Cornelius P/N 629087914 User manual

ED/DF 175 ‘’K’’ Style Lid Kit Installtion Instructions

INSTALLATION INSTRUCTIONS

ED/DF 175 “K” STYLE LID KITS, P/N 629087914 AND 629087915

These “K” style kits apply to the following ice makers:

WARNING:

Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the

user. Verify that all the power is off to the unit before performing any work.

Failure to comply could result in serious injury, death or damage to the equipment.

WARNING:

All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or

the equipment manufacturer’s instructions.

Failure to comply could result in serious injury, death or damage to the equipment.

WARNING:

All of the attachment screws and plates must be installed as directed in this manual.

Failure to comply could result in serious injury, death or damage to the equipment.

Perform the following procedure to install the adapter kit.

1. Unpack and inspect the kit.

2. Insert baffle assembly into the adapter lid.

3. Place (2) sealing washers (item 9) over studs and (2) flat washers (item 11), then fasten in place with (2)

plastic acorn nuts (item 8).

Table 1. Applicable Models

Ice Maker Width

Cornelius “I” Series 322, 522 22”

Table 2. Loose Shipped Parts

Item No. Part No. Name Qty.

1620043511

620043512

Cover, Gray (629087914)

Cover, Black – (629087915)

2 620046011 Lid Assembly 1

3 22127 Bracket 2

4 70217 #8 Screw 12

5 50904 RTV 1

6 90221 Label 1

7 620919511 Installation Instruction 1

8 620701902 Acorn Nut, 8-32 Nylon 2

9 620701901 Sealing Washer 1

10 620042928 Baffle Ice ED150 Adapter Lid 1

11 621701903 #8 Nylon Washer 2

12 630000408 Thermostat Kit 1

Revision Date: July 22, 2011 www.cornelius.com Revision: E

ED/DF 175 ‘’K’’ Style Lid Kit Installtion Instructions

4. Set ice maker lid on the top of the dispenser.

5. Using the slotted holes in the lid as a template, drill four (4) 0.140” diameter (9/64”) holes at the bottom of

the slots (see detail A). Use extreme care not to drill into the hopper. Fasten the lid to the dispenser with

four (4) #8 sheet metal screws, two on each side.

6. Seal the ice maker to the top of the dispenser as follows:

A. Run beads of RTV around the opening in the lid and inside of the perimeter of the ice maker outline so

that the ice maker sets on the RTV.

B. Set the ice maker onto the lid and position it as required

C. Wipe away the excess RTV.

7. Drill 9/64” diameter holes into the ice maker cabinet using the bracket as a template. Use extreme care not to

drill into any ice maker components (condenser, tubing, etc.). Secure the brackets using the screws provided.

8. Follow the ice maker manufacturers instruction to complete the installation of the ice maker including the bin

thermostat if so equipped or required.If the plastic acorn nuts interfere with the positioning of the plastic man-

ual fill cover, it may be necessary to make small notches in the back flange of the cover to clear the acorn nuts.

NOTE: Bin thermostat must not interfere with the agitator rotation.

Figure 1. ED/DF 175

ED/DF 175 ‘’K’’ Style Lid Kit Installtion Instructions

Figure 2.

This manual suits for next models

Table of contents

Other Cornelius Ice Maker manuals

Cornelius

Cornelius Ice Cube Maker JEACS50SL1 User manual

Cornelius

Cornelius "I" Series 227 User manual

Cornelius

Cornelius CHD22 Manual

Cornelius

Cornelius WM600 User manual

Cornelius

Cornelius WM600 Operating instructions

Cornelius

Cornelius Series 200 User manual

Cornelius

Cornelius 1400 Series User manual

Cornelius

Cornelius XTREME 631805001 Setup guide

Cornelius

Cornelius Nordic CCM1448 Guide

Cornelius

Cornelius I Series 224 User manual

Cornelius

Cornelius Enduro-300 IntelliCarb User manual

Cornelius

Cornelius IMD Series User manual

Cornelius

Cornelius The Profile PR150 BC User manual

Cornelius

Cornelius EVAPORATOR CONVERSION KIT WCC700 User manual

Cornelius

Cornelius IMD300-30 Setup guide

Cornelius

Cornelius WCC 2001 QT-R User manual

Cornelius

Cornelius Enduro 200 User manual

Cornelius

Cornelius ED250 PRO GATE Technical specifications

Cornelius

Cornelius 1000-Series User manual

Cornelius

Cornelius Nordic CCM0830 1 Guide

Cornelius

Cornelius D-45 User manual

Cornelius

Cornelius Nordic CCM1530 User manual

Cornelius

Cornelius IMD Series User manual

Cornelius

Cornelius 2267 User manual

Popular Ice Maker manuals by other brands

Hoshizaki

Hoshizaki KMD-460MWJ instruction manual

Sub-Zero

Sub-Zero 315I Planning information

Unold

Unold 48945 Instructions for use

Kenmore

Kenmore 2217402A Use & care guide

GE XPIO43SCSS owner's manual

Hoshizaki

Hoshizaki KMD-901MAH Specifications

Whynter

Whynter FIM-450HA instruction manual

U-Line

U-Line UMCR014-SC01A User guide & service manual

Andrew James

Andrew James AJ000522 manual

Scotsman

Scotsman CME1356 user guide

Scotsman

Scotsman ACM 25 Service manual

Kärcher

Kärcher IP 120 manual

U-Line

U-Line SS1095 Quick referenc guide

Maytag

Maytag MIM1554WRS - Ice Maker User instructions

Hoshizaki

Hoshizaki KM-630MAH instruction manual

Princess

Princess Yonanas user manual

Unold

Unold 48946 Instructions for use

Electrolux

Electrolux E15IM60GP Factory parts catalog