Avision FL-1006S User manual

Sheet-fed Duplex Scanner

Getting Started

Regulatory model: FL-1006S

Avision Inc.

English

Trademarks

Microsoft is a U.S. registered trademark of Microsoft Corporation.

Windows, Windows Vista, Windows 7 and Windows 8 are either

registered trademarks or trademarks of Microsoft Corporation in

the United States and/or other countries.

IBM, IBM PC are registered trademarks of International Business

Machines Corp.

Other brands and product names herein are trademarks or

registered trademarks of their respective holders.

reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language or computer language,

in any form or by any means, electronic, mechanical, magnetic,

optical, chemical, manual, or otherwise, without the prior

written permission of Avision Inc.

Material scanned by this product may be protected by

governmental laws and other regulations, such as copyright

laws, the customer is solely responsible for complying with all

such laws and regulations.

Warranty

The information contained in this document is subject to

change without notice.

Avision makes no warranty of any kind with regard to this

material, including, but not limited to, the implied warranties

of fitness for a particular purpose.

Avision shall not be liable for errors contained herein or for

incidental or consequential damages in connection with the

furnishing, performance, or use of this material.

iii

Table of Contents

1. Introduction.............................................. 1-1

2. Scanner Installation .................................. 2-1

2.1 Installing the Scanner Driver and Connecting

the Cables................................................. 2-1

3. Completing Your First Scan .......................3-1

3.1 Loading Your Paper .................................... 3-1

3.2 Verifying Your Scanner Installation ............... 3-5

4. ISIS Interface Operation........................... 4-1

5. Using the Buttons...................................... 5-1

5.1 Installing Button Manager V2 ....................... 5-1

5.2 Checking the Button Configurations before

Scanning................................................... 5-2

5.3 Scanning From One Touch of the Buttons ...... 5-4

6. Maintenance.............................................. 6-1

6.1 Cleaning the ADF ....................................... 6-1

6.2 Cleaning the Calibration Area ....................... 6-2

7. Troubleshooting ........................................ 7-1

7.1 Clearing a Paper Jam .................................. 7-1

1-1

1. Introduction

Congratulations on your purchase of the color sheet-fed

image scanner. With this scanner, you can scan documents

in duplex (double-sided) mode to increase productivity.

Before you install and operate the new scanner, please take

a few minutes to read through this manual. It provides

proper instructions for you to unpack, install, operate and

maintain the scanner.

The following figure indicates the package contents. Please

check all the items against your checklist. If you do not

receive all the items, please contact your authorized local

dealer immediately.

1-2

1. Scanner Main Unit

2. Software CD

3. USB Cable

4. Power Adapter & Power Cord

Note:

1. Only use the AC adapter included in the machine. Using

other AC adapters may damage the machine and void the

warranty.

2. Please unpack the packing carefully, and check the contents

against the checklist. If any items are missing or damaged,

please contact your dealer immediately.

3 4

2-1

2. Scanner Installation

2.1 Installing the Scanner Driver and Connecting the

Cables

NOTE:

1). The Windows system CD may be required when installing

on some PC’s.

2). To ensure your computer can identify the USB scanner,

please install scanner driver first before connecting the

scanner to your computer.

3). The scanner driver contains TWAIN, ISIS and WIA driver.

If you are running Windows Me, Windows XP, or Windows

Vista, after the installation of scanner driver is completed,

this scanner allows you to scan via a TWAIN, ISIS, or a

WIA interface. Start your TWAIN-compliant image editing

software application to select a TWAIN or WIA user

interface or your ISIS software to select an ISIS user

interface. You may also launch Microsoft’s Scanner and

Camera Wizard to scan via a WIA user interface.

2.1.1 Connecting to Power

Before connecting, make sure the power switch is off.

Plug the small end of the power adaptor into the power jack of

your scanner. Insert the other end to an appropriate power

outlet.

2-2

2.1.2 Turning on the Power

Press the Power Switch button on the front panel, the Power

LED will be lit. To turn off the scanner, press the Power

Switch button for about 3 seconds, the Power LED will be off.

2.1.3 Installing the Scanner Driver

1. Place the supplied CD-ROM onto your CD-ROM drive.

2. The software installation graphic appears. If not, run

“setup.exe”.

2-3

Contents on the installation graphic:

Install Button Manager V2: To use the buttons

on the scanner, you need to install Button Manager

V2. To ensure Button Manager V2 works properly,

please FIRST install Button Manager V2 before

installing the scanner driver.

Install Scanner Driver: To communicate with

your scanner, you need to install the scanner driver.

After installing the Button Manager V2 software,

click Install Scanner Driver to install the scanner

driver on your computer.

Install Adobe Reader: To view the user’s

manuals for the scanner and Button Manager V2,

you need to use Adobe Reader to open and view the

manuals in pdf file format. If you already have

Adobe Reader installed on your computer, you may

disregard this item.

2-4

View Manual: Click “View Manual” to view or

print the detailed user manual for the scanner and

Button Manager V2 respectively.

3. Click Install Button Manager V2 to install the Button

Manager V2 software and then click Install Scanner

Driver to install the scanner driver on your computer.

2.1.4 Connecting to Computer

1. Connect the square end of the USB cable to the USB port of

your scanner. Connect the rectangle end to the USB port of

your computer.

2. The computer should detect a new USB device and prompt

a “New Hardware Found” message.

3. In Windows XP, click the Next button to continue. When

the XP certification screen appears, click Continue

Anyway to complete the installation.

4. When the Finish dialog is prompted, click the Finish

button.

3-1

3. Completing Your First

Scan

3.1 Loading Your Paper

3.1.1 Notice on Using the ADF

Before using the ADF, please make sure that your paper meets

the following specifications:

Document(s) can range in size from 2.9 by 2 inches to

8.5 by 14 inches (Legal).

Document(s) can range in weight from 7 to 110 lbs (28

~400 g/m2)

ID cards up to 1.25 mm thick

Document(s) should be square or rectangular and in good

condition (not fragile or worn).

Document(s) should be free of curl, wrinkle, tears, wet

ink, or punch holes.

Document(s) should be free of staples, paper clips, paper

sticky notes.

Other manuals for FL-1006S

Table of contents

Other Avision Scanner manuals

Popular Scanner manuals by other brands

Plustek

Plustek Scanner user guide

Z/I Imaging

Z/I Imaging PhotoScan 2001 instructions

Renkforce

Renkforce DS100-5M operating instructions

Image Access

Image Access WideTEK A2 Operation manual

Canon

Canon imageFORMULA CR-120N user manual

Fujitsu

Fujitsu FI-4860C2 Specifications

GeoSlam

GeoSlam ZEB Horizon Hardware guide

Kodak

Kodak i5800 Scanner Brochure & specs

Kodak

Kodak i7300 user guide

Revopoint

Revopoint POP user manual

Fujitsu

Fujitsu fi-4860C installation guide

Eddyfi Technologies

Eddyfi Technologies Floormap X user manual

Faselase

Faselase F6 user manual

Fujitsu

Fujitsu CardMinder user guide

Uniden

Uniden BC340CRS owner's manual

Infinite Peripherals

Infinite Peripherals INFINEA TAB M user manual

Mustek

Mustek PageExpress 4800 Pro user guide

Optex

Optex 750830 owner's manual