C.A. Technologies Techline JR User manual

ITEM NO. PART NO. DESCRIPTION ITEM NO. PART NO. DESCRIPTION Kit

1TJR Body Assembly 5 51-406 AluminumCup

260-TJR-30-XX Needle / Nozzle Set* 6 51-407 Plastic Cup

360-TJR-20 Air Cap 7 91-470 Cup and Collar

460-TJR-10-W Wrench & Brush Kit 8 91-471-50 Lids and Liners (50 Pack)

Repair Kit 60-TJR-10 Soft Seal Repair Kit 9 91-473 TJRPPS Adapter

TJR

TJR PPS

*See Needle & Nozzle Sets Chart

7 8 9

TJR

5 6

Available CAT Packs

- TJR

- TJR PPS

Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708

www.spraycat.com

Techline JR

GRAVITY FEED SPRAY GUN

PRODUCT INFORMATION

NEEDLES

PART NO. DESCRIPTION

60-TJR-30-08L 0.8 mmNeedle

60-TJR-30-12L 1.0 mm& 1.2 mmNeedle

60-TJR-30-14L 1.4 mmNeedle

NEEDLE & NOZZLE SETS

PART NO. DESCRIPTION

60-TJR-30-08 0.8 mmNeedle / Nozzle Set

60-TJR-30-10 1.0 mmNeedle / Nozzle Set**

60-TJR-30-12 1.2 mmNeedle / Nozzle Set**

60-TJR-30-14 1.4 mmNeedle / Nozzle Set**

* 1012 needle is used for both the 1.0 and 1.2 nozzle

** Included in standard TJR Kit

ITEM NO. PART NO. DESCRIPTION ITEM NO. PART NO. DESCRIPTION Kit

1TJR Body Assembly 7 51-406 AluminumCup

260-TJR-30-12 Needle / Nozzle Set* 8 51-407 Plastic Cup

360-TJR-20 Air Cap 9 91-470 Cup and Collar

4 60-TJR-21 Round Pattern Kit 10 91-471-50 Lids and Liners (50 Pack)

560-TJR-10-W Wrench & Brush Kit 11 91-473 TJRPPS Adapter

660-TJR-30-10-G Glaze Nozzle 1.0 Repair Kit 60-TJR-10

TJR

Glaze

TJR

Glaze PPS

Soft Seal Repair Kit

ITEM NO. PART NO. DESCRIPTION ITEM NO. PART NO. DESCRIPTION Kit

1TJR Body Assembly 6 51-406 AluminumCup

260-TJR-30-XX Needle / Nozzle Set* 7 51-407 Plastic Cup

360-TJR-20 Air Cap 8 91-470 Cup and Collar

4 60-TJR-21 Round Pattern Kit 9 91-471-50 Lids and Liners (50 Pack)

560-TJR-10-W Wrench & Brush Kit 10 91-473 TJRPPS Adapter

TJR

Deluxe

TJR

Deluxe

PPS

*See Needle & Nozzle Sets Chart (Soft Seal Repair Kit: 60-TJR-10)

TJR Deluxe

*No air needed when using Glaze Nozzle

*Uses1.2needlesuppliedin kit

*Inspired by Wayne Smith

89106 7

Available CAT Packs

- TJR Deluxe

- TJR Deluxe PPS

Available CAT Packs

- TJR Glaze

- TJR Glaze PPS

TJR Glaze

5 4

9117 8 10

Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708

www.spraycat.com

Techline JR Kits

GRAVITY FEED SPRAY GUN

PRODUCT INFORMATION

NEEDLE & NOZZLE SETS

PART NO. DESCRIPTION

60-TJR-30-10 1.0 mmNeedle / Nozzle Set

60-TJR-30-12 1.2 mmNeedle / Nozzle Set

* 1012 needle is used for both the 1.0 and 1.2 nozzle

NEEDLES

PART NO. DESCRIPTION

60-TJR-30-12L 1.0 mm& 1.2 mmNeedle

60-TJR-40-05 Round Pattern Kit Needle

NEEDLES

PART NO. DESCRIPTION

60-TJR-30-12L 1.2 mm& Glaze Needle

60-TJR-40-05 Round Pattern Kit Needle 1

ITEM NO. PART NO. DESCRIPTION ITEM NO. PART NO. DESCRIPTION

1See Page 1 & 2 Air Cap 7 60-TJR-15 Fluid Control Knob / Lock

2See Page 1 & 2 Nozzle 8 60-TJR-14 Air Valve

360-TJR-11 Atomizing Black Spacer 9 60-TJR-12 Fan Control Knob

4See Page 1 & 2 TJR Gravity Cup 10 60-TJR-18 Air Inlet Fitting

560-TJR-16 Fluid Inlet 11 60-TJR-13 Air Control Knob

6See Page 1 & 2 Needle * 60-TJR-10 Repair Kit

*Indicates partincludedinrepairkit 60-TJR-10

Item 3 (Atomizing Spacer)

Front

Facetowards

Air Cap and

Nozzle

Back

Facetowards

the TJR gun

body

Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708

www.spraycat.com

Revised4/28/15

Operating and Maintenance Instructions for the CAT TJR Spray Gun

Setting Up The TJR Spray Gun

The TJR operates best with10PSIat the gun (operating pressure)

The TJRuses 3.5cfm.

The Tjr is supplied with an air inlet fitting which is ¼” NPT male. You will need to hook up a suitable length of 5/16”

air hose fitted with a ¼” NPS(F) connection.

Connect the gravity feed cup to the gun by screwing the cup onto the spray gun fluid inlet.

Adjusting Your Spray Gun

There are twomeans of adjusting airat thegun.The pattern adjusting

valve andthe air adjusting valve.

PatternAdjusting Valve

The pattern-adjustingvalveregulates airtothe“horns” of the gun air cap.

Horn air controls the shape of the spraypattern.

1. When the pattern adjusting valve is closed (turned completely

clockwise) - a round pattern results.

2.Openingthe pattern adjustingvalve(turn counter clockwise)

producesan increasinglywiderand flatterfan pattern.

3. When the maximum spray pattern (widest fan) is achieved,

additional turns will not affect the pattern.

Air Adjusting Valve

The air adjusting valve controls only the flow of air (CFM) to the air cap and has no effect on air pressure (PSI). The

valve is often referred to as the “cheater” valve as it is used to restrict air without adjusting the air regulator.

1. Closing theair-adjusting valve (turncounterclockwise) restricts theair flow.

2. Openingthe valve(clockwise) increases the volume (flow)ofair. This willaffect

the degree of atomization, but will not change the spraypattern.

3.The aircap (CFM) specification willdetermine the(CFM) requirements of thegun.

Using 60-TJR-30-10-G (Glaze Nozzle)

When using the new glaze nozzle the first thing you will notice is that there is no air cap, so you will need no air to

operate this gun with the glaze setup.

1. Once you have placed the glazing needle and nozzle tightly on the gun, choose the

cup you want to use and tighten everything down.

2. Fill the gravity cup with glaze and tighten the lid.

3. Gently press the nozzle tip against the surface you are glazing and pull the trigger.

4. When you come to the point where you no longer want to place the glaze, stop

pulling the trigger and the glaze will stop running from the tip.

5. You can also control the size of your glazing strip by turning the fluid control knob.

6. To clean simply pour out unused glaze and flush with solvent.

To Open

Air Cap Fluid Adjusting Valve

Pattern Adjusting Valve

Air Adjusting Valve Air Inlet

Fluid Inlet

60-TJR-30-10-G wasinspired by

Wayne Smith

Pattern Adjustment Diagram

1 32

Ø Ø

This manual suits for next models

Other C.A. Technologies Paint Sprayer manuals

C.A. Technologies

C.A. Technologies Jaguar 300H User manual

C.A. Technologies

C.A. Technologies TOMCAT 100C Troubleshooting guide

C.A. Technologies

C.A. Technologies Jaguar SLP User manual

C.A. Technologies

C.A. Technologies Panther 200Z User manual

C.A. Technologies

C.A. Technologies Panther 200C User manual

C.A. Technologies

C.A. Technologies Jaguar 300 Series User manual

C.A. Technologies

C.A. Technologies Lynx 100H User manual

C.A. Technologies

C.A. Technologies Lynx L200C User manual

C.A. Technologies

C.A. Technologies Panther 100G 1590 User manual

C.A. Technologies

C.A. Technologies Lynx 100C 1590 User manual

C.A. Technologies

C.A. Technologies CPR User manual

C.A. Technologies

C.A. Technologies Lynx L100C User manual

C.A. Technologies

C.A. Technologies AutoCAT 300C User manual

C.A. Technologies

C.A. Technologies Panther 200H User manual

C.A. Technologies

C.A. Technologies Lynx 100CVT User manual

C.A. Technologies

C.A. Technologies LYNX L100CM Manual

C.A. Technologies

C.A. Technologies CPR User manual

C.A. Technologies

C.A. Technologies Lynx 100CM User manual

C.A. Technologies

C.A. Technologies H2O-CPR-G User manual

C.A. Technologies

C.A. Technologies AutoCAT 100C User manual

C.A. Technologies

C.A. Technologies CAT-Xpress Troubleshooting guide

C.A. Technologies

C.A. Technologies Panther 100G User manual

C.A. Technologies

C.A. Technologies Jaguar 100 Series User manual

C.A. Technologies

C.A. Technologies JAGUAR SLP User manual

Popular Paint Sprayer manuals by other brands

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Operator's manual

Graco

Graco 246737 Repair and parts

Binks

Binks SV100 Service manual

Fimco

Fimco LG-4-3-1 owner's manual

AG SPRAY

AG SPRAY FS-ATV-25BL owner's manual

Nordson

Nordson MicroMax 2 manual

Bonide

Bonide 051 Operation and service instructions

zogics

zogics Z-DAS instruction manual

KISANKRAFT

KISANKRAFT KK-KBS-165 Operation manual

Matrix

Matrix SG 650 Translation of the original instructions

Anest Iwata

Anest Iwata SGA-3 Installation, use & maintenance instruction manual

paasche

paasche VV Instructions and parts list

Carlisle

Carlisle DeVilbiss JGA-510 Service manual

Gardena

Gardena 11120 Operator's manual

Conrad

Conrad Hobby Airbrush K3 operating instructions

wiwa

wiwa 14025 R/F operating manual

Graco

Graco EM 390 Instructions-parts list

DeVilbiss

DeVilbiss LUNA2i Operation manual