Allen-Bradley Studio 5000 Logix Emulate Owner's manual

Programming Manual

Logix 5000 Controllers Nonvolatile Memory

Card

1756 ControlLogix, 1756 GuardLogix, 1769 CompactLogix,

1769 Compact GuardLogix, 1789 SoftLogix, 5069 CompactLogix,

5069 CompactGuardLogix, Studio 5000 Logix Emulate

Important user information

Read this document and the documents listed in the additional resources section about installation, configuration, and operation of this

equipment before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and

wiring instructions in addition to requirements of all applicable codes, laws, and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried

out by suitably trained personnel in accordance with applicable code of practice. If this equipment is used in a manner not specified by the

manufacturer, the protection provided by the equipment may be impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or

application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements

associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the

examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described

in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

WARNING: Identifies information about practices or circumstances that can cause an explosion in

a hazardous environment, which may lead to personal injury or death, property damage, or

economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal

injury or death, property damage, or economic loss. Attentions help you identify a hazard, avoid a

hazard, and recognize the consequence

Important: Identifies information that is critical for successful application and understanding of the product.

Labels may also be on or inside the equipment to provide specific precautions.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to

alert people that dangerous voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert

people that surfaces may reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control

center, to alert people to potential Arc Flash. Arc Flash will cause severe injury or death. Wear

proper Personal Protective Equipment (PPE). Follow ALL Regulatory requirements for safe work

practices and for Personal Protective Equipment (PPE).

Allen-Bradley, Rockwell Software, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Automation Publication 1756-PM017H-EN-P - February 2018 3

Summary of Changes

This manual includes new and updated information. Use these reference

tables to locate changed information.

Grammatical and editorial style changes are not included in this summary.

Global changes

This table identifies changes that apply to all information about a subject in

the manual and the reason for the change. For example, the addition of new

supported hardware, a software design change, or additional reference

material would result in changes to all of the topics that deal with that

subject.

Subject Reason

Updated screen shots. The Studio 5000 Logix Designer® interface has

been modified in versions 31 and later.

New or enhanced features

This table contains a list of topics changed in this version, the reason for the

change, and a link to the topic that contains the changed information.

Topic Name Reason

Cover Added 5069 Compact GuardLogix to the list of

supported controllers.

Controllers with Memory Card

Options on page 12 Updated the list of controller types.

Rockwell Automation Publication 1756-PM017H-EN-P - February 2018 5

Table of contents

Studio 5000 environment................................................................................ 7

Additional resources....................................................................................... 7

Legal notices................................................................................................... 8

Chapter 1

Introduction................................................................................................... 11

Controllers with Memory Card Options....................................................... 12

Prevent a Major Fault During a Load..................................................... 13

Read/Write Card Data............................................................................ 14

CompactFlash Card Formatting............................................................. 14

Secure Digital Card Formatting ............................................................. 15

Perform Firmware Updates.................................................................... 15

When to Load an Image ......................................................................... 16

Store a Project............................................................................................... 18

Load a Project............................................................................................... 21

Check for a Load .......................................................................................... 24

Clear a Memory Card ................................................................................... 25

Change the Load Image Option ............................................................. 26

Clear the Project from the Controller..................................................... 26

Store the Empty Image........................................................................... 27

Chapter 2

Introduction................................................................................................... 29

Change Which Project Loads ....................................................................... 29

Change the Load Parameters ........................................................................ 30

Other Uses for a Memory Card..................................................................... 31

Preface

Store and Load a

Project By Using a

Memory Card

Use a Memory Card

Reader

Index

Rockwell Automation Publication 1756-PM017H-EN-P - February 2018 7

Preface

This manual shows you how to access and use a memory card in Logix5000

controllers.This manual is one of a set of related manuals that show common

procedures for programming and operating Logix 5000™ controllers.

For a complete list of common procedures manuals, refer to the Logix 5000

Controllers Common Procedures Programming Manual, publication 1756-

PM001.

•The term Logix 5000 controller refers to any controller that is based on

the Logix 5000 operating system.

The Studio 5000 Automation Engineering & Design Environment®

combines engineering and design elements into a common environment. The

first element is the Studio 5000 Logix Designer® application. The Logix

Designer application is the rebranding of RSLogix 5000® software and will

continue to be the product to program Logix 5000™ controllers for discrete,

process, batch, motion, safety, and drive-based solutions.

The Studio 5000® environment is the foundation for the future of

Rockwell Automation® engineering design tools and capabilities. The Studio

5000 environment is the one place for design engineers to develop all

elements of their control system.

These documents contain additional information concerning related

Rockwell Automation products.

Resource Description

Industrial Automation Wiring and

Grounding Guidelines, publication 1770-

4.1

Provides general guidelines for

installing a Rockwell Automation

industrial system.

Product Certifications webpage,

available at

http://ab.rockwellautomation.com

Provides declarations of conformity,

certificates, and other certification

details.

Studio 5000

environment

Additional

resources

Preface

8Rockwell Automation Publication 1756-PM017H-EN-P - February 2018

You can view or download publications at

http://www.rockwellautomation.com/literature. To order paper copies of

technical documentation, contact your local Rockwell Automation distributor

or sales representative.

Reserved. Printed in USA.

This document and any accompanying Rockwell Software products are

copyrighted by Rockwell Automation Technologies, Inc. Any reproduction

and/or distribution without prior written consent from Rockwell Automation

Technologies, Inc. is strictly prohibited. Please refer to the license agreement

for details.

End User License Agreement (EULA)

You can view the Rockwell Automation End-User License Agreement

("EULA") by opening the License.rtf file located in your product's install

folder on your hard drive.

Other Licenses

The software included in this product contains copyrighted software that is

licensed under one or more open source licenses. Copies of those licenses are

included with the software. Corresponding Source code for open source

packages included in this product can be located at their respective web

site(s).

You may alternately obtain complete Corresponding Source code by

contacting Rockwell Automation via our Contact form on the Rockwell

Automation website: http://www.rockwellautomation.com/global/about-

us/contact/contact.page.

Please include "Open Source" as part of the request text.

The following open source software is used in this product:

Software Copyright License Name License Text

other contributors MIT License jQuery 2.1.1 License

Version 2.0 OpenSans License

Legal notices

Preface

Rockwell Automation Publication 1756-PM017H-EN-P - February 2018 9

Trademark Notices

Allen-Bradley, ControlBus, ControlFLASH, Compact GuardLogix, Compact

I/O, ControlLogix, CompactLogix, DCM, DH+, Data Highway Plus,

DriveLogix, DPI, DriveTools, Explorer, FactoryTalk, FactoryTalk

Administration Console, FactoryTalk Alarms and Events, FactoryTalk Batch,

FactoryTalk Directory, FactoryTalk Security, FactoryTalk Services Platform,

FactoryTalk View, FactoryTalk View SE, FLEX Ex, FlexLogix, FLEX I/O,

Guard I/O, High Performance Drive, Integrated Architecture, Kinetix,

Logix5000, Logix 5000, Logix5550, MicroLogix, DeviceNet, EtherNet/IP,

PLC-2, PLC-3, PLC-5, PanelBuilder, PowerFlex, PhaseManager, POINT

I/O, PowerFlex, Rockwell Automation, RSBizWare, Rockwell Software,

RSEmulate, Historian, RSFieldbus, RSLinx, RSLogix, RSNetWorx for

DeviceNet, RSNetWorx for EtherNet/IP, RSMACC, RSView, RSView32,

Rockwell Software Studio 5000 Automation Engineering & Design

Environment, Studio 5000 View Designer, SCANport, SLC, SoftLogix,

SMC Flex, Studio 5000, Ultra 100, Ultra 200, VersaView, WINtelligent,

XM, SequenceManager are trademarks of Rockwell Automation, Inc.

Any Rockwell Automation logo, software or hardware product not

mentioned herein is also a trademark, registered or otherwise, of Rockwell

Automation, Inc.

Other Trademarks

CmFAS Assistant, CmDongle, CodeMeter, CodeMeter Control Center, and

WIBU are trademarks of WIBU-SYSTEMS AG in the United States and/or

other countries. Microsoft is a registered trademark of Microsoft Corporation

in the United States and/or other countries. ControlNet is a trademark of

ControlNet International. DeviceNet is a trademark of the Open DeviceNet

Vendors Association (ODVA). Ethernet/IP is a trademark of ControlNet

International under license by ODVA.

All other trademarks are the property of their respective holders and are

hereby acknowledged.

Warranty

This product is warranted in accordance with the product license. The

product’s performance may be affected by system configuration, the

application being performed, operator control, maintenance, and other related

factors. Rockwell Automation is not responsible for these intervening factors.

The instructions in this document do not cover all the details or variations in

the equipment, procedure, or process described, nor do they provide

directions for meeting every possible contingency during installation,

operation, or maintenance. This product’s implementation may vary among

users.

This document is current as of the time of release of the product; however,

the accompanying software may have changed since the release. Rockwell

Automation, Inc. reserves the right to change any information contained in

Preface

10 Rockwell Automation Publication 1756-PM017H-EN-P - February 2018

this document or the software at any time without prior notice. It is your

responsibility to obtain the most current information available from Rockwell

when installing or using this product.

Environmental compliance

Rockwell Automation maintains current product environmental information

on its website at

http://www.rockwellautomation.com/rockwellautomation/about-

us/sustainability-ethics/product-environmental-compliance.page

Contact Rockwell Automation

Customer Support Telephone — 1.440.646.3434

Online Support — http://www.rockwellautomation.com/support/

Other manuals for Studio 5000 Logix Emulate

This manual suits for next models

Table of contents

Other Allen-Bradley Controllers manuals

Allen-Bradley

Allen-Bradley PLC-3 Series User manual

Allen-Bradley

Allen-Bradley Studio 5000 Logix Emulate Owner's manual

Allen-Bradley

Allen-Bradley PowerFlex 70 User manual

Allen-Bradley

Allen-Bradley SLC 500 Series User manual

Allen-Bradley

Allen-Bradley CompactLogix 1769-L23E-QB1B User manual

Allen-Bradley

Allen-Bradley iTRAK 5730 User manual

Allen-Bradley

Allen-Bradley PowerFlex 525 User manual

Allen-Bradley

Allen-Bradley controllogix 1756-L61 Owner's manual

Allen-Bradley

Allen-Bradley PowerFlex 20-750-S1 User manual

Allen-Bradley

Allen-Bradley CompactLogix 5480 User manual

Allen-Bradley

Allen-Bradley 1747-OC Series User manual

Allen-Bradley

Allen-Bradley PowerFlex 750 Series User manual

Allen-Bradley

Allen-Bradley 2080-IQ4 User manual

Allen-Bradley

Allen-Bradley PowerFlex400 User manual

Allen-Bradley

Allen-Bradley SoftLogix 5800 User manual

Allen-Bradley

Allen-Bradley PowerFlex 700S User manual

Allen-Bradley

Allen-Bradley CompactLogix 5380 User manual

Allen-Bradley

Allen-Bradley PLC-5 series User manual

Allen-Bradley

Allen-Bradley PowerFlex 70 User manual

Allen-Bradley

Allen-Bradley 1769-L30ERM User manual

Allen-Bradley

Allen-Bradley ProcessLogix 1757-PLX52 User manual

Allen-Bradley

Allen-Bradley 1756-CN2/B User manual

Allen-Bradley

Allen-Bradley PowerFlex 400 Operator's manual

Allen-Bradley

Allen-Bradley ControlLogix 5570 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual