Aaeon EMB-BT1 User manual

Industrial Motherboard

EMB-BT1

E9987

Revised Edition V4

January 2016

This document is copyrighted, 2016. All rights are reserved. The original

manufacturer reserves the right to make improvements to the products described

in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use,

or for any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to

change without notice. While reasonable efforts have been made in the preparation

of this document to assure its accuracy, the original manufacturer assumes no

liabilities resulting from errors or omissions in this document, or from the use of the

information contained herein.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

Acknowledgments

All other products’ name or trademarks are properties of their respective owners.

• AMI is a trademark of American Megatrends Inc.

• Intel®, Core™ are trademarks of Intel® Corporation.

• Microsoft Windows®is a registered trademark of Microsoft Corp.

• IBM, PC/AT, PS/2, and VGA are trademarks of International Business

Machines Corporation.

The original manufacturer reserves the right to make changes in the product

design without notice to its users.

All other product names or trademarks are properties of their respective owners.

iii

Contents

Chapter 1: Product overview

1.1 Package contents......................................................................... 1-1

1.2 Features ........................................................................................ 1-1

1.3 Specifications............................................................................... 1-2

Chapter 2: Motherboard information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard layout...................................................................... 2-2

2.3 Screw size..................................................................................... 2-4

2.3.1 Component side.............................................................. 2-4

2.3.2 Solder side ...................................................................... 2-5

2.4 Central Processing Unit (CPU) ................................................... 2-6

2.5 System memory ........................................................................... 2-6

2.5.1 Installing a DIMM ............................................................ 2-7

2.6 Jumpers ........................................................................................ 2-8

2.7 Onboard LEDs ............................................................................ 2-11

2.8 Connectors ................................................................................. 2-12

2.8.1 Rear panel connectors.................................................. 2-12

2.8.2 Internal connectors ....................................................... 2-14

Chapter 3: BIOS setup

3.1 BIOS setup.................................................................................... 3-1

3.1.1 Menu bar......................................................................... 3-2

3.2 Main menu .................................................................................... 3-2

3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2

3.2.2 System Time [HH:MM:SS] .............................................. 3-2

3.3 Advanced menu ........................................................................... 3-3

3.3.1 Power Management........................................................ 3-3

3.3.2 CPUConguration .......................................................... 3-4

3.3.3 SuperIOConguration ................................................... 3-4

3.3.4 Dynamic Digital IO .......................................................... 3-5

3.3.5 Trusting Computing......................................................... 3-5

3.3.6 USBConguration .......................................................... 3-5

3.3.7 Hardware Monitor ........................................................... 3-6

3.3.8 IDEConguration............................................................ 3-7

3.4 Chipset menu ............................................................................... 3-8

3.4.1 NorthBridgeConguration ............................................. 3-8

3.4.2 SouthBridgeConguration............................................. 3-8

3.5 Security menu .............................................................................. 3-9

3.5.1 Administrator Password .................................................. 3-9

3.5.2 User Password................................................................ 3-9

3.6 Boot menu .................................................................................. 3-10

BootConguration ....................................................................... 3-10

3.7 Save & Exit menu....................................................................... 3-11

Appendix

Notices.......................................................................................................A-1

Contents

1-1

Chapter 1: General information

1.1 Package contents

Check your industrial motherboard package for the following items.

1 x Industrial Motherboard

1 x SATA Cable

1 x I/O Shield

1 x Support CD

1 x SATA power cable

If any of the above items is damaged or missing, contact your distributor or

sales representative immediately.

1.2 Features

• Intel®J1900 / N2807 / E3845 / E3825

• Two DDR3L SO-DIMMs for J1900/E3845

• One DDR3L SO-DIMM for N2807/E3825

• SATA 6.0 Gb/s x 2, SATA 3.0 Gb/s x 2 (1 colay with mSATA), USB3.0 x 1,

USB2.0 x 7

• PCI-Express x 1, Full-size Mini Card (mSATA) (SIM card slot & PCIe optional)

x 1, Half-size Mini Card (PCIe + USB) x 1

• VGA, HDMI, 18/24-bit Dual Channel LVDS support

Chapter 1

Product overview

EMB-BT1

1-2

1.3 Specifications

SYSTEM

Form factor

Mini-ITX

CPU

Intel® J1900 Bay Trail-D (4C @ 2GHz CPU, 10W TDP)

Intel® E3845 Bay Trail-I (4C @ 1.91GHz CPU, 10W TDP)

Intel® E3825 Bay Trail-I (2C @ 1.33GHz CPU, 6W TDP)

Intel® N2807 Bay Trail-I (2C @ 1.58GHz CPU, 4.5W TDP)

Memory

DDR3L 1333 MHz SO-DIMM x 2 up to 8GB (J1900 / E3845)

DDR3L 1333 MHz SO-DIMM x 1 up to 4GB (N2807)

DDR3L 1067 MHz SO-DIMM x 1 up to 8GB (E3825)

Non-ECC, unbuffered memory, dual-channel memory architecture

attype

I/O Chipset

Fintek F81866D

Ethernet

2 x Realtek PCIe Gb LAN 8111G

BIOS

64Mbit Flash AMI BIOS ROM

Wake on LAN

Yes (WOL/PXE)

Watchdog Timer

1~255 steps by software program

H/W Monitor

Temperature Monitor on CPU/System

Voltage Monitor on Vcore/5V/3.3V/12V

Fan Monitor on CPU/Chassis

Smart Fan Control

Chassis Fan (fanless)

Power State

S3, S4, S5

Expansion slot 1 x PCIe [x1]

1 x Mini Card (mSATA) Full-size (SIM card slot & PCIe optional)

1 x Mini Card (PCIe + USB) Half size

TPM

InneonSLB9635TT1.2(optional)

Battery

Lithium battery

Power requirement

12V DC

Board size

6.7 in. x 6.7 in. (17.0 cm x 17.0 cm)

Gross weight

1.1 lb (0.5 Kg)

Operating

temperature

32oF~140oF (0oC~60oC)

Storage temperature

-40oF~185oF (-40oC~85oC)

Operating humidity

0%~90% relative humidity, non-condensing

Power compliance

Compliant with Eup/ErP

Certificate

CE/FCC

(continued on the next page)

1-3

Chapter 1: General information

DISPLAY

Chipset

Intel® HD Graphics

Resolution

Up to 1920x1200@60Hz for VGA

Up to 1920x1200@60Hz for HDMI

Up to 1920x1080@60Hz, Dual Channel 18/24-bit LVDS

Output interface

1 x LVDS

1 x VGA

1 x HDMI

I/O

Storage

2 x SATA 6.0Gb/s ports

2 x SATA 3.0Gb/s ports (1 colay with mSATA)

1 x SATA power connector

Serial port

1 x RS-232/422/485 supports 5V/12V/RI option (COM1 for box

header)

5 x RS-232 (COM2 on rear I/O, COM3-COM6 for box header)

USB

1 x USB3.0 (1 port at rear panel)

7 x USB2.0 (2 ports at rear panel, 5 ports at mid-board)

Fan

1 x Chassis Fan connector (4-pin)

RTC

Internal RTC

Keyboard/Mouse

1 x PS/2 Keyboard / mouse port

Audio

Mic-in

Line-out

Ethernet

2 x RJ-45 ports on rear I/O

Display

1 x VGA port on rear I/O

1 x HDMI port on rear I/O

1 x LVDS port on rear I/O

Others

1 x 8-bit Programmable Digital I/O

1 x Front panel connector

1 x AT/ATX mode select jumper (optional)

EMB-BT1

1-4

2-1

Chapter 2: Motherboard information

Chapter 2

Motherboard information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

CAUTION!

• Unplugthepowercordfromthewallsocketbeforetouchingany

component.

• Beforehandlingcomponents,useagroundedwriststraportouchasafely

groundedobjectorametalobject,suchasthepowersupplycase,toavoid

damaging them due to static electricity.

• HoldcomponentsbytheedgestoavoidtouchingtheICsonthem.

• Wheneveryouuninstallanycomponent,placeitonagroundedantistatic

pad or in the bag that came with the component.

• Beforeyouinstallorremoveanycomponent,ensurethattheATXpower

supply is switched off or the power cord is detached from the power

supply.Failuretodosomaycauseseveredamagetothemotherboard,

peripherals,orcomponents.

EMB-BT1

2-2

EATX_PWR1

ALC

887

AAFP1 LVDS1

Super

I/O

MINI_CARD1

CLRTC1

17.0cm(6.7in)

DDR3_DIMM_A1 (64bit, 240-pin module)

DDR3_DIMM_B1 (64bit, 240-pin module)

DC_PWR1

USBHUB_12

USB3_1

AUDIO1

LAN1

LAN2

HDMI1

F_PANEL

LED1

LED2

BZ1

USBHUB_56

USBHUB_7

USBHUB_34 CHA_FAN1

SIM1

SATA_PWR1

SATA3G_1 SATA6G_1

SATA3G_2

SATA6G_2

COM5COM6

COM3

COM1

COM4

SPI1

64Mb

BIOS

APU

PCIEX1_1

INV1

CHRONTEL

CH7511

ASM

1442

RTL

8111G

RTL

8111G

VGA1

COM2

ASM

1661

MINI_CARD2

LPT1

KBMS1

BATTERY1

651 2

19 17 15182021

2.2 Motherboard layout

Place this side

towards the rear

of the chassis

NOTE: Place four screws into the holes indicated by circles to secure the

motherboard to the chassis.

CAUTION!Donotovertightenthescrews!Doingsocandamagethe

motherboard.

Other manuals for EMB-BT1

Table of contents

Popular Motherboard manuals by other brands

DFI

DFI SD170 user manual

ASROCK

ASROCK ROMED8-2T user manual

Asus

Asus P2L97A user manual

Winmate

Winmate IC70 user manual

Asus

Asus MES-B user manual

Grantech

Grantech SYS8F377VGGA-3OMN user manual

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR user guide

Gigabyte

Gigabyte GA-9IVDT user manual

Texas Instruments

Texas Instruments ADS8372EVM user guide

Commell

Commell MS-C73 user manual

IBT Technologies

IBT Technologies MB860 user manual

Nvidia

Nvidia TEGRA DG-04927-001_V01 user guide

Biostar

Biostar M7VIT Bravo Description

Intel

Intel D33217CK specification

Asus

Asus F1A55-M LX PLUS R2.0 user manual

EPC

EPC EPC9147C quick start guide

Asus

Asus EX-B760M-V5 D4 quick start guide

EPOX

EPOX MU-8KHA0010 user manual