Canon imageCLASS D530 Safety guide
Starter Guide
Read this guide first.
Read this guide first.
Please read this guide before operating this product. The remarks for important safety instructions are described in the Basic
Please read this guide before operating this product. The remarks for important safety instructions are described in the Basic
Operation Guide. After you finish reading the Starter Guide, store it in a safe place for future reference.
Operation Guide. After you finish reading the Starter Guide, store it in a safe place for future reference.
Connecting to a Computer
Connecting to a Computer
and Installing the Drivers
and Installing the Drivers
P.12
Preface
Preface
P.2
1
Installing the Machine
Installing the Machine
P.4
2
3
2
Checking the Supplied Accessories
Confirm that all the supplied accessories are contained in the box. If an item is missing or damaged, please contact the Canon
Authorized Service Facilities or the Canon Customer Care Center.
About the USB Cable
The machine does not come with a USB cable. Have a USB
cable ready as needed.
Supplied Toner Cartridge
• The included "Canon Cartridge 128 Starter" can print an
average yield of 1,000 sheets*. The average yield of the
replacement toner cartridge differs from the supplied toner
cartridge.
• To purchase replacement toner cartridges:
"Replacement Toner Cartridges" in the e-Manual
* The average yield is based on "ISO/IEC 19752" when printing A4
size paper with the default printing density.
User Software CD-ROM
The User Software CD-ROM contains the MF Drivers, MF
Toolbox, various software, and the e-Manual.*
MF Drivers
The MF Driver contains the printer and scanner drivers.
MF Toolbox
The MF Toolbox provides a group of commands for you,
such as to open a scanned image in an application, send it
as an e-mail attachment file, and store it on the hard disk.
Miscellaneous Software
The User Software CD-ROM contains Presto! PageManager.
Install it from the [Custom Installation] option.
* See "Using the e-Manual" (P.18).
Starter Guide
Sta
Basic Operation Guide
Power Cord
User Software CD-ROM
Limited Warranty Notice
Machine Unit
Registration Card
The toner cartridge is already installed.
3
Checking the Supplied Accessories
Preface Installing the Machine
2
Connecting to a Computer and Installing the Drivers
31
Included Documents
Printed Manuals
Sta
This manual
Starter Guide
This manual describes the configuration and software installation.
Basic Operation Guide
This manual describes the basic use of the machine.
Manuals Included in the CD-ROM
e-Manual
This manual explains all the features of the
machine, and is categorized by subject. For
details about using the e-Manual, see “Using the
e-Manual” (P.18).
4
5
Removing the Packing Materials
Remove all the packing materials, such as orange tape. Packing materials may change in form or placement, or may be added or
removed without prior notice.
Proper Handling
Hold here.
Hold here.
Check!
Are all the packing materials removed?
Tape Packing Material
with tape
12
5
Removing the Packing Materials
34
Do not remove this
packing material yet.
Establishing an Installation Site
= 4" (100 mm)
D560
35 5/8" (904 mm)
24 5/8" (626 mm)
27 3/4" (706 mm)
★
★
★
★
★
1
23
D530
35 5/8" (904 mm)
23 1/4" (590 mm)
27 3/4" (703 mm)
★
★
★
★
★
1
2 3
Do not place the machine near the following:
• Alcohol, paint thinner, or other flammable substances ▶If flammable substances come into contact with electrical
parts inside the machine, this may result in a fire or electrical shock.
• Any medical equipment ▶Radio wave emitted from this machine may interfere with medical equipment.
• Surfaces that are unstable, subject to excessive vibration, objects that could block the ventilation slot, dampness
or dust, in direct sunlight or exposed to the elements, subject to high temperatures, open flames, and poor
ventilation ▶Installing the machine in locations with these characteristics may result in personal injury, fire, or
electric shock.
Ozone from the Unit
Although ozone is generated from the machine during operation, it does not have any affect on the human body.
However, if you intend to use the machine for long periods of time, ensure that the installation location is well
ventilated for a comfortable working environment.
Preface Installing the Machine
2
Connecting to a Computer and Installing the Drivers
31
6
1
2
Protrusions
Left Side
Right Side
The plastic part
is also a packing
material. Be sure
to remove it.
2
1
The length of the tape is
approximately 20" (50 cm).
Fit the protrusions on each side of the toner cartridge,
and then slide the toner cartridge into the machine.
1
5
910
2
6
Protrusions
Preparing the Toner Cartridge
7
Preparing the Toner Cartridge
Shake 5 to 6 times.
1
2
Place on a flat surface.
11
3
7
4
8
Preface Installing the Machine
2
Connecting to a Computer and Installing the Drivers
31
Check!
Are all the packing materials removed?
Packing materials
Sealing Tape
Packing material
with a sheet
8
Loading Paper
Loading Paper Other than Letter Size
The procedure here is for loading Letter size paper. To load paper other than Letter size, such as Legal or
Statement, see “Loading Paper Other than Letter Size” (P.16) after finishing the initial settings.
Adjust the paper guides tightly to
the width and length of the paper.
Spread the paper guides a little wider
than the width and length of the paper.
12
45
9
Loading Paper
Preface Installing the Machine
2
Connecting to a Computer and Installing the Drivers
31
Use the paper stopper when printing.
Lift the paper stopper to prevent the paper from
falling out of the output tray.
Load Limit Guide
Push until the edge of the paper stack
meets the back of the paper cassette.
Check!
Make sure that the paper
stack does not exceed the
load limit guide.
3
10
Language
English
French
Portuguese
Spanish
Select Country/Region
United States (US)
Canada (CA)
Brazil (BR)
Mexico (MX)
• Press [◀] or [▶] to move the cursor to the left and
right.
• Press [▲] or [▼] to change the numeric value,
or AM/PM.
※The factory default settings for time display is set as 12-Hour.
Current Time Set.
01/01/2012 12:52 AM
(0:00-12:59)
Connecting the Power Cord
OFF
Do not connect the USB cable.
Connect the cable when installing the software.
Make sure
that the
machine is
turned OFF.
Press [▲] or [▼] to highlight a
language, and then press [OK].
Press [▲] or [▼] to highlight a
region, and then press [OK].
Enter the date and time, and then press [OK].
1
45
7
2
Other manuals for imageCLASS D530
2
This manual suits for next models
1
Table of contents
Other Canon Printer manuals
Canon
Canon MG5100 series User manual
Canon
Canon Pixma MG3550 Setup guide
Canon
Canon GX5070 Setup guide
Canon
Canon i960 Series Manual
Canon
Canon 3410 User manual
Canon
Canon PIXMA MX894 User manual
Canon
Canon PIXMA IP2500 Series User manual
Canon
Canon Pixma TS7520 Setup guide
Canon
Canon iPF8400S Series User guide
Canon
Canon imageCLASS LBP622Cdw User manual
Canon
Canon CX 350 User manual
Canon
Canon iP4000 - PIXMA Photo Printer Instruction Manual
Canon
Canon 1238P User manual
Canon
Canon i550 User manual
Canon
Canon NP-1215 User manual
Canon
Canon BJC6500 - BJC 6500 Color Inkjet Printer Quick reference guide
Canon
Canon MG5200 series User manual
Canon
Canon Colorado 1630 User manual
Canon
Canon LASER SHOT LBP-1210 User manual
Canon
Canon iP3300 - PIXMA Color Inkjet Printer User manual
