D-Link DWL-P100 User manual

DWL-P100

Power-Over-Ethernet Adapters

Manual

- -

Introduction

About Power Over Ethernet (POE)

The DWL-P100 Power Over Ethernet (POE) Adapters are design to supply

operational power to a Wireless Access Point. These Power Over Ethernet

Adapters give users the ability to mount an Access Point virtually anywhere

in a building no matter where the power outlet is located such as ceilings,

attics, or roofs. It eliminates the need to use an AC-DC power supply at the

Access Point making the setup more convenient. D-Link’s DWL-P100 Power

Over Ethernet Adapters take advantage of the unused cable pairs within

Ethernet Cat 5 cabling. The Base Unit inserts DC voltage into the unused

wires therefore allowing the single Category 5 cable to carry both Ethernet

data and DC power to an Access Point. The POE Terminal Unit splits the data

and DC power apart, which is then supplied to theAccess Point.

- -

Contents of Package

(1) (2)

(6)

1. D-Link Power Over Ethernet / Base Unit

2. D-Link Power Over Ethernet / Terminal Unit

3. AC/DC power Adapter

4. Ethernet Cable

5. Quick Installation Guide

6. DC Power cable

- -

The D-Link DWL-P100

The DWL-P100 includes two modules:

•Power Over Ethernet / Base Unit

•Power Over Ethernet / Terminal Unit

The Base Power Over Ethernet module plugs into the wall AC outlet and also

connects to the wired hub. This will supply both low-voltage DC power and

data over the existing Category 5 cabling. The Terminal Power Over

Ethernet module separates the DC power and data, and connects conveniently

to the Wireless Access Point.

Features

Provides DC power over existing Category 5 cabling toAccess Points

Transforms incoming AC power into low-voltage DC power

Base and Terminal Power Over Ethernet modules powers any Wireless

Access Point requiring 5V/1A DC input

Protects Access Point from possible damages due to power-surges

- -

Connection Architecture

- -

Specifications

Category 5 pin power usages: 4/5 , 7/8

Output Voltage 5VDC/1A (Terminal side)

Ethernet Connector: RJ-45

Ethernet Data Rate: 10/100 Mbps

Number of AP’s it can power: 1

Ethernet Data Cable: TIA/EIA-568, Category 5 Cable

Device Weight (pair): 0.269 lbs

Dimensions: 3.15in x 1.73in

Hardware Installation

1. Connect the cable from the PC/Hub/Switch to the Base Unit “LAN IN”

2. Connect the Power Adapter to the Base Unit “DC 15V IN.” The green

PWR LED on the Base Unit should light up.

3. Connect the cable from the Base Unit “LAN OUT” to the “LAN IN” of

the Terminal Unit. (max cable length up to 328ft/100m, as defined by

IEEE 802.3)

4. Connect an Ethernet cable from the Terminal Unit “LAN OUT” to the

LAN port of the Wireless Access Point (AP).

5. Connect the “DC 5V OUT” from the Terminal Unit to the DC 5V input

port of the AP using the power cable provided. The green PWR LED of

the Terminal Unit should light up.

6. Operate the Wireless Access Point normally.

- -

Contacting Technical Support

You can find software updates and user documentation on the D-Link

website.

D-Link provides free technical support for customers within the United

States and within Canada for the duration of the warranty period on

this product.

U.S. and Canadian customers can contact D-Link technical support

through our

Web site, or by phone.

Tech Support for customers within the United States:

D-Link Technical Support over the Telephone:

(877) 453-5465

Monday through Friday 7:00am to 12:00am.

D-Link Technical Support over the Internet:

http://support.dlink.com

email:[email protected]

Tech Support for customers within Canada:

D-Link Technical Support over the Telephone:

(800) 361-5265

- -

Monday to Friday 8:30am to 9:00pm EST

D-Link Technical Support over the Internet:

http://support.dlink.ca

email:[email protected]

When contacting technical support, please provide the following

information:

· Serial number of the unit

· Model number or product name

· Software type and version number

Building Networks for People

020205

Other manuals for DWL-P100

Table of contents

Other D-Link Adapter manuals

D-Link

D-Link AirPlus DWL-650+ User manual

D-Link

D-Link AirPremier AG DWL-AG660 User manual

D-Link

D-Link DWA-171 User manual

D-Link

D-Link DBT-122 User manual

D-Link

D-Link DGE-560SX User manual

D-Link

D-Link DWM-156 User manual

D-Link

D-Link DWL-G820 - AirPlus Xtreme G User manual

D-Link

D-Link DUB-E100 User manual

D-Link

D-Link DFE-530TX User manual

D-Link

D-Link DWM-152 User manual

D-Link

D-Link DWA-120 User manual

D-Link

D-Link DHP-501AV User manual

D-Link

D-Link DWA-131 User manual

D-Link

D-Link mydlink DSP-W110 User manual

D-Link

D-Link DWA-171 User manual

D-Link

D-Link DWL-G820 - AirPlus Xtreme G User manual

D-Link

D-Link DHP-700AV User manual

D-Link

D-Link DWA-192 User manual

D-Link

D-Link DVG-7111S User manual

D-Link

D-Link DGE-530T User manual

D-Link

D-Link DHP-312 User manual

D-Link

D-Link DWA-121 User manual

D-Link

D-Link DGL-4300 - GamerLounge Wireless 108G Gaming... User manual

D-Link

D-Link DWL-P200 User manual

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide

RCA

RCA AH57R manual