ADT Safewatch Quick Connect Plus User manual

For a detailed review of the entire system, please view the Safewatch Quick Connect Plus system manual.

Arm and Disarm

Arm:

To arm all sensors in STAY mode when you are not leaving the premises, enter your [security code] +

[STAY] or press and hold [STAY].

To arm all sensors in AWAY mode when you are leaving the premises, enter your [security code] +

[AWAY] or press and hold [AWAY].

Disarm:

To disarm, enter your [security code] + [OFF].

Battery

The Safewatch Quick Connect operates on the 7.2V Battery Pack.

Quick Guide: Safewatch Quick Connect Plus

Loss of AC power and use of backup battery power is indicated by No AC.

A low battery condition is indicated by Low Bat.

For instructions on replacing your battery, please visit our Battery Replacement Page.

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, enter your [security code] + [BYPASS] + [2-digit zone number].

To unbypass a zone, enter your [security code] + [OFF].

Change Time and Date

Enter your [Master code] + [FUNCTION] + [6] + [3].

When ‘SET TIME’ appears, enter the 2-digit hour, i.e., 18 for 6:00.

Press [ADD] and choose [1] for PM or [0] for AM, then press [ADD] again.

Enter the 2-digit minute, i.e., 14 for 6:14, then press [ADD].

Enter the 2-digit month, i.e., 03 for March, then press [ADD].

Enter the 2-digit day, i.e., 23 for March, 23, then press [ADD].

Enter the 2-digit year, i.e., 15 for March 23, 2015, then press ‘ADD] to accept the entry and exit Clock-

Setting mode. The keypad will beep 4 times in confirmation.

Chimes and Beeps

When your system is in chime mode, a chime will sound three beeps whenever a protected door/window is

opened.

To turn the door chime function on and off, press [FUNCTION] + [CHIME].

Reset

To clear the display after an alarm event, enter your [security code] + [OFF] to clear the alarm event history.

Security Codes

You can program up to 6 additional user codes.

To add a user, enter the [Master code] + [CODE] + [new user number] + [new user code].

To erase a user, enter the [Master code] + [CODE] + [user number] and wait approximately three

seconds for the keypad to beep and verify.

Some user numbers have already been programmed:

Pre-programmed User

Function

User Number

Installer

All functions

[1]

Master

All functions

[2]

Babysitter

Only arm the system.

[7]

Duress

Secretly notifies the

monitoring center of duress.

[8]

For a complete list of User Code Attributes, please see the Safewatch Quick Connect Plus system manual.

Trouble Conditions

When a trouble condition is detected, the word ‘FAULT’ will be displayed on the panel.

The existing Trouble Condition keyword will appear on the display.

To silence the Trouble Condition beeps, enter your [security code] + [OFF].

For a list of possible Trouble Conditions, please see the Safewatch Quick Connect Plus system manual.

Volume

System announcements and status beep volume can be adjusted.

To adjust the volume level, press [FUNCTION] + [VOLUME] + [3]/[6].

[3] increases the volume by one level and [6] decreases the volume by one level.

To mute the volume level, press [FUNCTION] + [VOLUME] + [OFF].

Table of contents

Other ADT Security System manuals

ADT

ADT Fall Detection Pendant User manual

ADT

ADT Security System 4112 User manual

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... User manual

ADT

ADT TSSC Assembly instructions

ADT

ADT DSC 9047 User manual

ADT

ADT Galaxy 8 User manual

ADT

ADT Safewatch Pro 3000 User guide

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... User manual

ADT

ADT FOCUS CADET User manual

ADT

ADT Ademco Vista 20 User manual

ADT

ADT Smart Home PM360-R User manual

ADT

ADT SAFEWATCH PRO User manual

ADT

ADT Safewatch Plus Enterpreneur Security Systems User manual

ADT

ADT L5000 Lynx Use and care manual

ADT

ADT BHS-4000A User manual

ADT

ADT PremisePro none User manual

ADT

ADT ACCORD XPC User manual

ADT

ADT Safewatch QuickConnect Plus User manual

ADT

ADT Smart Home PM360 User manual

ADT

ADT ADTHYBWL Series User manual

ADT

ADT EZ Installation and operating instructions

ADT

ADT Security System D7412 User manual

ADT

ADT Safewatch User manual

ADT

ADT Safewatch Pro 2000 User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual