Black Box LES1604A User manual

STEP X - Name of Step

24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BLACKBOX.COM

LES1604A, LES1604A-V, LES1604A-T, LES1604A-R, LES1608A

CONSOLE

SERVERS

QUICK START GUIDE

STEP 1 - Check Kit Contents

PACKAGE INCLUDES

Your package should include the following

items. If anything is missing or damaged,

contact Black Box Technical Support

at 877-877-2269 or info@blackbox.com.

• (1) LES1604A, LES1604A-V, LES1604A-T,

LES1604A-R OR LES1608A CONSOLE

SERVER

• (1) DB9F-TO-RJ-45 CROSSOVER SERIAL

ADAPTER

• (1) 12-VDC SWITCHING DC POWER SUPPLY

WITH UK, EU, AU ADAPTERS

• (1) RACKMOUNT KIT (1 EAR, 2 RACK

SCREWS, 2 NUTS, 4 SCREWS)

• (4) ADHESIVE-BACKED RUBBER FEET

• (1) DIGITAL I/O CONVERTER (TERMINAL

BLOCK)

• (1) SIM HOLDER

• (2) ANTENNAS

• THIS QUICK START GUIDE

OPTIONAL: DOWNLOAD USER MANUAL

For product specifications and regulatory

information, refer to the User Manual. You can

download this document from our web site.

1. Go to www.blackbox.com

2. Enter the part number (LES1604A,

LES1604A-V, LES1604A-T, LES1604A-R

or LES1608A) in the search box.

3. Click on the product in the “Product Results”

page.

4. Click on the “Support” tab on the product page,

and select the document you wish to

download.

If you have any trouble accessing the Black Box

site to download the manual, you can contact

our Technical Support at 877-877-2269

or info@blackbox.com

DEFAULT IP ADDRESS/SUBNET MASK

• DEFAULT IP ADDRESS: 192.168.0.1/24

DEFAULT USERNAME AND PASSWORD

• DEFAULT USERNAME: ROOT

• DEFAULT PASSWORD: DEFAULT

STEP 2 - Assemble the Hardware

1. If free-standing: attach the adhesive-backed

rubber feet to the Console Server’s base.

2. If rackmounted: attach the rackmount kit

to the side of the Console Server that will be

connected to the rack.

3. Connect the Console Server to your

primary network via either NET1(C) or

NET1(S). NET1(C) is an RJ-45 port. NET1(S)

accommodates an SFP (Small Form-

factor Pluggable transceiver) module for

connecting to either copper or fiber.

4. For Out-of-Band (OOB) management:

connect a NET2 RJ-45 port to

a management network.

5. Connect other devices to the Console Server’s

free serial ports, USB ports and NET2 Ethernet

ports.

6. Plug in the terminal block and and Digital

Input/Output (DIO) devices.

7. Plug in the 12-VDC power supply and turn on

power to the Console Server.

STEP 3 - Connect to the Console Server

The Console Server is addressable at either

of two IP addresses:

• Its built-in address of 192.168.0.1/24.

• The address its on-by-default DHCP client

accepts from a DHCP server on your network.

1. Using a browser on the same network

as the Console Server‘s NET1 ports with

an IP address in one of the Console Server‘s

network ranges (i.e., 192.168.0.x/24

or the range used by your DHCP server):

enter https://192.168.0.1/ or https://[DHCP-

supplied address]/ in the address bar and

press Enter.

NOTE: the Console Server has a self-signed

SSL certificate. “Untrusted connection”

errors will be present.

2. Click through these errors to load

the Console Server’s login page.

3. Enter the default system username

and password:

• USERNAME: ROOT

• PASSWORD: DEFAULT

and click Submit or press Enter.

4. The Welcome page loads.

NOTE: the Welcome page logs you out after 20

inactive minutes. The current page stays loaded,

however, and clicking any UI element loads the

loads.

Configuration and management options present

in expanded-by-default menus down the left-hand

edge. The top-level menus are Manage, Status,

Serial & Network, Alerts & Logging and System.

The rest of the page lists configuration tasks

required to turn the Console Server into a usable

unit. Some of these tasks will be marked as done

because of the Console Server‘s factory settings.

The following procedures document initial

configuration using the menus rather than the

task list.

STEP 4 - Set the Root User's Password

Set a strong, high-entropy password for the root

user.

1. Click Serial & Network > Users & Groups.

2. Click Edit for the Root User.

3. Enter a strong, high-entropy passcode

in the Password field.

4. Re-enter the passcode in the Confirm field.

5. Click Apply.

Figure 1. Set root user password

STEP 5- Set NET1’s Network Configuration Method

1. Click System > IP.

2. Click Network Interface if it is not

the front-most tab.

3. For Configuration Method, click either

the DHCP or Static radio button.

4. If Static, enter an IP Address and Subnet

Mask for the NET1 interface.

5. Click Apply.

Figure 2. Set NET1 configuration

STEP 6 - Set NET2’s Network Configuration Method

The four Ethernet ports that make up NET2

are set to inactive by default. To activate them:

1. Click System > IP.

2. Click Management LAN Interface to make it

the front-most tab.

3. Click the Deactivate this network interface

checkbox to de-select this option and

activate NET2.

4. For Configuration Method, click either

the DHCP or Static radio button.

5. If Static, enter an IP Address and Subnet

Mask for the NET2 interface. For OOB,

set these for your management network.

For IP-passthrough, set these to match

an unused private IP range.

6. Click Apply.

NOTE: the Console Server’s firewall determines

which protocols and services can access which

ports and devices. HTTPS and SSH are enabled

to the Console Server itself by default. To change

access settings for the Console Server, and for

connected serial ports, click System > Services,

click the Service Access tab and adjust as

required.

STEP 7 - Configure Managed Devices

1. Click Serial & Network > Serial Port. The

Console Server’s serial ports and their labels,

modes and protocols display. To configure

a port:

2. Click Edit.

3. Set the Common Settings for Port x to match

the device connected to serial port x.

4. To enable remote access to the device,

check the Console Server Mode radio button

in Console Server Settings and click

the checkboxes for allowed protocols

(e.g., Telnet, SSH and Web Terminal).

5. Click Apply.

NOTE: Configure user access policies

for connecting to such ports in Serial & Network

> Users & Groups. An AAA server can configure

them remotely. The Console Server User Manual

has details.

NOTES

STEP X - Name of Step

This manual suits for next models

Table of contents

Other Black Box Network Hardware manuals

Black Box

Black Box ServSwitch KV754A User manual

Black Box

Black Box LrA502A-et-r5 User manual

Black Box

Black Box LB9218A User manual

Black Box

Black Box ICOMP User manual

Black Box

Black Box ServSelect KV119A Installation and maintenance instructions

Black Box

Black Box Pow-R-Boot 5+ User manual

Black Box

Black Box IT Pro LNA1000A User manual

Black Box

Black Box NTU-1 User manual

Black Box

Black Box Lineshare Pro AC FX150A User manual

Black Box

Black Box PI1375A User manual

Black Box

Black Box 38891 User manual

Black Box

Black Box RM425A-R3 User manual

Black Box

Black Box USB Director RS-232 User manual

Black Box

Black Box ACU5100A User manual

Black Box

Black Box G.SHDSL NTU LB510A User manual

Black Box

Black Box ServSwitch Octet Series Service manual

Black Box

Black Box COE-8I User manual

Black Box

Black Box LB410A User manual

Black Box

Black Box ME1240A-F User manual

Black Box

Black Box MT190A User manual

Black Box

Black Box Balun G.703 User manual

Black Box

Black Box JPM804A-R2 User manual

Black Box

Black Box LB0010A-A24-R2 User manual

Black Box

Black Box LES1208A-R2 User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide