose does not have to be vented

outdoors.

1) Press the ON/OFF key pad to switch the unit on (Fig. H).

2) Press the MODE key (Fig. H) until the FAN indicator illuminates on the control panel (Fig.

J). Each press of the MODE key will advance to a different mode setting (Cool-Dehumidifier-

Fan).

3) Press the FAN Key (Fig. K) to select the desired FAN SPEED setting. Your selection will

appear on the control panel. Each press of the fan key will advance to a different fan speed

(High- Med- Low) as shown in Fig. L.

Fig. J Fig. K Fig. L

Fig. I

OPERATING INSTRUCTIONS (cont’d)

FAN

Note: During dehumidifier mode, the exhaust hose does not have to

be vented outdoors.

1) Press the ON/OFF key pad to switch the unit

on (Fig. A)

2) Press the MODE key (Fig. B) until the DRY

indicator illuminates on the control panel (Fig.

G).Each press of the MODE key will advance to

a different mode setting (Cool-Dehumidifier-Fan).

DEHUMIDIFIER

Fig. G

IMPORTANT: The drain

hose must be installed

during dehumidifier mode.

Drain Hose (79” / 200cm)

3) If room temperature is 25°C (77°F), fan speed can be adjusted. Press the Fan key (Fig. E)

to select the desired FAN SPEED setting. Your selection will appear on the contol panel. Each

depression of the fan key will advance to a different fan speed (High- Med.- Low) as shown in

Fig. F. Otherwise, fan speed is fixed to “low”.

Note: The warm air exchange hoses must vent inside the room when using Dehumidify Mode,

not outside as it does when cooling.

Fig. H

The AUTO-TIMER feature offers a unique selection of multiple choice, fully

automatic on and/or off (start/stop) programs between 1-24 hours under

any one mode of your Home Comfort unit.

The programs are as follows:

a) Auto-Off: Pre-select a time that will turn off the unit automatically (between 1-12hrs).

b) Auto-On: Pre-select a time that will turn on the unit automatically (between 1-12hrs).

c) Auto-On & Auto Off: Pre-select a time that will turn the unit ON / OFF automatically at

specified times (between 1-12hrs).

Note: These functions must be performed daily, as the program is automatically

canceled/erased after the program has ended.

Control Buttons:

1) Power Switch

2) Mode

3) Fan Speed

4) On / Off Timer

5) Time / Temperature Set

• Used for adjusting the timer and temperature.

• The default display on control panel is room temperature.

To operate the hand held remote control you will require

two “AAA” Alkaline batteries (included).

Batteries should be replaced when:

a) No signal (beep) is heard when attempting to program the main unit.

b) The main unit does not respond to a command issued by the remote control.

Battery replacement:

1) Slide the rear cover on the remote in the direction of the arrow. Continue pulling (gently)

until the cover separates completely from the unit.

2) Insert (2) batteries (AAA) following the same orientation (polarity) depicted inside the battery

chamber (+ / -).

3) Re-install rear cover.

4) If the remote control will not be used for extended periods of time (vacations, etc.),

batteries should be removed.

The remote operates within a range of 8 meters (26 ft.) from the receiver located inside the

main unit. Any obstruction between the receiver and remote may cause signal interference,

limiting the ability to program the unit.

Notes:

1) Do not drop the remote control.

2) Do not place the remote control in a location exposed to direct sunlight.

3) The remote control should be placed about 1 meter or more away from TV, or any

electrical appliances.

This Class B digital apparatus complies with canadian ICES-003.

OPERATING INSTRUCTIONS (cont’d)

AUTO-TIMER

REMOTE

CONTROL FEATURES

• When or key is pressed in cool mode, the set

temperature is displayed and may be adjusted. After 10

seconds, the display will revert back to room temperature.

• Timer setting is available from 1-24 hours by pressing the

key or

This manual suits for next models

Table of contents

Languages:

Other Danby Air Conditioner manuals

Danby

Danby DPA053B4WDB-RF User manual

Danby

Danby DPA120DBAUGDB User manual

Danby

Danby DPA120B8WDB-6 User manual

Danby

Danby DPA080E2WDB-6 User manual

Danby

Danby DAC 8009EE Assembly instructions

Danby

Danby DPAC8KDB Assembly instructions

Danby

Danby DPA120UB1WDB Assembly instructions

Danby

Danby DAC145EB6WDB-6 User manual

Danby

Danby DPA120B1WB Assembly instructions

Danby

Danby DPA060C2WDB Assembly instructions

Danby

Danby DPA100D1MDD User manual

Danby

Danby DPA060BAUWDB User manual

Danby

Danby ArcticAire AAC5040 User manual

Danby

Danby DAC080B5WDB-RF User manual

Danby

Danby DPAC9008 User manual

Danby

Danby DPA060BACBDB Assembly instructions

Danby

Danby DAC5277EE User manual

Danby

Danby Designer DPAC10061 User manual

Danby

Danby Premiere DPAC12010H Assembly instructions

Danby

Danby DAC100ECB4GDB Assembly instructions

Danby

Danby DPTA090HEB1WDB User manual

Danby

Danby DPAC10071 User manual

Danby

Danby Designer DPA100A1GD Assembly instructions

Danby

Danby DPA120B3WDB Assembly instructions

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual