Argo LARI User manual

V 12/21

PORTABLE AIR CONDITIONER (LOCAL)

LARI

OPERATING INSTRUCTIONS

Read the instructions carefully before operating the appliance or carrying out maintenance work.

Observe all the safety instructions; failure to do so may lead to accidents and/or damage. Store these

instructions in a safe place for future reference.

V 12/21

The Refrigerant R290

To realize the function of the air conditioner unit, a special refrigerant circulates in the

system. The refrigerant is the fluoride R290 = 3 GWP (Global warming potential). This

refrigerant is flammable and inodorous. It can lead to explosions under certain

conditions, however the flammability of this refrigerant is very low and it can be ignited

only by fire.

Compared to other common refrigerants, R290 is a non-polluting refrigerant with no

harm to the ozonosphere and a no effect upon the greenhouse effect. R290 has very

good thermodynamic features which lead to a really high energy efficiency. The units

therefore need less filling.

Warning:

Do not try to accelerate the defrosting process or to clean the appliance in different ways other

than those recommended by the manufacturer. Should repair be necessary, contact your

nearest authorized Service Centre. Any repairs carried out by unqualified personnel may be

dangerous. The appliance has to be stored in a room that doesn’t have any continuously

operating ignition sources. (for example: open flames, an operating gas appliance or an

operating electric heater.) Do not pierce or burn.

Appliance has to be installed, used and stored in a room with a floor area larger than 7 m2.

For repairs, strictly follow manufacturer’s instructions only for appliances filled with R290

flammable gas. Be aware that refrigerants do not have any odour.

Appliance is filled with flammable gas R290.

Before installing and using the appliance, read the

owner manual.

Before installing the appliance, read the installation

manual.

Any repairs you need, contact the nearest authorized

Service Centre and strictly follow manufacturer’s

Service Manual.

V 12/21

GENERAL OPERATING AND SAFETY INSTRUCTIONS

This appliance is a local air conditioner designed for domestic use.

Only use this air-conditioner as described in this manual.

Ensure that the required voltage and frequency (220-240V/50 Hz)

match the available power source.

Fuse style 5ET or SMT 250V, the electricity passing through the

fuse cannot be above 3.15A.

This appliance can be used by children aged from 8 years and

above and people with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a

safe way and understand the hazards involved.

Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children

without supervision.

Ensure that the electricity system is able to deliver the operating

current required by the air conditioner, in addition to that normally

absorbed by other appliances (household appliances, lighting

system, etc.). Please refer to the maximum power input data

indicated on the air conditioner's data plate.

Connection to the electricity grid must take place in accordance with

current installation standards.

Ensure that the automatic switches and system protection valves

are able to withstand a start-up current of 6A (normally for less than

1 second).

The system socket must always be fitted with an efficient earth

connection.

Make sure that the plug is fully inserted. Do not use multiple

adapters. Do not touch the plug with wet hands. Make sure that the

plug is clean.

V 12/21

Do not use the plug as a means by which to start/stop the air

conditioner: use the ON/OFF button on the remote control or on the

control panel.

Do not install the air conditioner in rooms where it may receive

water splashes (e.g. laundry rooms).

Before moving or cleaning the device, ensure that it is unplugged

from the socket.

Do not move the air conditioner while it is operating; first turn the

appliance off, check for any condensate build-up and empty it if

necessary.

To turn the appliance off, set the remote control to OFF and remove

the plug from the socket. Pull on the plug only. Do not pull the cord.

Do not use the appliance if the cord or plug are damaged. If the

power supply cable is damaged, it must be replaced by the

manufacturer or its technical assistance service or in any case by a

person with similar qualifications, in order to prevent any risk.

The appliance must be installed in compliance with national wiring

regulations.

Keep the unit away from fire, possible fire sources, inflammable or

explosive objects.

Do not leave the unit unattended while it’s operating, turn the unit off

and unplug it.

If drainage hose is used, the ambient temperature musnt’t be lower

than 0°C. It can cause water leakage to the air conditioner.

Do not splash or pour water on the air conditioner

PRECAUTION!

Do not insert any objects into the air conditioner: this is very

dangerous as the fan turns at high speed.

Ensure that air circulates freely around the unit. Do not cover

the air intake and delivery grilles with drapes or any other

means.

V 12/21

WARNING!

The air conditioner must be positioned at least 50 cm from the wall

or any other obstacles, on a flat and stable surface so as to avoid

water leaks.

The air conditioner is fitted with a system for protecting the

compressor from overload. This means that the compressor

only starts 3 minutes after its previous stoppage.

Please wait at least 3 minutes before starting the unit. This

helps prevent the compressor from being damaged.

WARNING!

In the event of an anomaly, switch the appliance off and unplug

it from the socket. Do not dismantle or attempt to repair or

modify the product. In the event of a malfunction, contact the

service centre directly.

WARNING!

Do not expose the air conditioner to direct sunlight, as the

colour of the materials may change; moreover, the appliance

may overheat causing the protection mechanism to intervene

and switch the appliance off.

Do not use insecticides, oils, detergents or spray paints near

the appliance; do not use aggressive chemical detergents to

clean the casing: this may damage the finish and colour.

Close all open windows to maximise air conditioning

efficiency.

The manufacturer will not be held liable if safety and accident

prevention rules are not observed.

V 12/21

DESCRIPTION OF THE APPLIANCE

FRONT VIEW REAR VIEW

1) CONTROL PANEL 5) CASTER

2) AIR OUTLET WITH ADJUSTABLE LOUVER 6) HOLE FOR CONTINUOUS CONDENSATE

3) HANDLE DRAINAGE (IN COOLING MODE)

4) AIR INLET WITH AIR FILTER 7) AIR EXHAUST

Min/max operating limits (internal temperature)

Cooling: 7°C DB / 35 °C DB

Dehumidification: 17°C DB / 35 °C DB

Cooling mode room temperature adjustment range: 16 °C DB / 32 °C DB

PRE-OPERATING CHECKS AND OPERATIONS

The following space must be maintained to ensure the operating efficiency of the portable air conditioner.

