Black Box JPM440A User manual

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746

Installation

Use the splice tray with single-mode or multimode fiber cable. Follow the instructions below.

SINGLE-MODE SPLICING

1. Remove the top metal splice tray cover and install the bottom metal splice cover in the wallmount or

rackmount fiber cabinet.

2. Remove the single-mode plastic covers on each of the four single-mode plastic bases already installed in

the bottom metal splice cover.

3. Remove the yellow sticker from one of the single-mode plastic bases.

4. Install a metal sleeve and slide the single-mode fiber through it that you plan to splice. (For single-mode

fiber, you’ll use fusion splicing.)

5. Prepare and splice the fiber.

6. After splicing is complete, snap the spliced fiber in one of the 6 compartment areas in the plastic base.

7. Repeat until all 6 compartments are filled.

8. Re-install the single-mode plastic cover.

9. Repeat steps 2 through 8 for the remaining three single-mode plastic bases as required by your

application.

10. When all single-mode plastic bases are loaded with fiber, use the cable ties to secure the cable. Then

re-install the top metal splice tray cover and tighten the wing nuts (included with the cabinet).

MULTIMODE SPLICING

1. Remove the top metal splice tray cover and install the bottom metal splice cover in the wallmount or

rackmount fiber cabinet.

2. Remove the single-mode plastic covers on each of the four single-mode plastic bases already installed.

3. Remove the larger single-mode plastic bases and install the smaller multimode plastic bases in the bottom

metal splice cover. (The multimode plastic base supports the Corning Cable Systems Non-Adhesive

Mechanical Splice, Corning part number 95-000-04 or Black Box part number FO030.)

4. Splice the multimode fiber. (For multimode fiber, you’ll use mechanical splicing.)

5. After the mechanical splice is done, install the mechanical splice in one of the 6 compartments in the

multimode plastic base.

6. Repeat until all 6 compartments are filled.

7. Re-install the multimode plastic cover.

8. When all multimode plastic bases are loaded with fiber, use the cable ties to secure the cable. Then

re-install the top metal splice cover and tighten the wing nuts (included with the cabinet) to secure the

cable.

TRADEMARKS USED IN THIS MANUAL

Any trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

CUSTOMER

SUPPORT

INFORMATION

JUNE 2004

JPM440A

Splice Tray

Specifications

Size: 0.5"H x 9.4"W x 5.5"D (1.3 x 23.8 x 14 cm)

Weight: 0.8 lb. (0.4 kg)

Overview

The Splice Tray can splice up to 24 strands of single-mode or multimode fiber. It’s used with the Wallmount

Fiber Cabinets [JPM401A-R2–402A-R2] and the Rackmount Fiber Cabinets [JPM406A-R2–407A-R2 and

JPM418A-R2].

What’s Included

Your package should include the following items. If anything is missing or damaged, please contact Black Box

at 724-746-5500.

• (1) top metal splice cover

• (1) bottom metal splice cover

• (25) metal sleeves for single-mode splicing

• (4) single-mode plastic covers and bases (already installed in the bottom splice cover)

• (4) multimode plastic covers and bases

• (30) 3" (7.6-cm) cable ties

• (4) yellow stickers attached to the single-mode plastic bases

Bottom metal

splice cover

Yellow sticker

Single-mode plastic

base

Table of contents

Other Black Box Network Hardware manuals

Black Box

Black Box IC457A-F User manual

Black Box

Black Box LT0009A User manual

Black Box

Black Box MC144A User manual

Black Box

Black Box TS580A-R4 User manual

Black Box

Black Box AC1059A User manual

Black Box

Black Box 5000 series User manual

Black Box

Black Box FOM Line Driver-ST User manual

Black Box

Black Box InvisaPC DTX1000-T User manual

Black Box

Black Box IT Pro LNA1000A User manual

Black Box

Black Box JPM083A-R3 User manual

Black Box

Black Box IC448A User manual

Black Box

Black Box LB300A-R3 User manual

Black Box

Black Box V.35 FOLD-ST Series User manual

Black Box

Black Box MX550A User manual

Black Box

Black Box MT619A-ST-R2 User manual

Black Box

Black Box SW547A User manual

Black Box

Black Box AC1060A User manual

Black Box

Black Box COMPACT T1 User manual

Black Box

Black Box CMA005A User manual

Black Box

Black Box EXPANDABLE CABLE MANAGEMENT RACK RM1400A User manual

Black Box

Black Box SW1009A User manual

Black Box

Black Box LES1604A User manual

Black Box

Black Box FT990A User manual

Black Box

Black Box 38891 User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide