ADLINK Technology M-302 User manual
Advance Technologies; Automate the World.
Manual Rev.: 2.01
Revision Date: July 30, 2012
Part No: 50-13062-1010
M-302
ATX Industrial Motherboard with
Intel® Q965 Chipset
User’s Manual
Revision History
Revision Release Date Description of Change(s)
2.00 2009/09/08 Initial Release
2.01 2012/07/30
Correct CPU Fan Connector pin definition;
remove CHA_FAN1; add WDT sample code;
update audio codec for boards with ordering
numbers ending in “0070” and higher; update
CPU support.
Preface iii
M-302
Preface
Copyright 2009-12 ADLINK Technology Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global
environmental preservation through compliance with the Euro-
pean Union's Restriction of Hazardous Substances (RoHS) direc-
tive and Waste Electrical and Electronic Equipment (WEEE)
directive. Environmental protection is a top priority for ADLINK.
We have enforced measures to ensure that our products, manu-
facturing processes, components, and raw materials have as little
impact on the environment as possible. When products are at their
end of life, our customers are encouraged to dispose of them in
accordance with the product disposal and/or recovery programs
prescribed by their nation or company.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.
iv Preface
Using this Manual
Audience and Scope
The M-302 User’s Manual is intended for hardware technicians
and systems operators with knowledge of installing, configuring
and operating industrial grade computers.
Manual Organization
This manual is organized as follows:
Preface: Presents copyright notifications, disclaimers, trade-
marks, and associated information on the proper usage of this
document and its associated product(s).
Chapter 1, Introduction: Introduces the M-302, its features,
applications, and specifications, including functional descriptions
and board layout.
Chapter 2, Connectors & Jumpers: Provides technical informa-
tion on connectors, jumpers and pin assignments for configuring
the M-302.
Chapter 3, Getting Started: Describes how to install components
and drivers on the M-302.
Chapter 4, BIOS Setup: Presents information and illustrations to
help understand and configure the system BIOS.
Appendix B, System Resources: Presents information on I/O
mapping, IRQ routing, and resource allocation.
Important Safety Instructions: Presents safety instructions all
users must follow for the proper setup, installation and usage of
equipment and/or software.
Getting Service: Contact information for ADLINK’s worldwide
offices.
Preface v
M-302
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.
vi Preface
This page intentionally left blank.
Table of Contents vii
M-302
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Figures........................................................................ ix
List of Tables.......................................................................... xi
1 Introduction ........................................................................ 1
1.1 Package Contents ............................................................... 1
1.2 Overview.............................................................................. 2
1.3 Features............................................................................... 2
1.4 Specifications....................................................................... 3
1.5 Power Consumption ............................................................ 5
1.6 Block Diagram ..................................................................... 7
1.7 Functional Description ......................................................... 8
1.8 Board Layout ..................................................................... 11
1.9 Mechanical Drawing .......................................................... 13
2 Connectors & Jumpers.................................................... 15
2.1 Rear I/O Connectors.......................................................... 15
2.2 Onboard Connectors ......................................................... 19
2.3 Jumpers............................................................................. 28
3 Getting Started ................................................................. 29
3.1 Installing the CPU.............................................................. 29
3.2 System Memory................................................................. 33
3.3 Driver Installation............................................................... 35
4 BIOS Setup........................................................................ 37
4.1 Starting the BIOS............................................................... 37
4.2 Standard CMOS Features................................................. 39
viii Table of Contents
4.3 Advanced BIOS Features.................................................. 43
4.4 Advanced Chipset Features............................................... 48
4.5 Integrated Peripherals........................................................ 50
4.6 Power Management Setup ................................................ 55
4.7 PnP/PCI Configurations..................................................... 58
4.8 Frequency/Voltage Control................................................ 60
4.9 Load Fail-Safe Defaults ..................................................... 61
4.10 Load Optimized Defaults.................................................... 62
4.11 Set Supervisor & User Password....................................... 63
4.12 Save & Exit Setup.............................................................. 64
4.13 Exit Without Saving............................................................ 65
5 POST Codes...................................................................... 67
A Appendix: Watchdog Timer..............................................73
A.1 Sample Code..................................................................... 73
B Appendix: System Resources..........................................75
B.1 System Memory Map......................................................... 75
B.2 Direct Memory Access Channels....................................... 76
B.3 Fixed I/O Map .................................................................... 77
B.4 Variable I/O Map................................................................ 78
B.5 Interrupt Request (IRQ) Lines............................................ 79
B.6 PCI Configuration Space Map ........................................... 82
B.7 PCI Interrupt Routing Map................................................. 84
Important Safety Instructions............................................... 85
Getting Service...................................................................... 87
List of Figures ix
M-302
List of Figures
Figure 1-1: M-302 Block Diagram......................................................7
Figure 1-2: M-302 Board Layout......................................................11
Figure 1-3: M-302 Rear I/O Layout..................................................12
Figure 1-4: M-302 Board Dimensions..............................................13
xListofFigures
This page intentionally left blank.
Table of contents
Other ADLINK Technology Motherboard manuals
ADLINK Technology
ADLINK Technology NuPRO-842 Series User manual
ADLINK Technology
ADLINK Technology CoreModule 430 User manual
ADLINK Technology
ADLINK Technology LEC-iMX6 Use and care manual
ADLINK Technology
ADLINK Technology cPCI-6620 Series User manual
ADLINK Technology
ADLINK Technology cPCI-6810 User manual
ADLINK Technology
ADLINK Technology IMB-M45 User manual
ADLINK Technology
ADLINK Technology AmITX-HL-G User manual
ADLINK Technology
ADLINK Technology IMB-M46 User manual
ADLINK Technology
ADLINK Technology cPCI-6860A Series User manual
ADLINK Technology
ADLINK Technology MI-220 User manual
ADLINK Technology
ADLINK Technology MIX-220 User manual
ADLINK Technology
ADLINK Technology CoreModule 920 User manual
ADLINK Technology
ADLINK Technology AmITX-BT-I User manual
ADLINK Technology
ADLINK Technology com express User manual
ADLINK Technology
ADLINK Technology IMB-M47 User manual
ADLINK Technology
ADLINK Technology NuPRO-935A User manual
ADLINK Technology
ADLINK Technology MI-220 User manual
ADLINK Technology
ADLINK Technology ETX Series User manual
ADLINK Technology
ADLINK Technology ReadyBoard 910 User manual
ADLINK Technology
ADLINK Technology AmITX-RZ-G User manual
