YASKAWA MOTOMAN FS100 User manual

Part Number: 174512-1CD

Revision: 0

MANUAL NO.

HW1483164

FS100 OPTIONS

INSTRUCTIONS

FOR CONVEYOR COORDINATED FUNCTION

• Upon receipt of the product and prior to initial operation, read these instructions thoroughly, and retain

for future reference.

• This instruction is applicable to both FS100 and FS100L controllers.

MOTOMAN INSTRUCTIONS

(FOR SMALL -SIZED MANIPULATORS)

MOTOMAN- INSTRUCTIONS

FS100 INSTRUCTIONS

FS100 OPERATOR’S MANUAL

FS100 MAINTENANCE MANUAL

(FOR LARGE AND MEDIUM-SIZED MANIPULATORS)

MOTOMAN- INSTRUCTIONS

FS100L INSTRUCTIONS

FS100LOPERATOR’S MANUAL

FS100L MAINTENANCE MANUAL

The FS100 OPERATOR’S MANUAL above is applicable to both FS100 and FS100L controllers.

1 of 28

174512-1CD

HW1483164

Conveyor Coordinated

Function

customers to assist in the operation of Motoman robots, related equipment

and software This manual is copyrighted property of Yaskawa and may

not be sold or redistributed in any way. You are welcome to copy this

document to your computer or mobile device for easy access but you may

not copy the PDF files to another website, blog, cloud storage site or any

other means of storing or distributing online content.

Printed in the United States of America

First Printing, 2015

Yaskawa America, Inc.

Motoman Robotics Division

100 Automation Way

Miamisburg, OH 45342

Phone: 937-847-6200

www.motoman.com

2 of 28

iii

174512-1CD

HW1483164

Conveyor Coordinated

Function

MANDATORY

• This manual explains the conveyor coordinated function of the

FS100. Read this manual carefully and be sure to understand its

contents before handling the FS100.

• General items related to safety are listed in Chapter 1: Safety of the

FS100 Instructions. To ensure correct and safe operation, carefully

read the FS100 Instructions before reading this manual.

CAUTION

• Some drawings in this manual are shown with the protective covers

or shields removed for clarity. Be sure all covers and shields are

replaced before operating this product.

• The drawings and photos in this manual are representative

examples and differences may exist between them and the

delivered product.

• YASKAWA may modify this model without notice when necessary

due to product improvements, modifications, or changes in

specifications.If such modification is made, the manual number will

also be revised.

• If your copy of the manual is damaged or lost, contact a YASKAWA

representative to order a new copy. The representatives are listed

on the back cover. Be sure to tell the representative the manual

number listed on the front cover.

• YASKAWA is not responsible for incidents arising from unauthorized

modification of its products. Unauthorized modification voids your

product's warranty.

NOTE

This instruction manual is applicable to both FS100 (a

controller for small-sized manipulators) and FS100L (a

controller for large and medium-sized manipulators).

The description of “FS100” refers to both ”FS100” and

“FS100L” in this manual unless otherwise specified.

3 of 28

174512-1CD

HW1483164

Conveyor Coordinated

Function

We suggest that you obtain and review a copy of the ANSI/RIA National

Safety Standard for Industrial Robots and Robot Systems (ANSI/RIA

R15.06-2012). You can obtain this document from the Robotic Industries

Association (RIA) at the following address:

Robotic Industries Association

900 Victors Way

P.O. Box 3724

Ann Arbor, Michigan 48106

TEL: (734) 994-6088

FAX: (734) 994-3338

www.roboticsonline.com

Ultimately, well-trained personnel are the best safeguard against

accidents and damage that can result from improper operation of the

equipment. The customer is responsible for providing adequately trained

personnel to operate, program, and maintain the equipment. NEVER

ALLOW UNTRAINED PERSONNEL TO OPERATE, PROGRAM, OR

REPAIR THE EQUIPMENT!

We recommend approved Yaskawa training courses for all personnel

involved with the operation, programming, or repair of the equipment.

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications.

4 of 28

174512-1CD

HW1483164

Conveyor Coordinated

Function Notes for Safe Operation

Notes for Safe Operation

Read this manual carefully before installation, operation, maintenance, or

inspection of the FS100.

In this manual, the Notes for Safe Operation are classified as “DANGER”,

“WARNING”, “CAUTION”, “MANDATORY” or ”PROHIBITED”.

Even items described as “CAUTION” may result in a serious accident in

some situations.

At any rate, be sure to follow these important items.

DANGER

Indicates an imminent hazardous

situation which, if not avoided, could

result in death or serious injury to

personnel.

WARNING

Indicates a potentially hazardous

situation which, if not avoided, could

result in death or serious injury to

personnel.

CAUTION

Indicates a potentially hazardous

situation which, if not avoided, could

result in minor or moderate injury to

personnelanddamagetoequipment.

It may also be used to alert against

unsafe practices.

MANDATORY

Always be sure to follow explicitly the

items listed under this heading.

PROHIBITED

Must never be performed.

NOTE

To ensure safe and efficient operation at all times, be sure

to follow all instructions, even if not designated as

“DANGER”, “WARNING” and “CAUTION”.

5 of 28

Notes for Safe Operation

174512-1CD

HW1483164

Conveyor Coordinated

Function

WARNING

• Before operating the manipulator, check that servo power is turned

OFF when the emergency stop button on the programming pendant

is pressed.

When the servo power is turned OFF, the SERVO ON LED on the

programing pendant is turned OFF.

Injury or damage to machinery may result if the emergency stop circuit

cannot stop the manipulator during an emergency. The manipulator

should not be used if the emergency stop button does not function.

Figure 1: Emergency Stop Button

• In the case of not using the programming pendant, be sure to

supply the emergency stop button on the equipment. Then before

operating the manipulator, check to be sure that the servo power is

turned OFF by pressing the emergency stop button.

Connect the external emergency stop button to the 5-6 pin and 16-

17 pin of the robot system signal connector (CN2).

• Upon shipment of the FS100, this signal is connected by a jumper

cable in the dummy connector. To use the signal, make sure to

supply a new connector, and then input it.

If the signal is input with the jumper cable connected, it does not

function, which may result in personal injury or equipment damage.

• Once the emergency stop button is released, clear the cell of all

items which could interfere with the operation of the manipulator.

Then turn the servo power ON.

Injury may result from unintentional or unexpected manipulator motion.

Figure 2: Release of Emergency Stop Button

• Observe the following precautions when performing teaching

operations within the manipulator’s operating range:

– Be sure to use a lockout device to the safeguarding when

going inside. Also, display the sign that the operation is

being performed inside the safeguarding and make sure no

one closes the safeguarding.

– View the manipulator from the front whenever possible.

– Always follow the predetermined operating procedure.

– Keep in mind the emergency response measures against the

manipulator’s unexpected motion toward you.

– Ensure that you have a safe place to retreat in case of

emergency.

Improper or unintended manipulator operation may result in injury.

TURN

6 of 28

vii

174512-1CD

HW1483164

Conveyor Coordinated

Function Notes for Safe Operation

WARNING

• Confirm that no person is present in the manipulator’s operating

range and that you are in a safe location before:

– Turning ON the power for the FS100.

– Moving the manipulator with the programming pendant.

– Running the system in the check mode.

– Performing automatic operations.

Injury may result if anyone enters the manipulator’s operating range

during operation. Always press an emergency stop button immediately

if there are problems.

The emergency stop button is located on the programing pendant.

CAUTION

• Perform the following inspection procedures prior to teaching the

manipulator. If problems are found, correct them immediately, and

be sure that all other necessary tasks have been performed.

– Check for problems in manipulator movement.

– Check for damage to the insulation and sheathing of external

wires.

• Return the programming pendant to a safe place after use.

If the programming pendant is inadvertently left on the manipulator,

on a fixture, or on the floor, the manipulator or a tool may collide with

the programming pendant during manipulator movement, which may

result in personal injury or equipment damage.

• Read and understand the Explanation of Warning Labels in the

FS100 Instructions before operating the manipulator.

7 of 28

Definition of Terms Used Often in This Manual

viii

174512-1CD

HW1483164

Conveyor Coordinated

Function

Definition of Terms Used Often in This Manual

The MOTOMAN is the YASKAWA industrial robot product.

The MOTOMAN usually consists of the manipulator, the FS100 controller,

manipulator cables, the FS100 programming pendant (optional), and the

FS100 programming pendant dummy connector (optional).

In this manual, the equipment is designated as follows:

Descriptions of the programming pendant, buttons, and displays are

shown as follows:

Equipment Manual Designation

FS100 controller FS100

FS100 programming pendant Programming pendant

Cable between the manipulator and

the controller Manipulator Cable

FS100 programming pendant

dummy connector Programming pendant

dummy connector

Equipment Manual Designation

Programming

Pendant Character Keys The keys which have characters printed on

them are denoted with [ ].

ex. [ENTER]

Symbol Keys The keys which have a symbol printed on

them are not denoted with [ ] but depicted

with a small picture.

ex. PAGE key

The Cursor is an exception, and a picture is

not shown.

Axis Keys

Numeric Keys “Axis Keys” and “Numeric Keys” are generic

names for the keys for axis operation and

number input.

Keys pressed

simultaneously When two keys are to be pressed

simultaneously, the keys are shown with a

“+” sign between them,

ex. SHIFT key +COORD key

Mode Key Three kinds of modes that can be selected

by the mode key are denoted as follows:

REMOTE, PLAY, or TEACH

Button Three buttons on the upper side of the

programming pendant are denoted as

follows:

HOLD button

START button

EMERGENCY STOP button

Displays The menu displayed in the programming

pendant is denoted with { }.

ex. {JOB}

PC Keyboard The name of the key is denoted

ex. Ctrl key on the keyboard

GO BACK

PAGE

SHIFT

TOOL SEL

COORD

8 of 28

174512-1CD

HW1483164

Conveyor Coordinated

Function Description of the Operation Procedure

Description of the Operation Procedure

In the explanation of the operation procedure, the expression "Select• • • "

means that the cursor is moved to the object item and the SELECT key is

pressed, or that the item is directly selected by touching the screen.

Registered Trademark

In this manual, names of companies, corporations, or products are

trademarks, registered trademarks, or brand names for each company or

corporation. The indications of (R) and TM are omitted.

9 of 28

Customer Support Information

174512-1CD

HW1483164

Conveyor Coordinated

Function

Customer Support Information

If you need assistance with any aspect of your Conveyor Coordinated

Function system, please contact Motoman Customer Support at the

following 24-hour telephone number:

For routine technical inquiries, you can also contact Motoman Customer

Support at the following e-mail address:

When using e-mail tocontact Motoman Customer Support, please provide

a detailed description of your issue, along with complete contact

information. Please allow approximately 24 to 36 hours for a response to

your inquiry.

Please have the following information ready before you call Customer

Support:

[email protected]

NOTE

Please use e-mail for routine inquiries only. If you have an

urgent or emergency need for service, replacement parts,

or information, you must contact Motoman Customer

Support at the telephone number shown above.

• System Conveyor Coordinated Function

• Robots ___________________________

• Primary Application ___________________________

• Controller FS100 & FS100L

• Software Version Access this information on the

Programming Pendant’s LCD

display screen by selecting {MAIN

MENU} - {SYSTEM INFO} -

{VERSION}

• Robot Serial Number Located on the robot data plate

• Robot Sales Order Number Located on the FS100 & FS100L

controller data plate

(937) 847-3200

10 of 28

Other manuals for MOTOMAN FS100

This manual suits for next models

Table of contents

Other YASKAWA Controllers manuals

YASKAWA

YASKAWA SI-EP3 User manual

YASKAWA

YASKAWA FSDrive-MV1000 Series User manual

YASKAWA

YASKAWA Motoman DX200 User manual

YASKAWA

YASKAWA MEMOCON GL120 User manual

YASKAWA

YASKAWA PROFIBUS-DP User manual

YASKAWA

YASKAWA YRC1000 User manual

YASKAWA

YASKAWA PROFIBUS-DP 1000 Series User manual

YASKAWA

YASKAWA CIMR-G7U User manual

YASKAWA

YASKAWA VIPA System 300S+ User manual

YASKAWA

YASKAWA YRC1000 User manual

YASKAWA

YASKAWA A1000 HHP Owner's manual

YASKAWA

YASKAWA J1000 CIMR-JC series User manual

YASKAWA

YASKAWA pg-b3 User manual

YASKAWA

YASKAWA JAPMC-CP3301-1-E User manual

YASKAWA

YASKAWA E7N User manual

YASKAWA

YASKAWA P1000 User manual

YASKAWA

YASKAWA Z1000 CIMR-ZU*A Series User manual

YASKAWA

YASKAWA CIMR-VC series User manual

YASKAWA

YASKAWA iQpump 7 User manual

YASKAWA

YASKAWA MP2200 User manual

YASKAWA

YASKAWA SGD7S-***A20****F62 Series User manual

YASKAWA

YASKAWA motoman NX100 User manual

YASKAWA

YASKAWA MOTOMAN-NX100 User manual

YASKAWA

YASKAWA Motoman MLX200 Mounting instructions

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide