Black Box MT910A User manual

Connect to V.35,

RS-530, or 10BASE-T

terminal interface

types.

VT100™ control port

ith full DS0 mapping.

Nx56-/64-kbps

channel selection

ith speeds up to

1.544 Mbps.

Loaded ith

diagnostics.

Available as a card

for the Managed

MicroRACK.

1 CSU/DSUs terminate T1/FT1

circuits over a 4-wire RJ-48C

interface. They convert this

interface to .35, RS-530, or

10BASE-T, depending on model.

T1 CSU/DSUs are an excellent

choice for terminating leased

lines, Frame Relay backbones,

and Internet access. They support

Nx56/Nx64 kbps T1 framing as

well as D4/ESF framing options

and AMI/B8ZS/B7ZS line coding,

plus internal, external, and

network clocking.

Data rates, framing, and

coding options are programmed

by DIP switches or through the

consol port from a T100 terminal

or terminal emulator.

A full range of system and

diagnostic features make setup

simple. T1 CSU/DSUs respond to

central-office-initiated D4 loopup

and loopdown codes, ESF line

loop, and payload loop FDL

Terminate T1/FT1 and convert to V.35,

RS-530, or Ethernet.

KeyFeatures

T1CSU/DSUs

messages. They’re compatible

with three .52 (Bit Error Rate)

test patterns and both local and

remote Telco diagnostics.

T1 CSU/DSUs support

framed Nx56/64 kbps rates up to

1.536 Mbps and unstructured

rates to 1.544 Mbps.

The 10BASE-T model is

particularly suited for LAN-to-LAN

connection. MAC forwarding and

PPP/BCP built-in bridging

provides seamless connection

over the T1 link without the need

of routers. PPP/BCP also enables

you to extend a router’s serial

interface for connection to a

remote Ethernet LAN over the

T1 network.

T1 CSU/DSUs are available in

a choice of .35, RS-530, or

10BASE-T interfaces. Choose

from a standalone version or a

rackmount card which fits into our

Managed MicroRACK.

Managed MicroRACK

When space is at a premium,

choose the 16-Port Managed

MicroRACK system. It holds up to

16 cards and fits into only 2U of

rack space.

The MicroRACK accepts one

or two AC or DC power supplies in

any combination. Each power

supply is capable of providing

100% of your rack power

requirements. In the event of

failure, the other supply

immediately takes over and the

MicroRACK notifies you of the

power failure.

The network management

module enables you to configure,

control, and perform diagnostics

using SNMP or HTTP over a

10BASE-T Ethernet connection.

Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: [email protected]

Black Box Corporation.

2/14/2002 #25955

T1 CSU/DSUs

Agency Compliance:

FCC: Part 15 class A and Part 68,

3N8USA-35977-DE-N;

UL: E127709

Clocking: Internal, external, or

network

Coding: AMI or B8ZS

Compliance: FCC Part 15, Class A

and Part 68; AT&T®62411,

TR54016; ANSI T1.403

Diagnostics: .52 511 BERT;

.54 local/remote loop: responds

to CO-initiated loop-up and loop-

down codes; ESF line-loop and

payload FDL messages;

Diagnostics patterns: 511, 2047,

QRSS

DS0 Start Position: Any position,

contiguous/ non-contiguous

mapping when configured via

T100 console

DTE Rates: Nx56/64 kbps

Framing Format: D4 or ESF

perating Temperature: 32 to 122°F

(0 to 50°C)

Humidity Tolerance: 5 to 90%,

noncondensing

Speed: Up to 1.544 Mbps

Interface: T1; plus .35, RS-530, or

10BASE-T

Connectors: All: (1) RJ-48C T1,

(1) DB9 console port;

MT910A-35, MT911C-35:

(1) M/34 F;

MT910A-530, MT911C-530:

(1) DB25 F;

MT910A-10BT, MT911C-10BT:

(1) RJ-45

Power: 100–240 AC

ConnecttwoEthernetLANsoverT1

T1 CSU/DSU

(MT910A-10BT)

T1 CSU/DSU

(MT910A-10BT)

T1 10BASE-T

Network

10BASE-T

Network

CAT5 Cable

(E N737A)

Specifications

Ordering Information

IT M COD

T1 CSU/DSUs

Standalone

.35...................................................................MT910A-35

RS-530 ...........................................................MT910A-530

10BASE-T ..................................................MT910A-10BT

Rackmount

.35 ...................................................................MT911C-35

RS-530............................................................MT911C-530

10BASE-T ..................................................MT911C-10BT

You may also need…

16-Port Managed MicroRACK...................................RM260

SNMP/HTTP Card ......................................RM261C-SNMP

Control Module .........................................................RM262C

AC Power Supply (90–260 AC) .............................PS466A

DC Power Supply (-48 DC) .............................PS466A-DC

Size: Standalone units:

1.5"H x 4.2"W x 5.8"D

(3.8 x 10.7 x 14.7 cm);

Rackmount cards:

3"H x 0.8"W x 7.8"D

(7.6 x 2 x 19.8 cm)

Weight:

Standalone units: 0.8 lb (0.4 kg);

Rackmount cards: 0.4 lb. (0.2 kg)

Managed MicroRACK

Connectors:

PS466A: (1) IEC-320, 3-pin alarm;

PS466A-DC: (3) screw terminals,

3-pin alarm

Power: Single or dual load sharing:

PS466A: 90–260 AC, 50 Hz;

PS466A-DC: -48 DC

Size: 3.5"H x 19"W x 7.3"D

(8.9 x 48.3 x 18.5 cm)

Weight: 6.8 lb. (3.1 kg)

CAT5 Cable

(E N737A)

This manual suits for next models

Table of contents

Other Black Box Network Hardware manuals

Black Box

Black Box LES1208A-R2 User manual

Black Box

Black Box FOM Line Driver-ST User manual

Black Box

Black Box ME0005A-10BT User manual

Black Box

Black Box Secure Site Manager 8 User manual

Black Box

Black Box Time-Division Multiplexor User manual

Black Box

Black Box JPM5E24A-HU User manual

Black Box

Black Box G.SHDSL NTU LB510A User manual

Black Box

Black Box InvisaPC DTX1000-T User manual

Black Box

Black Box KV1308C User manual

Black Box

Black Box ICOMP User manual

Black Box

Black Box MT1050A User manual

Black Box

Black Box TL572A User manual

Black Box

Black Box ServSwitch KV754A User manual

Black Box

Black Box EncrypTight ET0010A User manual

Black Box

Black Box USB Director RS-232 User manual

Black Box

Black Box KVT617A User manual

Black Box

Black Box EncrypTight User manual

Black Box

Black Box RM425A-R3 User manual

Black Box

Black Box SW1009A User manual

Black Box

Black Box DT450A User manual

Black Box

Black Box LT0009A User manual

Black Box

Black Box V.35 FOLD-ST Series User manual

Black Box

Black Box AC504A User manual

Black Box

Black Box FT990A User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide