CDVI CDV96KP User manual
English
User Manual
2-Wire Video Outdoor Station
1
4 5 6
98
0 #
7
2 3
*
1
4 5 6
98
0 #
7
2 3
*
CDV96/KP CDV96KP-SF
CDV-ENG-611(F)KP-V1 190307
Contents
1.Parts and Functions............................................................................................. 1
2.Terminal Descriptions .......................................................................................... 2
3.Mounting.............................................................................................................. 2
4.System Wiring and Connections ......................................................................... 4
5. Pan-tilt & Zoom................................................................................................... 8
6. Functions Setting Up .......................................................................................... 9
7.Unlock Operations............................................................................................... 17
8.Specications ...................................................................................................... 17
9.Cables Requirements.......................................................................................... 18
10.Precautions........................................................................................................ 19
-1-
1.Parts and Functions
Mounting box
30 mm
1
4 5 6
98
0 #
7
2 3
*
1
4 5 6
98
0 #
7
2 3
*
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
CDV96KP
Rain Cover
CDV96KP
[1] Camera lens
[2] Camera LED
[3] Speaker
[4] Touch keypad
[5] Keypad LED
[6] Call button
[7] Microphone
[8] Power LED
-2-
3. Mounting
1 2
43
2.Terminal Descriptions
1 2 3
Lock Control Jumper
L1
PL
S1+ GND
Main Connect Port
L2
•Lock Control Jumper: To select the
lock type.
•S1+,GND: Lock power connection
port.
•
• L1,L2: Bus line connection,
no polarity.
Main Connect Port: For connection
of the bus line and the electronic locks.
•PL: External lock power input
CDV96KP Mounting
Drill holes in the wall to match the size of
screws and attach the rain cover to the wall.
Connect the wiring (see pg 4)
Attach the panel to the rain cover Using ascrewdriver secure
the panel
-3-
1 2
43
Attach the panel to the mounting box and
use screws supplied to fix the panel
Placing Name Label
CDV96KP-SF Mounting
Make a hole in the wall to match the size of
the mounting box and fix to the wall.
Connect the wiring (see pg 4.)
Use a screwdriver to remove the screw holding the panel in place. Slide out the name label as shown.
-4-
Basic Connection
4.System Wiring and Connections
BUS(IM) BUS(DS)
PC6A
AC~
-
+
L1 L2 PL S1+ GND
Doorbell Button
Switch
Code=00, DIP6=on
12 3 4 5 6
ON DIP
L2
L1
DIP Switches
Electric Lock Connection
EB
*
LOCK
L1 L2 PL S1+ GND
Jumper position in 2-3
1 2 3
Door Lock Controlled with Internal Power
Note:
2. The door lock is limited to 12V, and holding
current must be less than 250mA.
3. The door lock control is not timed from Exit
Button(EB).
4. The Unlock Mode Parameter of Monitor
must be set to 0 (by default).
1. This mode only supports Fail Secure (power
on to unlock) Strikes
-5-
LOCK
Take off the Jumper
POWER
SUPPLY
L1 L2 PL S1+ GND
Unlock parameter setting(set in monitor)
Door Lock Controlled with Dry Contact
Note:
4. Setup the Unlock Mode of Monitor for different
lock types.
00:10 DS-1
About
Local Address 00.00
Video Standard AUTO
System Verson 00.01.00
Display Driver 1.0
Font 1.0
UI 1.0
INSTALLER SETUP 123
_
? + OK: Help Menu
@ + OK: Address Setting Menu
1. An external power supply must be used according
to the lock power requirements.
2. The internal relay contact is restricted to AC or
DC 24V/1A.
3. The jumper must be removed before connecting.
•Power-on-to-unlock (Fail Secure) type:
Unlock Mode=0 (by default)
•Power-off-to-unlock (Fail Safe) type:
Unlock Mode=1
•When the About page shows, press UNLOCK button on front panel and hold for 2
seconds.
•On main menu page, touch [Logo] icon to enter About page.
•A QWERTY keypad is shown. Refer to the following:
Note:
1. The CDV96KP must be connected before setting.
2. A set parameter will be saved in CDV96KP automatically, it only needs to be set on one
monitor.
-6-
100~240VAC
DBC4A1
A B C D
OFF
ON
Impedance
switch
BUS(IM) BUS(DS)
PC6A
AC~
4# Camera
L1 L2 PL S1+ GND L1 L2 PL S1+ GND L1 L2 PL S1+ GND L1 L2 PL S1+ GND
(Device Address:3)
3# Camera
(Device Address:2)
2# Camera
(Device Address:1)
1# Camera
(Device Address:0)
Basic IN-OUT Wiring Mode
(Device Address:0)
BUS(IM) BUS(DS)
PC6A
AC~
100~240VAC
1
4 5 6
98
0 #
7
2 3
*
Code=0 MasterCode=00 Slave 2 Code= 00 Slave 1
Multi Door Stations Connection (4 max)
Multi Monitors Connection (4 Max*)
* IMPORTANT: Subject to cable type.
Please see cable distance chart on pg 18
or call CDVI Technical Support for more
information.
-7-
OFF ON
DBC4A1
A B C D
Impedance
switch
(Device Address:0)
100~240VAC
BUS(IM) BUS(DS)
PC6A
AC~
1
4 5 6
98
0 #
7
2 3
*
Code = 00
Master
Code=00
Slave 1
Code=00
Slave 2
Code=00
Slave 3
With DBC4A1 Wiring Mode (4 Max*)
* IMPORTANT: Subject to cable type.
Please see cable distance chart on pg 18
or call CDVI Technical Support for more
information.
-8-
5. Pan-tilt & Zoom
Touch icon to zoom the center position.
Screen of monitor
Note: this function requires a monitor with sh-eye function to support i.e.CDV47DX or CDV47MG
When an image at a door station is displayed,move
to the desired position by touching
on the screen to view the image in zoom mode.
If greater detail about visitors is required,move to the desired position by touching on
the screen to view the image in pantilt & zoom mode.
Note: The edge of pan & tilt image will not be displayed.
Here is an example:
Other manuals for CDV96KP
1
This manual suits for next models
1
Table of contents
Other CDVI Intercom System manuals
CDVI
CDVI CDV4796KP-DX User manual
CDVI
CDVI CD97-4ID User manual
CDVI
CDVI 2EASY CDV-T5 User manual
CDVI
CDVI CDV97-8ID Series User manual
CDVI
CDVI 2EASY CDV-96KP User manual
CDVI
CDVI CDV-91 User manual
CDVI
CDVI CDV91S User manual
CDVI
CDVI 2EASY CDV-850IP User manual
CDVI
CDVI 2Easy CDV4796KP-DX User manual
CDVI
CDVI CDV-4791S-DXB User manual
