Black Box JPM624A User manual

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746

Figure 3. Terminating the wire conductors.

NOTE: For best performance, keep the untwisted part of the wire less than 0.5 inches (1.3 cm)

long.

Using a punchdown tool, terminate each wire. Push the 110 punchdown tool to the edge

of the 110 connector to trim the conductors. See Figure 3.

4. Optional: Place the stuffer caps on the terminated 110 blocks for added strain relief.

5. Finally, connect the patch cord. Plug the patch cord into the patch panel, then connect it

to the network equipment.

Installation is complete.

TRADEMARKS USED IN THIS MANUAL

Black Box and the Double Diamond logo are registered trademarks of BB Technologies,

Inc.

UL is a registered trademark of Underwriters Laboratories, Inc.

All other trademarks mentioned in this manual are acknowledged to be the property of the

trademark owners.

CUSTOMER

SUPPORT

INFORMATION

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

NOVEMBER 2008

JPM624A

JPM648A

CAT6 Patch Panels

Introduction

Use our CAT6 Patch Panels to consolidate cabling in wiring closets. These sturdy

panels meet Category 6 performance requirements, and their universal wiring

enables you to terminate each cable to either T568A or T568B wiring schemes.

Simply follow the color-coded guides on the panel; they identify the sequence of

cable pair terminations.

You should have received the following items:

• (1) CAT6 Patch Panel

• (8) or (16) cable ties

• (4) 10-32 cuphead screws

• (4) 12-24 cuphead screws

• (1) bag of stuffer caps

• This user's manual

If anything is missing or damaged, please contact Black Box at 724-746-5500.

You will also need a punchdown tool to terminate the horizontal cable to the patch

panel. The punchdown tool is not included with your patch panel.

Specifications

Standards: T568A and T568B

Connectors: JPM624A: (24) RJ-45, (24) 4-pair 110 punchdown;

JPM648A: (48) RJ-45, (48) 4-pair 110 punchdown

Electrical: Insulation Resistance: 500 MΩ;

Dielectric Withstanding Voltage: 1000V;

DC Current Rating: 1.5 Amps;

DC Resistance: 0.1 Ω;

Contact Resistance: 20 mΩ

CAT6 Patch Panels

Material: High-impact UL®94V-2 resin;

Spring wire: Phosphor bronze 5100W temper wire,

50-microinch gold over 100-microinch nickel undercoat;

IDC plastic: High-impact UL®94V-2 resin;

IDC contact: Phosphor bronze tin over 60-microinch nickel

undercoat

Physical Characteristics: Insertion life: 750 mating cycles with FCC-

compliant RJ-45 plug;

IDC durability: 200 termination cycles;

Contact compatibility: Accommodates 22-24 AWG solid;

Operating temperature range: +14 to +140˚F (-10 to +60˚C)

Storage temperature range: -40 to +154˚F (-40 to 68˚C)

Humidity: 10% – 90%, relative

Size: JPM624A: 1.75"H (1U) x 19"W x 1.4"D (4.4 x 48.3 x 3.6 cm);

JPM648A: 3.5"H (2U) x 19"W x 1.4"D (8.9 x 48.3 x 3.6 cm)

Weight: JPM624A: 1.4 lb. (0.6 kg);

JPM628A: 2.5 lb. (1.1 kg)

Installation

1. Use the correct set of supplied screws on each of the four corners of the patch panel

and tighten them securely. If necessary, use a screwdriver to tighten each screw.

2. Prepare the cable by stripping about 2 inches (5.1 cm) of the cable jacket. Be careful

not to damage the twisted wire!

3. Next, punch down the cable. Place each wire pair next to the appropriate wiring color/

label. Refer to Figures 1 and 2 for T568A and T568B color codes.

Figure 1. Color codes on

the T568A side of the

wiring label.

Figure 2. Color codes on

the T568B side of the

wiring label

This manual suits for next models

Table of contents

Other Black Box Network Hardware manuals

Black Box

Black Box ServSelect KV119A Installation and maintenance instructions

Black Box

Black Box COE-8I User manual

Black Box

Black Box ETHERLINK IV User manual

Black Box

Black Box LB410A User manual

Black Box

Black Box 16-Port Rackmount 10/100 User manual

Black Box

Black Box MT330A User manual

Black Box

Black Box FX6412NA User manual

Black Box

Black Box EME149A-20 User manual

Black Box

Black Box JPM806A-HD User manual

Black Box

Black Box FT990A User manual

Black Box

Black Box ACR2005A User manual

Black Box

Black Box CSU/DSU User manual

Black Box

Black Box Internet Sharer FX850A User manual

Black Box

Black Box JPM083A User manual

Black Box

Black Box Time-Division Multiplexor User manual

Black Box

Black Box Balun G.703 User manual

Black Box

Black Box MX325A-HS User manual

Black Box

Black Box Lineshare Master - 4 User manual

Black Box

Black Box InvisaPC DTX1000-T User manual

Black Box

Black Box COMPACT T1 User manual

Black Box

Black Box KVT617A User manual

Black Box

Black Box Palm-Sized Ethernet Switch Express 8-Port... User manual

Black Box

Black Box JPM260 User manual

Black Box

Black Box SW547A User manual

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide