Acer V12LC Installation and operating instructions
Addendum
V12LC System User’s Guide PART NO. 49.56701.001
Note the following changes to the V12LC System User’s Guide.
Page 1-1 and 1-2
•The system board supports Pentium CPUs running at 75, 90,
100, 120, and 133 MHz.
Page 1-3
•Jumpers JP7 and JP9 do not appear on the system board
anymore.
•Item #13 on the system board layout should read “Multifunction
connectors”.
Page 1-11 and 1-12
•Jumpers JP7 and JP9 are deleted from the system board.
•Delete JP7 and JP9 from the jumper settings table.
Page 2-12 and 2-14
•The items “Memory at 15MB-16MB Reserved for” and “System
Memory Parity” in the Advanced Configuration screen are
switched.
Page 2-21
•The parallel port settings should have their respective IRQ
assignments as follows: 3BCh (IRQ 7), 378h (IRQ 7), and
278h (IRQ 5).
Page 2-21
•The default value of item 1F0h-1FFh on page 2 of the Non-PnP
ISA Card Configuration screen should appear as [---].
•The Non-PnP ISA Card Configuration screen page 3 is deleted.
PART NO. 49.43801.001 PI16 User’s Guide
Other manuals for V12LC
1
Table of contents
Other Acer Motherboard manuals
Acer
Acer V70MA Installation instructions
Acer
Acer Altos 9100 Series User manual
Acer
Acer Altos 12000 Series User manual
Acer
Acer V66LT User manual
Acer
Acer Veriton 9100 User manual
Acer
Acer AcerPower Flex4000 Series User manual
Acer
Acer Ferrari 1100 Series User manual
Acer
Acer Aspire M5640 Manual
Acer
Acer V60N User manual
Acer
Acer M9D User manual
