3idee Smsng-s32bm User manual

www.3idee.eu

smsng-s32bm VESA Adapter

Assembly instructions

The VESA adapter is compatible with the following Samsung M8 Smart Monitors

series products (samsung.com):

LS32BM801UNXGO

LS32BM80GUNXGO

LS32BM801UMXZN

LS32BM801UCXXK

LS32BM801UEXXS

LS32BM80PUNXGO

LS32BM80PUWXXL

LS32BM801UUXXU

LS32BM801UUXEN

LS32BM801UNXGO

With the VESA adapter you can easily mount your SAMSUNG brand monitor to a

monitor arm with VESA hole pattern (75 x 75mm). Use the included screws and

nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws

and dowels (not included).

2

Assembly instructions

Assembly instruction

Step 1

First, remove the base of your Samsung monitor. To do this, loosen the screw under the monitor base.

(Figure 1)

Please make sure you have a soft surface when storing the monitor for disassembly /

assembly.

Step 2

Place the supplied loose sheet into the monitor receptacle as

shown. (Figure 1)

Figure 1

Step 3

This is how the plate should be in the monitor mount. (Figure

2)

Figure 2

Step 4

Now slide the sheet down as shown in the illustration.

(Figure 3)

Figure 3

Step 5

Now take the VESA adapter and insert it into the monitor

mount of your Samsung monitor as shown. (Figure 4)

Figure 4

3Assembly instructions

Step 6

This is how the correctly placed VESA adapter should look.

(Figure 5)

Figure 5

Step 7

Now slide the VESA adapter upwards as shown. (Figure 6)

Figure 6

Step 8

Now take the single screw that was in the plastic bag with

the sheet metal and screw it in as shown.

(Figure 7)

Figure 7

Step 9

Please check that you have tightened the screw and that the

assembly has been done as shown. (Figure 8)

Figure 8

4

Assembly instructions

Step 10

For this step we recommend the help of a 2nd person.

Now the monitor + VESA adapter can be screwed to your

VESA arm. (Figure 9)

Please use the 4 screws included in the delivery.

Figure 9

Step 11

Please make sure that all 4 screws are tight. (Figure 10)

Figure 10

5Assembly instructions

Safety instructions

General notes

Make sure that all screws are tight and that the monitor audibly clicks into place during installation (if

available).

The material of the adapter is not heat resistant. Avoid direct heat around the adapter such as PC

exhaust or direct sunlight in summer.

PLA is UV resistant but not suitable for high temperatures.

Avoid jerky movements (pulling, tearing) on the PC monitor. This can affect the performance of the

VESA adapter.

Do not subject the PC monitor to excessive loads such as leaning or pushing. This can impair the

performance of the VESA adapter.

Material Notes

The adapter is made of high-quality polylactide (PLA) plastic. PLA is both a colorfast and UV-resistant

material and has low flammability. Polylactide has a low temperature resistance of approx. 45°C-55°C

and is therefore not suitable for use in the vicinity of direct heat and heat sources.

We wish you a lot of fun with your product.

Your 3idee Team

Responsible for this content:

3idee Technologies S.à r.l

5, ZA Um Lenster Bierg

L-6125 Junglinster

Luxembourg

Powered by TCPDF (www.tcpdf.org)

Table of contents

Popular Adapter manuals by other brands

PCB Piezotronics

PCB Piezotronics 090B274 Installation and operating manual

Auvidea

Auvidea J20 Technical reference manual

Gossen MetraWatt

Gossen MetraWatt AT3-III E operating instructions

Akribis

Akribis ITF-21-BISS-MIT user manual

Tenda

Tenda W54U user guide

ROHO

ROHO AGILITY Operation manual

PROLiNK

PROLiNK WN2001 Quick installation guide

Hawking

Hawking HUF2 Specifications

Airlink101

Airlink101 AWLC4030 user manual

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter user manual

Philips

Philips SWA4554S/10 user manual

JVC

JVC TS-C9D2B Assembly and installation instructions

NETGEAR

NETGEAR A6100 quick start

D-Link

D-Link DWA-121 Quick install guide

Philips

Philips SWA2037 Specifications

Basalte

Basalte 0610-20 installation manual

Yealink

Yealink EHS40 user guide

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A installation guide