Cisco 7962 User manual
1
Cisco IP Phone 7962
User Guide
UNIVERSITY OF WINNIPEG
515 Portage Ave,
Winnipeg
February 2011
Cisco IP Phone 7962 User Guide
2
Phone Model
Cisco IP Phone 7962 User Guide
3
Cisco IP Phone 7962 User Guide
4
Cisco IP Phone 7962 User Guide
5
Call Operations
Answering Calls
To answer a call
Lift handset or press Speaker button (if enabled)
To answer a 2nd incoming call on that same line,
press Answer softkey (first call is automatically
put on hold).
To toggle between callers, use Navigation button
to select Resume or Hold softkeys.
Placing Calls
To place a call
Lift handset and dial number OR
To place new call when you already have active
call, press Hold softkey then New Call. Use
Navigation key to select Resume and Hold
softkeys to toggle between the calls.
Dial 4digits for internal calls
Dial 8+ number for external calls
Dial 8 1+ Long Distance number
Redial
To redial last number called
Hold
Press Redial softkey
To put callers on hold or resume calls
Press Hold softkey OR
Press Resume softkey to re-establish call
Cisco IP Phone 7962 User Guide
6
Transfer
To send call to another number
With a caller is on the line:
Press Transfer softkey
Enter the destination extension number
You can speak privately before completing the
transfer (optional)
Press Transfer softkey to complete the transfer
or you may hang up
At a busy, no answer or misdial conditions:
Press line key to return to your call
Call Forward
To redirect incoming calls to another number
Press the CFwAll softkey
Enter the destination number OR
Press Messages button to forward to voice
message system
To cancel:
Press CFwAll softkey
Conference
To establish a conference call with up to 6
participants
With a caller on the line:
Press the More > Confrn softkey (caller is
placed on hold)
Enter participant’s extension number
Speak privately before joining the parties
Press Confrn softkey to join all parties
Repeat above steps to add additional parties
During the conference call, press the More >
ConfList softkey to view or remove participants. The
controller is indicated by *and has the ability to
remove participants on the call by selecting Remove
softkey.
Cisco IP Phone 7962 User Guide
7
Mute
To turn mute ON and OFF
While on call, press Mute button
Mute LED turns solid red.
To turn OFF:
Press Mute button again
iDivert
To send or redirect calls to voice message system
At the ringing phone:
Press iDivert softkey
DND (Do Not Disturb)
To turn off the ringer on your phone for incoming calls.
When phone is on hook:
Press DND softkey to turn rigner off
To turn DND OFF:
Press DND softkey again
Directory
Directories button maintains a log of your missed,
placed and received calls as well as personal and
corporate directory that you can dial from.
Press Directories button
1. Missed Calls
2. Received Calls
3. Placed Calls
4. Personal Directory
5. Corporate Directory
Cisco IP Phone 7962 User Guide
8
Searching for staff
member in Directory
To use personal and corporate directory and place
calls to coworkers
Press Directories button
Scroll down to Corporate Directory entry
Use keypad to enter either first or last name, or
extension number
Press Search softkey
Select Dial softkey to call number
y
o
u
r
Other manuals for 7962
8
Table of contents
Other Cisco IP Phone manuals
Cisco
Cisco C926 User manual
Cisco
Cisco 7975G - Unified IP Phone VoIP User manual
Cisco
Cisco 8841 User manual
Cisco
Cisco 7942 Setup guide
Cisco
Cisco 3911 User manual
Cisco
Cisco 7965 User manual
Cisco
Cisco 7821 User manual
Cisco
Cisco 7911 User manual
Cisco
Cisco DATAVOX 7941 User manual
Cisco
Cisco 8811 User manual
Cisco
Cisco 79 SERIES User manual
Cisco
Cisco SPA 501G User manual
Cisco
Cisco Small Business SPA525G2 User manual
Cisco
Cisco 524SG - Unified IP Phone VoIP User manual
Cisco
Cisco Cisco 525 Service manual
Cisco
Cisco 6800 Series User manual
Cisco
Cisco DATAVOX 7941 User instructions
Cisco
Cisco 7940 - IP Phone VoIP User manual
Cisco
Cisco 6901 Standard User manual
Cisco
Cisco Cisco Unified IP Phone 7960G User manual