50 cm

V 12/21

APPLIANCE START-UP

Open the packaging and pull out the box. Remove the product and the other elements supplied (illustrated in the box

below).

Infrared remote control

Type-AAA – LR03 – 1.5 V

batteries for remote control.

(Not provided)

Flexible pipe inclusive of fitting for unit and end

fitting for window

Round fitting for window unit, to

be positioned between the end

of the tube and the window unit

itself

Window unit kit with plug.

Position the product vertically on a flat and stable surface, as close as possible to a window and at least 50 cm from

walls or other nearby obstacles.

USE WITH END FITTING FOR WINDOW

1. Stretch the flexible hose sufficiently so that it

reaches the outside (max 1.5 m) and hook it to the rear

part of the air conditioner.

2. Open the window and lock one of the two leaves

with the handle.

Rest the terminal connection on the fixed leaf, bring

the other leaf of the window close.

3. Open the window and lock one of the two leaves

with the handle.

Rest the terminal connection on the fixed leaf, bring

the other leaf of the window close.

V 12/21

USE WITH WINDOW UNIT KIT

1. To make the hole in the glass it is advisable to

take the porthole kit accessory to the glazier.

2. Insert the window unit into the window.

3. Insert the round fitting into the retractable flexible

pipe and insert the latter with its round fitting into

the window unit without the plug.

4. Insert the round fitting onto the flexible pipe.

5. Insert the flexible pipe thus mounted into the rear of the

air conditioner.

Connect the power cord to a suitable electric socket (220–240 V). Insert the supplied batteries into the remote control

and make sure the poles match. Select the desired operating mode from the remote control.

Avoid tight bends or folds in the hose.

If the air conditioner is not used for prolonged periods, disconnect the pipe and plug the window unit.

V 12/21

HOW TO USE THE APPLIANCE

This appliance can be used for cooling, dehumidifying and ventilation purposes.

Before using the appliance, leave it standing erect for at least two hours.

When switching between modes, the fan continues to turn but the compressor stops: the compressor will re-start after 3

minutes. This delay protects the compressor from potential damage.

This appliance is equipped with an automatic defrosting system. When the appliance starts defrosting, the Power LED

flashes on the control panel. In cooling and dehumidification mode, the compressor stops for 10 minutes, after which the

appliance continues to operate regularly.

THE DRAINAGE TUBE MUST BE CONNECTED to the appliance AT ALL TIMES: the only exception is when the

appliance is used in dehumidification mode only, in which case the appliance should be left to discharge directly

into the room for maximum efficiency (see the “Dehumidification Mode” paragraph).

Clean the air filters under the easily removable rear grille regularly to keep the air conditioner working efficiently.

OPERATING MODES

1. COOLING MODE (COOL)

The “Cool” LED on the control panel will turn on.

The temperature can be adjusted to between 16 °C and 32 °C.

In this mode, each time the ON/OFF button is pressed the unit switches off, the appliance saves the temperature

setting and retains this setting when it is switched on again.

In this mode, the fan speed can be adjusted and the Timer and SLEEP functions can be set.

For more silent operation, run the fan at low speed.

2. DEHUMIDIFICATION MODE (DRY)



Press the MODE button to select the dehumidification mode.



The temperature is controlled by the electronic board and cannot be adjusted.



In this mode, each time the ON/OFF button is pressed the unit switches off, the appliance saves the settings and

retains them when it is switched on again.



The fan speed is set to low and cannot be adjusted.

NOTE

The air conditioner does not cool the room when operating as a dehumidifier.

When the appliance is used as a dehumidifier, the flexible pipe must not be connected.

Cooling, Fan

Dehumidifying

V 12/21

For maximum dehumidification efficiency, leave the rear discharge attachment free to discharge directly into

the environment.

The dehumidification mode is recommended during autumn and winter.

If used during summer, it is best to leave the flexible pipe attached so that the hot air is discharged towards

the outside rather than into the room.

During dehumidification, continuous drainage should be implemented (see the next chapter, “HOW TO ELIMINATE

CONDENSATE”).

3. FAN MODE (FAN)



Press the MODE button to select ventilation until the corresponding icon appears.



In this mode, the fan speed can be adjusted.



The temperature cannot be adjusted.

HOW TO ELIMINATE CONDENSATE

Manual drainage

Cooling

This appliance automatically vaporises condensate in the cooling mode.

Ensure that when the unit is operating in cooling mode, the rubber caps

closing the drainage holes on the rear of the appliance are properly

positioned.

When the air conditioner operates in cooling mode, there is no need for

continuous condensate drainage; only in specific weather conditions with very

high air humidity levels may water deposit inside the unit. When the container

is full, on display appears error code “Ft” and block the appliance’s operation.

To empty the container, switch the air conditioner off and unplug it. Remove

the cap form the rear drainage hole and direct it over a normal drain.

Ensure that the tube is not twisted or bent. The tube must slope downwards.

Re-close the drainage hole with the cap and resume use of the air conditioner.

Continuous drainage

Dehumidification

WARNING!

When using the air conditioner in dehumidification mode, it is advisable to

always arrange for continuous drainage, so as to maximise dehumidification

efficiency.

Connect one end of the PVC pipe (not provided) to the upper discharge hole

and place the other end above a drain.

This manual suits for next models

Table of contents

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual