Cisco SPA3000 User manual

Set Up the SPA3000

Document ID: 108740

Contents

Introduction

How do you initially set up an SPA3000?

Related Information

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business

products (formerly Linksys Business Series).

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Q. How do you initially set up an SPA3000?

A. In setting up the SPA3000, make sure you have a one touch tone analog phone, your

NodePhone account details, and access to a standard phone port. You should also have these

package contents:

Phone Adapter Unit♦ Ethernet Cable Standard Phone Cable♦ A 5 Volt Power Adapter♦

Note: This guide has been prepared with firmware 2.0.13, the current supported firmware

release for NodePhone. If you are using an earlier firmware, the web configuration screen

might not look the same as the images in this document. Cisco recommends upgrading your

SPA3000 to version 2.0.13, which is available from the Cisco Download Center ( registered

customers only) .

In order to set up the SPA3000, complete these steps:

Ensure the SPA3000 Power Supply is Connected Properly1. Connect the SPA30002.

Ensuring the SPA3000 Power Supply is Connected Properly

Make sure the power adapter is plugged to an available power outlet.1.

After the plug is connected to the power adapter, connect the SPA3000. For

instructions, complete the next steps.

2.

Connecting the SPA3000

Connect the phone cable to the wall jack with ADSL service, and then connect the

other end to the LINE port of the gateway. Then, connect the Ethernet cable from the

SPA3000 to one of the Ethernet ports (1,2,3 or 4 ) of the Linksys gateway.

1.

Connect the phone cable to the wall jack with ADSL service, then connect the other

end to the line port of the ADSL line filter.

2.

Connect the ADSL modem line to the ADSL port of the ADSL router, and the local

phone line should be connected to the LINE port of the SPA3000.

3.

Connect the phone to the PHONE port on the SPA3000.4.

The PSTN phone line goes from the Local phone port of the Line Filter to the Line

port on the SPA3000. The Phone is connected to the Phone port of the SPA3000. The

Ethernet cable is connected between the ADSL router and the SPA3000.

5.

Related Information

Technical Support & Documentation − Cisco Systems•

Contacts & Feedback | Help | Site Map

© 2013 − 2014 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of

Cisco Systems, Inc.

Updated: Dec 12, 2008 Document ID: 108740

Table of contents

Other Cisco Gateway manuals

Cisco

Cisco Meraki Z3C User manual

Cisco

Cisco Network Device MGX 8240 User manual

Cisco

Cisco Expressway CE1200 User manual

Cisco

Cisco DPC2325 User manual

Cisco

Cisco DPQ3925 User manual

Cisco

Cisco VG400 series Manual

Cisco

Cisco ASR 9000 Series Installation manual

Cisco

Cisco DPC2434 User manual

Cisco

Cisco Small Business SPA8800 User manual

Cisco

Cisco VG30D User manual

Cisco

Cisco DPA 7610 Instruction Manual

Cisco

Cisco Linksys WAG200G User manual

Cisco

Cisco IP/VC 3526 How to use

Cisco

Cisco EPC3925 User manual

Cisco

Cisco Expressway CE500 User manual

Cisco

Cisco VG410 Manual

Cisco

Cisco RF 1 User manual

Cisco

Cisco ASR 5000 Series Instruction Manual

Cisco

Cisco Small Business SPA8000 Original operating instructions

Cisco

Cisco EPC2434 User manual

Cisco

Cisco AS5400HPX User manual

Cisco

Cisco TelePresence ISDN GW MSE 8321 User manual

Cisco

Cisco AS5400 Series User manual

Cisco

Cisco SPA122 ATA User manual

Popular Gateway manuals by other brands

LST

LST M500RFE-AS Specification sheet

Kinnex

Kinnex Media Gateway quick start guide

2N Telekomunikace

2N Telekomunikace 2N StarGate user manual

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE user guide

Telsey

Telsey CPVA 500 - SIP Technical manual

RTA

RTA 460A-NNA4 Product user guide

Shaw

Shaw Gateway HDPVR user manual

ABB

ABB VSN900 Commissioning manual

Commander

Commander Pulse owner's manual

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E manual

NETGEAR

NETGEAR C6300BD installation guide

Amit

Amit CDW531AM user guide

HMS

HMS Netbiter EasyConnect EC150 user manual

Huawei

Huawei EchoLife HG620 user guide

AT&T

AT&T U-verse 3801 Replacement self-installation guide

Logic IO

Logic IO RTCU MX2 turbo Technical manual

Suttle

Suttle MediaMAX MXM-521 installation instructions