Black Box Lineshare Pro AC FX150A User manual

CUSTOMER

SUPPORT

INFORMATION

Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX

FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

NOVEMBER 1996

FX150A

Lineshare Pro AC

LineShare Pro

PORT 2

ON/ PORT 1 PORT 3 PORT 4

FCC STATEMENT

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

Class B Digital Device. This equipment has been tested and found to comply with the

limits for a Class B computing device pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a

residential installation. However, there is no guarantee that interference will not occur

in a particular installation. This equipment generates, uses, and can radiate radio

frequency energy, and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. If this equipment does

cause harmful interference to radio or telephone reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult an experienced radio/TV technician for help.

Caution:

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

To meet FCC requirements, shielded cables and power cords are required to connect

this device to a personal computer or other Class B certified device.

LINESHARE PRO

NORMAS OFICIALES MEXICANAS (NOM)

ELECTRICAL SAFETY STATEMENT

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes

de que el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para

referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de

operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo,

cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca,

etc..

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales

que sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como

sea recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más

allá a lo descrito en las instrucciones de operación. Todo otro servicio

deberá ser referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no

interfiera su uso. La colocación del aparato eléctrico sobre una cama,

sofá, alfombra o superficie similar puede bloquea la ventilación, no se

debe colocar en libreros o gabinetes que impidan el flujo de aire por los

orificios de ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de

calor como radiadores, registros de calor, estufas u otros aparatos

(incluyendo amplificadores) que producen calor.

NOM STATEMENT

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo

del tipo descrito en el instructivo de operación, o como se indique en el

aparato.

12. Precaución debe ser tomada de tal manera que la tierra fisica y la

polarización del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no

sean pisados ni pellizcados por objetos colocados sobre o contra ellos,

poniendo particular atención a los contactos y receptáculos donde salen

del aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las

lineas de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no

sea usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean

derramados sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del

aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en

su desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

LINESHARE PRO

TRADEMARKS

All applied-for and registered trademarks are the property of their respective

owners.

LINESHARE PRO

CONTENTS

1. Specifications....................................................................................9

2. Introduction .....................................................................................10

2.1 Before You Begin .....................................................................10

2.2 About the Lineshare Pro .........................................................10

3. Installation........................................................................................12

3.1 Ports on the Lineshare Pro .....................................................12

3.2 Installing the Lineshare Pro on a Single Phone Line

with a Single Phone .................................................................14

3.3 Connecting Telephone Equipment to the Lineshare Pro ....16

3.4 Installing the Lineshare Pro on a Single Phone Line

with Multiple Single-Line Phones...........................................18

3.5 Installing the Lineshare Pro on a Single Phone Line

with Multiple Phones to Maintain Exclusion .........................19

3.6 Installing the Lineshare Pro on a KSU or PBX System .........22

4. Using the Lineshare Pro..................................................................24

4.1 Special Operating Notes..........................................................24

4.2 Lineshare Pro Call Routing.....................................................25

4.3 Answering Incoming Calls.......................................................26

4.4 Answering Calls from Port 1....................................................26

4.5 Answering Calls with a TAD ....................................................26

4.6 Retrieving TAD Messages from a Remote Location ..............27

4.7 Placing an Outbound Call.......................................................27

4.8 Emergency Call Override ........................................................28

4.9 Sending a Fax or Modem Transmission.................................29

4.10 Receiving a Computer Call to a Port .....................................29

4.11 Dialing the Port Access Code from an Extension Phone.....29

4.12 Dialing the Destination Computer through the

Calling Computer ....................................................................30

4.13 Using Single-Frequency Tone Detection..............................31

5. Using the Lineshare Pro’s Custom Features and Functions .........33

5.1 Entering the Programming Mode ..........................................33

5.2 Lineshare Pro Features............................................................34

5.3 Lineshare Pro Functions .........................................................36

5.4 Changing ON/OFF features ...................................................38

[0] Extension Detection .........................................................38

[1] Home Routing. .................................................................39

[2] Secured Operation ...........................................................39

LINESHARE PRO

[3] No Answer Cascade ..........................................................40

[4] Answer/Disconnect Cascade ...........................................41

[5] Pulse Transfer ...................................................................41

[6] Open Line Notification....................................................42

[7] Inbound Tone Transfer ...................................................42

[8] Ring Reduction.................................................................43

[9] Outbound Tone Transfer ................................................43

5.5 Changing Function Options ...................................................44

[2][1] Protocol Tone Access Signal Detection .....................44

[2][2] Dual Tone Detection ..................................................45

[2][3] Protocol Tone Access Signal Assignment ..................45

[3] Cascade Port Order ..........................................................47

[4] Phantom Ring Style ..........................................................48

[5] Emergency Call Override.................................................48

[6] Dual Tone Assignments ...................................................49

[7][5] Time at Home .............................................................49

[7][6] Extension Detection Timer ........................................50

[8] Rings Available to the Ports .............................................50

[8][5] Rings to Answer Call ...................................................51

[9][9][9] Reset to Factory Settings........................................51

LINESHARE PRO

1. Specifications

Connectors — (1) RJ-11 line in,

(4) RJ-11 device ports

Ringer Equivalency — 1.0 B

Operating Temperature — 5° to

113° F (-15° to 45° C)

Maximum Relative Humidity —

85%

MTBF — 56,200 hours

Power — 12 VAC, 830 mA external

transformer

Size — 1.7"H x 5.7"W x 6.1"D

(4.3 x 14.5 x 15.5 cm)

Weight — 3 lb. (1.4 kg)

LINESHARE PRO

2. Introduction

Phone Company Voice Mail:

The phone company’s voice-

mail service is not

compatible with the

Lineshare Pro, but stand-

alone voice mail systems

work well with the Lineshare

Pro.

We recommend that service

for call forwarding, and the

phone company’s voice mail

be discontinued. If you have

problems with call waiting,

simply turn off call waiting

during data transmissions.

2.2 About the Lineshare Pro

The Lineshare Pro is a state-of-the-

art telephone-line sharing device

that eliminates the extra dedicated

telephone lines used to operate a

fax, modem, or other telephone

devices. It quickly directs incoming

telephone calls to one of four

appropriate destinations, typically a

computer modem or fax/modem, a

facsimile machine, a telephone, and

a Telephone Answering Device

(TAD), or any other telephone

device that responds to a standard

phone-company ring signal.

2.1 Before You Begin

This guide is designed to introduce

you to the operating and installation

procedures for using the Lineshare

Pro.

Please read this guide and select

the installation procedures

appropriate for your specific

application before attempting to

connect or operate the Lineshare

Pro.

NOTES

According to standard

industry practice, surge

protection is recommended

for all telecommunications

devices. Surge suppressors

and/or line conditioning

should be used on the input

power supply, as well as the

connected telephone line.

Call Waiting: Fax machine

and modem transmissions

could be disrupted by the

call waiting beep tone.

Call Forwarding: If call

forwarding is enabled, the

Lineshare Pro A/C cannot

process calls on that line.

LINESHARE PRO

Listed below are examples of

various telephone-activated devices

that can be connected to the

Lineshare Pro:

• Fax/modem

• Computer modem

• Facsimile machine

• Telephone Answering Device

(TAD)

• Telephone

• Bulletin Board System (BBS)

• Credit-card authorization

terminal

• Security alarm and monitoring

system

• Order-processing system

• Point-of-sale terminal

• Call diverter

• Fluid-storage system

• Energy-management system

• Money-order dispensing system

• Laser fax cartridge

• Remote diagnostic system

• Time and attendance system

• Flow-monitoring system

The Lineshare Pro can be

configured for various modes of

operation. Read through the rest of

this guide to learn how to properly

operate the Lineshare Pro in each

of these modes.

This manual suits for next models

Table of contents

Other Black Box Network Hardware manuals

Black Box

Black Box Veri-NAC LVN5600A User manual

Black Box

Black Box LMX Series User manual

Black Box

Black Box COE-8I User manual

Black Box

Black Box Veri-NAC Manual

Black Box

Black Box InvisaPC DTX1000-T User manual

Black Box

Black Box CSU/DSU User manual

Black Box

Black Box ACR2005A User manual

Black Box

Black Box FT990A User manual

Black Box

Black Box LT0009A User manual

Black Box

Black Box LB9218A User manual

Black Box

Black Box EME149A-20 User manual

Black Box

Black Box DT450A User manual

Black Box

Black Box V5.1 User manual

Black Box

Black Box IC240A User manual

Black Box

Black Box LES1208A-R2 User manual

Black Box

Black Box TL572A User manual

Black Box

Black Box Palm-Sized Ethernet Switch Express 8-Port... User manual

Black Box

Black Box AC431A User manual

Black Box

Black Box USB Director RS-232 User manual

Black Box

Black Box FOM Line Driver-ST User manual

Black Box

Black Box Lineshare Master - 4 User manual

Black Box

Black Box MT619A-ST-R2 User manual

Black Box

Black Box JPM083A-R3 User manual

Black Box

Black Box LT0009A User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide