Avery Dennison ALX 92x Operating manual

11/04 Rev. 3.01-01 OPERATOR / SERVICE MANUAL

All Printers

Safe Operation of Thermotransfer

Label Printers

Information and qualifications ....................... 2

Where are warnings given? ...................... 2

Warnings in the text .................................. 2

General safety notes ................................. 3

Information must be made available ......... 3

Ensure necessary qualifications ................ 4

Machine operating safety ..............................5

Appropriate use .........................................5

Protect against injuries that can result from

electrical current ........................................5

Protect against injuries that can result from

mechanical actions ....................................5

Disposal measures ........................................6

11/04 Rev. 3.01-01 OPERATOR / SERVICE MANUAL Safety

All Printers

Information and qualifications

Where are warnings given?

General notes on safety are found in this section.

Special safety notes and warnings are provided at the at the top of descripti-

ons of possibly dangerous operations in the user and service manual of the

printer.

¯Warning notes and warning symbols are also attached directly to the de-

vices and device components. Pay attention to these safety notes as well!

Warnings in the text

Important text passages which must absolutely be followed are particularly

marked for special attention:

WARNING!

A warning notice indicates risks which could result in death or serious injury

of the personnel!

«The notice contains safety instructions on how to safeguard possibly affec-

ted personnel. The instructions must be followed.

CAUTION!

A caution notice indicates risks which, if unheeded, could lead to material

damage or bodily injury (minor injuries).

«The notice contains instructions on how to prevent damage or injury. The

instructions must be followed.

11/04 Rev. 3.01-01 OPERATOR / SERVICE MANUAL Safety

All Printers

General safety notes

Information must be made available

This operating manual

«is to be stored at the machine operating location and made accessible to the

operator.

«is to be maintained in legible condition.

«Safety and warning notices attached to the machine must be kept clean and

legible. Missing or damaged warning labels and plates are to be replaced.

WARNING!

Safe and efficient operation of the printer can only be guaranteed if you

observe all necessary information.

«Before operating the printer, read the operating instructions and all other

notes carefully.

«Observe the additional safety and warning notes on the machine.

«Only operate the printer using the system voltage indicated on the name-

plate!

«Only connect the printer to a grounded power socket fitted to authorized

standards!

«Make sure that the power supply socket for the printer is readily accessible!

«Only use the printer in enclosed areas with normal environmental conditi-

ons (standard office temperatures)!

«Only operate the printer when the cover is closed!

«Only trained and authorized personnel should operate the printer!

«During operation, the printhead can become hot! Care should be taken

when touching the printhead!

«Do not make any modifications or any additional casing for the printer!

«Do not allow any liquids to enter into the printer!

«Repairs to the printer may only be performed by authorized specialists who

are aware of the risks involved!

«In case of emergency, switch off the printer and disconnect the power

supply cable!

«Before cleaning, switch off the printer and disconnect from the power!

«Only use original accessories!

«Connect the printer only to devices that fulfil SELV (safety extra-low

voltage) circuit requirements to EN 60950!

«Keep long hair, loose jewellery, long sleeves, etc. away from rotating parts

of the printer!

11/04 Rev. 3.01-01 OPERATOR / SERVICE MANUAL Safety

All Printers

Ensure necessary qualifications

«Only allow the machine to be operated, adjusted and serviced by instructed

and authorised personnel.

«Train at least 2 persons to operate the machine.

Instruction of the operating personnel must ensure

– that operating personnel can use the machine independently and without

posing a danger.

– that operating personnel can remedy minor operational malfunctions them-

selves.

«Make label materials for test purposes available in sufficient quantities.

«Moreover, personnel are to be regularly instructed about work safety and en-

vironmental protection issues.

«The responsibilities for operation, adjustment and servicing of the machine

must be clearly defined and consistently maintained.

«Only make adjustments to the machine in accordance with this manual and

with all due care.

Service Special servicing, fault searching and fault correction are to be carried out by

the manufacturer, his appointees or other authorised service agents. This

also includes the optional installation and refitting of components.

11/04 Rev. 3.01-01 OPERATOR / SERVICE MANUAL Safety

All Printers

Machine operating safety

Appropriate use

Thermotransfer label printers are designed for printing label material, using

the thermal or thermal transfer printing process. It is possible to use a wide

range of label materials and thermal transfer ribbons, which must both be

supplied in shape of rolls.

The actual stipulated usage is detailed in the technical specifications of the

respective devices.

PFor details refer to topic section „Specifications“ in the user manual of the

printer.

Avery Dennison assumes no liability for damage due to improper use of the

printer.

Protect against injuries that can result from electrical

current

Protect against injuries that can result from mechanical

actions

WARNING!

The printer is connected with the mains supply! Contact with energised

components can result in life-endangering currents through the body as

well as burns.

«Only put the machine into operation when installed in a correctly installed

housing.

«The housing may only be removed by trained personnel when the machine

is de-energised.

«Pull out the mains power connection plug from the socket before cleaning

and maintenance.

«In case fluids penetrate into themachineinterior, immediately switch off the

machine and disconnect or plug out from the mains power supply.

WARNING!

Risk of injury during maintenance work due to moving or rapidly rotating

parts! The following regulations always apply:

«Keep long hair, loose garments, jewellery etc. away from rotating parts of the

printer.

«Switch off the machine before performing mechanical adjustment tasks.

11/04 Rev. 3.01-01 OPERATOR / SERVICE MANUAL Safety

All Printers

Disposal measures

During the production of the individual components, the manufacturer ensu-

res that as little an impact is made on the environmental as possible. When

it comes to disposal, youas the user havea considerableinfluence in helping

to reduce the strain on the environment.

For details about the disposal of material (e. g. ribbon) please consult the re-

spective manufacturer. Please heed the following notes regarding the dispo-

sal of packaging, defect components after maintenance or repair work, or

even the disposal of the printer after the end of the product's service life:

«Dispose of waste properly, i.e. sorted according to the material groups of the

parts to be disposed of. The aim should always be to achieve a maximum

possible reutilisation of the basic materials combined with the minimum pos-

sible environmental impact.

Therefore, pay attention to the following:

•First of all, remove problem materials from the device and dispose of them

separately. Problem materials are e.g. batteries, LCD displays and parts con-

taining mercury.

•Thenseparatetheremainingpartsas muchas possibleaccording tomaterial

for recycling.

«Pay attention to the material and disposal instructions which may be included

on certain individual parts.

«Under no circumstances should you simply throw electrical or electronic

scrap into the rubbish bin.

«Use environmentally compatible alternatives such as returning waste to the

suppliers or the manufacturer, disposal by specialised waste disposal firms,

exchange services, etc.

«Fundamentally dispose of waste in as environmentally compatible a manner

as today's environmental protection, reprocessing and disposal systems al-

low.

«Refer to your supplier, the appropriate disposal firms or directly to the manu-

facturer if you have any disposal problems. The manufacturer can provide

you with information and help you to dispose of components from the printer

range in a modern and environmentally compatible manner.

Other manuals for ALX 92x

Table of contents

Other Avery Dennison Printer manuals

Avery Dennison

Avery Dennison 9417 User manual

Avery Dennison

Avery Dennison Monarch Tabletop Printer 2 User manual

Avery Dennison

Avery Dennison TrafficJet User manual

Avery Dennison

Avery Dennison Monarch 9825 User manual

Avery Dennison

Avery Dennison Monarch ADTP1 User manual

Avery Dennison

Avery Dennison Monarch 9419 Service manual

Avery Dennison

Avery Dennison Monarch 9419 User manual

Avery Dennison

Avery Dennison Monarch 9433 Sierra Sport3 Service manual

Avery Dennison

Avery Dennison Monarch 9460 User manual

Avery Dennison

Avery Dennison FRESHMARX 9416 Technical Document

Avery Dennison

Avery Dennison ALS 204 User manual

Avery Dennison

Avery Dennison Monarch Service manual

Avery Dennison

Avery Dennison Monarch 9854 User manual

Avery Dennison

Avery Dennison Monarch 9419 User manual

Avery Dennison

Avery Dennison Monarch SIERRA SPORT4 9493 User manual

Avery Dennison

Avery Dennison Pathfinder 6140 Technical Document

Avery Dennison

Avery Dennison FreshMarx 9417 User manual

Avery Dennison

Avery Dennison Monarch 9485 User manual

Avery Dennison

Avery Dennison Wireless Ethernet Print Server Monarch 7411 User manual

Avery Dennison

Avery Dennison AP7.t User manual

Avery Dennison

Avery Dennison Monarch 9485 User manual

Avery Dennison

Avery Dennison SNAP 500 User manual

Avery Dennison

Avery Dennison LOKPRINT 676 User manual

Avery Dennison

Avery Dennison FRESHMARX 9415 Service manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide