Avision BT-0911S User manual

A3 Bookedge Scanner

Getting Started

Regulatory model: BT-0911S

Avision Inc.

ENGLISH

Trademarks

Microsoft is a U.S. registered trademark of Microsoft

Corporation.

Windows, Windows Vista, Windows 7 and Windows 8 are either

registered trademarks or trademarks of Microsoft Corporation in

the United States and/or other countries.

IBM, IBM PC are registered trademarks of International Business

Machines Corp.

Other brands and product names herein are trademarks or

registered trademarks of their respective holders.

reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language or computer language,

in any form or by any means, electronic, mechanical, magnetic,

optical, chemical, manual, or otherwise, without the prior

written permission of Avision Inc.

Material scanned by this product may be protected by

governmental laws and other regulations, such as copyright

laws, the customer is solely responsible for complying with all

such laws and regulations.

Warranty

The information contained in this document is subject to

change without notice.

Avision makes no warranty of any kind with regard to this

material, including, but not limited to, the implied warranties

of fitness for a particular purpose.

Avision shall not be liable for errors contained herein or for

incidental or consequential damages in connection with the

furnishing, performance, or use of this material.

iii

Table of Contents

1. Introduction.............................................. 1-1

2. Scanner Installation.................................. 2-1

2.1 Unlocking your scanner ................................ 2-1

2.2 Installing the Scanner Driver and Connecting

the Cables .................................................. 2-2

3. Completing Your First Scan ....................... 3-1

3.1 Loading Your Paper...................................... 3-1

3.2 Verifying Your Scanner Installation ................ 3-2

3.3 A Glance of the Scanner Properties Dialog Box ... 3-5

4. ISIS Interface Operation........................... 4-1

5. Using the Buttons ..................................... 5-1

5.1 Installing Button Manager V2........................ 5-1

5.2 Checking the Button Configurations before

Scanning.................................................... 5-1

5.3 Scanning From One Touch of the Buttons ....... 5-4

6. Maintenance.............................................. 6-1

6.1 Cleaning the Glass....................................... 6-1

7. Using and Caring the Optional Auto

Document Feeder ...................................... 7-1

7.1 Installing the Auto Document Feeder ............. 7-1

7.2Loading Your Paper...................................... 7-2

1-1

1. Introduction

Congratulations on your purchase of the Avision’s A3-sized

bookedge scanner. Avision is one of the leading companies to

make high quality color image scanner.

Before you install and operate the new scanner, please take

a few minutes to read through this manual. It provides

proper instructions for you to unpack, install, operate and

maintain the scanner.

The following figure indicates the package contents. Please

check all the items against your checklist. If you do not

receive all the items, please contact your authorized local

dealer immediately.

1. Scanner Main Unit

2. Software CD/Quick Guide

3. USB Cable

4. Power Adapter & Power Cord

Note:

Only use the AC adapter DA-48M24 by APD included in the

machine. Using other AC adapters may damage the machine

and void the warranty.

2-1

2. Scanner Installation

2.1 Unlocking your scanner

To protect the scanning unit from damage during transportation,

a lock switch is designed at the back of the scanner to keep the

scanning unit from moving. To unlock the scanner, move the

lock switch down as shown in Fig. 2-1.

Figure 2-1 Unlocking the Scanner

Figure 2-2 Home position

Note: If the scanning unit is not located at the front of the

scanner before transporting the scanner, be sure to do the

follows:

1. Turn on the scanner. The scanning unit should move to

the front of the scanner.

2. Press the lock switch down to the “Lock position”.

3. The scanner is now ready to transport.

Scanning unit at

this position

before locking the

scanner

2-2

2.2 Installing the Scanner Driver and Connecting the

Cables

NOTE:

1). The Windows system CD may be required when installing

on some PC’s.

2). To ensure your computer can identify the USB scanner,

please install scanner driver first before connecting the

scanner to your computer.

3). The scanner driver contains TWAIN, ISIS and WIA driver.

If you are running Windows Me, Windows XP, or Windows

Vista, after the installation of scanner driver is completed,

this scanner allows you to scan via a TWAIN, ISIS, or a

WIA interface. Start your TWAIN-compliant image editing

software application to select a TWAIN or WIA user

interface or your ISIS software to select an ISIS user

interface. You may also launch Microsoft’s Scanner and

Camera Wizard to scan via a WIA user interface.

2.2.1 Connecting to Power

Before connecting, make sure the power switch is off.

Plug the small end of the power adaptor into the power jack of

your scanner. Insert the other end to an appropriate power

outlet.

2-3

2.2.2 Turning on the Power

Press the Power Switch button on the front panel, the Power

LED will be lit. To turn off the scanner, press the Power

Switch button for about 3 seconds, the Power LED will be off.

2.2.3 Installing the Scanner Driver

1. Place the supplied CD-ROM onto your CD-ROM drive.

2. The software installation graphic appears. If not, run

“setup.exe”.

2-4

Contents on the installation graphic:

Install Button Manager V2: To use the buttons

on the scanner, you need to install Button Manager

V2. To ensure Button Manager V2 works properly,

please FIRST install Button Manager V2 before

installing the scanner driver.

Install Scanner Driver: To communicate with

your scanner, you need to install the scanner driver.

After installing the Button Manager V2 software,

click Install Scanner Driver to install the scanner

driver on your computer.

Install Adobe Reader: To view the user’s manuals

for the scanner and Button Manager V2, you need to

use Adobe Reader to open and view the manuals in

pdf file format. If you already have Adobe Reader

installed on your computer, you may disregard this

item.

View Manual: Click “View Manual” to view or

print the detailed user manual for the scanner and

Button Manager V2 respectively.

3. Click Install Button Manager V2 to install the Button

Manager V2 software and then click Install Scanner

Driver to install the scanner driver on your computer.

Other manuals for BT-0911S

Table of contents

Other Avision Scanner manuals

Popular Scanner manuals by other brands

Plustek

Plustek Scanner user guide

Z/I Imaging

Z/I Imaging PhotoScan 2001 instructions

Renkforce

Renkforce DS100-5M operating instructions

Image Access

Image Access WideTEK A2 Operation manual

Canon

Canon imageFORMULA CR-120N user manual

Fujitsu

Fujitsu FI-4860C2 Specifications

GeoSlam

GeoSlam ZEB Horizon Hardware guide

Kodak

Kodak i5800 Scanner Brochure & specs

Kodak

Kodak i7300 user guide

Revopoint

Revopoint POP user manual

Fujitsu

Fujitsu fi-4860C installation guide

Eddyfi Technologies

Eddyfi Technologies Floormap X user manual

Faselase

Faselase F6 user manual

Fujitsu

Fujitsu CardMinder user guide

Uniden

Uniden BC340CRS owner's manual

Infinite Peripherals

Infinite Peripherals INFINEA TAB M user manual

Mustek

Mustek PageExpress 4800 Pro user guide

Optex

Optex 750830 owner's manual