ZKTeco L4000 User manual

Table of contents

Popular Door Lock manuals by other brands

Assa Abloy

Assa Abloy effeff 827A-IP Mounting instructions

We.lock

We.lock SECBNEBL51 instructions

Iseo

Iseo MA1A installation guide

ID Lock

ID Lock 150 user manual

Lockly

Lockly ACCESS TOUCH PRO user manual

iLoq

iLoq G50S user guide

SDC

SDC Z7835 installation instructions

ilco

ilco 452 Installation

Samsung

Samsung shs-h705 user guide

TRU-BOLT

TRU-BOLT 08102017 user manual

CDVI

CDVI 500-LADJ quick start guide

Igloohome

Igloohome Deadbolt 2S Metal Grey Installer/user guide

eSSL

eSSL FL-300 user manual

JAKO

JAKO JKBTNX4 installation guide

Dorma

Dorma MUNDUS PREMIUM GK 50 Mounting instruction

SCOOP

SCOOP Pullbloc 4.1 FS Panik Assembly instruction

Yale

Yale MORTISE 8800 SERIES installation instructions

Siegenia

Siegenia KFV AS3500 Assembly instructions

Installation Instruction

Version: 1.0

Date: Dec.,2014

L4000

B

A

C

D

E

H

F

GIJ

C

K

D

L

M

N

O

P

Q

Diagram

Before Installation

1

A

IJ

M

B

F

CK

E

G

D

50mm

LN

Q

30mm 40mm

Mounting Hardware Package

35-50mm door thickness

20mm

8mm

PackingList

Mounting Hardware Package

50-65mm door thickness

D

70mm

LN

45mm 55mm

H

70mm

2

1. Check door thickness, prepare the mounting hardware package and

cylinder.

Door Preparation

Door Thickness

(mm)

D Spindle Length

(mm)

N Screw Length

(mm)

L Screw Length

(mm)

Q Screw Length

(mm)

E Cylinder Length

(mm)

35-50 50 40 30 8 40

50-65 70 55 45 8 50

65-80 70 70 60 8 60

Note 1: The standard lock includes 2 mounting hardware package only, which is used for the door thickness

of 35-50mm and 50-65 mm separately.

Note 2: 40mm cylinder is recommended for the door thickness of 35-50mm. But, it can be used in the door

thickness of 50 -65 mm if the mortise is not placed along the centerline of door side.

3

3

I

I

I

I

FF

FF

2. Check door open direction.

Note 1: Mortise (F) has 2 types: one is for left open, the other is for right open. Please use the correct one.

Note 2: Strike plate (I) has 2 types: one is for inward open, the other is for outward open. Please use the

correct one.

Left inward Right inward

Left outward Right outward

Tips

1. How to change the handle direction?

Press down the component pointed by the arrow.

At the same time, rotate the handle at 180°.

Then release your hand from the pressed component.

180°

Pressdown

thecomponent

4

2.How to use mechanical key ?

A

3. How to use emergency

power?

Cautions

1. New lock is defined as always open mode.

2. Please register administrator firstly to prevent from any illegal access.

3. The lock is equipped with mechanical keys for manual unlocking. Remove mechanical keys from the

package and keep them in a safe place.

4. To power on the lock, four alkaline AA batteries (not included) are required. Non-alkaline and

rechargeable batteries ARE NOT RECOMMENDED.

5. Do not remove batteries when the lock is in working state.

6. The operation of setting lock has a stand-by time limit of 10 seconds. Without any activity, lock will shut

off after 15 seconds.

7. Keep your fingers clean when using this lock.

Remove the cover on the key

hole with screwdriver or nails.

Insert the key into key hole

and rotate 90°.

5

G

G

F

center line of the

handle

desired handle

height

Installation

door thickness

35~80mm

55mm

2. Install the mortise(F).

1. Drill holes on the door.

Note 1: Align the template along the vertical

center line of the mortise (F) at the desired

handle height, and tape it to door.

Note 2: Mark the holes first, then start drilling.

Backset

6

3.Install lock cylinder(E).

H

E

H

Note: Install lock cylinder in right direction,

then tighten screw (H) to fix it.

4.Install spindle(D).

D

Note: Ensure the red dot have to be vertically

upward.

D

7

5.Install outdoor unit(B) with gasket(C).

B

C

8

L

B

C

K

KC

L

6. Install mounting plate (K) with

gasket (C) on the door.

7. Install spindle (D) on the door.

D

9