ZKTeco HBL100 User manual

Installation Guide

HBL100/HBL200 (Double Latch)

Version: 1.0

Date:June2019

What’s in the Box..........................................................................................1

Installation Diagram...................................................................................2

Installation Preparation..............................................................................3

Installation Steps.........................................................................................4

Change Handle Direction.........................................................................11

Important Notes

Contents

vPlease read all instruction in this manual or call customer care before returning the product to the store.

vThe contents of this guide may vary without any notices to improve the performance of this product.

vCustomer's improper installation may result in a additional service costs. We highly recommend

professional installation.

30-37mm 38-45mm 46-53mm 54-60mm

Spindle

Screw A

Screw B

Screw C 40mm

Note: To ensure proper functioning of the lock, use the correct set of screws and spindle according

to your door thickness.

8mm

64mm 72mm 80mm 88mm

What’s in the Box

Door Thickness

Outdoor unit Indoor unit

Keys

Hex wrench

Latch

Strike

plate Strike

box

GasketMounting

plate Lithium Battety

Installation Diagram

Keys

Outdoor unit

Gasket

Latch

Screw A

Strike

plate

Strike

box

Gasket

Mounting

plate

Screw C

Spindle

Indoor unit

Screw B

Door

Battery Cover

Lithium battery

Cover

Left inward Right inward

Left outward Right outward

Standpoint

Latch

Strikeplate Latch

Strikeplate

Latch

Strikeplate

Installation Preparation

2. Check door opening direction.

The handle of the door is determined by the swing (handing) direction of the door. Below is the graphical

representation of handing in reference to your location outside the room.

1. Check door thickness.

After measuring the door thickness, select the proper spindle and screw length. For details, please refer to

the table contents of page 1.

center line of handle

RecommendedInstallationHeight 1. Drilling holes in the door.

1) Paste the installation template at a desired handle

height.

2) Mark the holes and start drilling the holes.

Installation Steps

If the user height is 1.6-1.8m, the height

from handle centerline to ground is 1m.

1.0m

0.5m

desired handle height

30~60mm

60mm

Secure the latch by inserting the screws A.

Change latch direction. (if needed)

1. Push the reversing block down.

2. Push the latch bolt into mortise.

3. Rotate the latch bolt at 180° inside

mortise, then loose it.

Screws A

2. Installing the latch.

1. Attach the gasket to the outdoor unit.

2. Insert spindle into the clutch.

Route cable and attach the outdoor unit to the door

by inserting it through the drilled holes.

Clutch c orrect p osition:

T he triangle must be vertically centered.

3. Installing outdoor unit on the door.

Attach the mounting plate to the gasket and route

the cable through the hole on the mounting plate

and gasket.

Place the gasket and mounting plate on to

the door and use screws C to secure them.

Screws C

4. Installing mounting plate with gasket on the door.

Connect the cable connector to the port on indoor unit. Place the indoor unit properly on the

mounting plate. Then use screw B to

secure indoor unit.

Screws B

5. Installing the indoor unit.

This manual suits for next models

Table of contents

Popular Door Lock manuals by other brands

Assa Abloy

Assa Abloy effeff 827A-IP Mounting instructions

We.lock

We.lock SECBNEBL51 instructions

Iseo

Iseo MA1A installation guide

ID Lock

ID Lock 150 user manual

Lockly

Lockly ACCESS TOUCH PRO user manual

iLoq

iLoq G50S user guide

SDC

SDC Z7835 installation instructions

ilco

ilco 452 Installation

Samsung

Samsung shs-h705 user guide

TRU-BOLT

TRU-BOLT 08102017 user manual

CDVI

CDVI 500-LADJ quick start guide

Igloohome

Igloohome Deadbolt 2S Metal Grey Installer/user guide

eSSL

eSSL FL-300 user manual

JAKO

JAKO JKBTNX4 installation guide

Dorma

Dorma MUNDUS PREMIUM GK 50 Mounting instruction

SCOOP

SCOOP Pullbloc 4.1 FS Panik Assembly instruction

Yale

Yale MORTISE 8800 SERIES installation instructions

Siegenia

Siegenia KFV AS3500 Assembly instructions