Xtreme Power Conversion P80 User manual

P80 Online UPS

1000VA - 5000VA Models

Service Manual

Xtreme Power Conversion Corporaon

G90 Service Manual

Page 2

Uninterrupble Power Supply

Table of Contents

Overview and introducon...........................................................................4

UPS range........................................................................................................................................5

Topology..........................................................................................................................................5

Charger features..............................................................................................................................5

Baery features...............................................................................................................................5

Addional features..........................................................................................................................5

Important Safety Instrucons......................................................................6

Operaon and seng..................................................................................7

Switch panel....................................................................................................................................7

LCD Panel........................................................................................................................................7

UPS Seng....................................................................................................................................9

Operang Mode Descripon.........................................................................................................13

Faults Reference Code...................................................................................................................14

Warning indicator..........................................................................................................................14

Audible Alarm...............................................................................................................................15

Circuit principle.........................................................................................15

Funconal diagram.......................................................................................................................15

Subsystem instrucon...................................................................................................................15

Charger Sub-System......................................................................................................................16

Auxiliary Power Supply Sub-System...............................................................................................16

Inverter Sub-System.......................................................................................................................17

Output and lter Sub-System.........................................................................................................17

DC-DC Converter Sub-System.......................................................................................................18

Control board................................................................................................................................18

Regulaon & control sub-system..................................................................................................18

Xtreme Power Conversion Corporaon

G90 Service Manual

Page 3

Uninterrupble Power Supply

Protecon sub-system..................................................................................................................18

Signaling Sub-System....................................................................................................................18

Trouble Shoong.......................................................................................20

Trouble Shoong Chart.................................................................................................................20

Failure Diagnosis............................................................................................................................21

Step to open the case...................................................................................................................21

Crical component list..................................................................................................................22

Overview.......................................................................................................................................24

Xtreme Power Conversion Corporaon

G90 Service Manual

Page 4

Uninterrupble Power Supply

Overview and introducon

Rear Panel View

1. Programmable outlets: connect to non-crical loads.

2. Output receptacles: connect to mission-crical loads.

3. AC input

4. Input circuit breaker

5. Network/Fax/Modem surge protecon

6. Emergency power o funcon connector (EPO)

7. USB communicaon port

8. RS-232 communicaon port

9. SNMP intelligent slot

10. External baery connector (only available for L model)

800/1.1K/1.5K IEC Type 2K IEC Type

3K IEC Type 800/1.1/1.5K NEMA Type

2K NEMA Type 2.5K/3K NEMA Type

Xtreme Power Conversion Corporaon

G90 Service Manual

Page 5

Uninterrupble Power Supply

UPS range

Standard models: 800/1000/1500/2000/3000/5000VA, 120/230V

Topology

• Line interacve type.

• Sine waveform output voltage

• High frequency transformer for DC/DC conversion and DC/AC conversion

• Low frequency transformer for buck-boost (AVR)

Charger features

• Charger works even if the UPS is in standby mode.

• 3 stage charging management.

• OVP and short-circuit protecon

• Charger smart controlled by CPU.

Baery features

• Cold start: the unit can start on baery.

• Baery deep discharge protecon: minimum baery level linked with customer load level.

• Baery test: at each start-up and then, once every week.

Addional features

• Nominal voltage: output voltage can be set through the UPS LCD panel (208/220/230/240V) (110/115/120/127V).

• Emergency Power O (EPO): EPO connector at rear panel allow to turn o the output voltage.

• Green funcon: when autonomy, the UPS will shut down automacally when equipment power consumpon

less than 5%.

• Programmable Outlet: when autonomy, the programmable outlet power supply me can be set through the

monitor soware or the UPS LCD panel.

• High Surge level immunity

• Smart fan speed control

• RS232/USB and Slot operaon simultaneous.

• Dry contact signal in DB9 port(oponal)

Xtreme Power Conversion Corporaon

G90 Service Manual

Page 6

Uninterrupble Power Supply

Aenons

For all series of UPS, they are strictly tested and carefully designed. We always do our best to make our products

more reliable and safer; this is also the goal of our company. However, due to the lifeme of electrical components

and some unpredictable reasons, there will be unavoidable failures of this UPS. If this situaon occurs, service of

qualied person is needed. This service manual will guide the technicians to repair and adjust a problemac UPS.

If the UPS sll does not work properly, please contact with us and we will be glad to solve any problems you met.

Because of the following unique features of this series UPS (Uninterrupble Power System), it is very easy to main-

tain and service.

* All major power components are put on POWER PCB.

* POWER PCB and CONTROL PCB are interconnected with connectors.

* Major parts are simply connected with exible insulated wires and plugs.

This service manual consists of 4 major parts:

• Introducon.

• Principle of operaon: It describes the funcons and principles of each part.

• Alignments: It describes the locaons and methods needed to adjust this UPS.

• Trouble shoong: This part describes the possible failure condions and procedures to repair it.

Before starng to serve this UPS, be sure to read this manual carefully for a correct and safe operaon.

Important Safety Instrucons

1. For qualied service personnel only.

2. DO NOT perform any internal service or adjustment of this product unless another person is capable of render-

ing rst aid and resuscitaon is present.

3. Dangerous voltage exists at several points in this product. To avoid personal injury, don’t touch any exposed

connecons or components while UPS is acve.

4. Turn o the UPS and disconnect input power cord before removing outside protecve cover.

5. AC voltage is always present if the input AC power is sll available.

6. High voltage may present at DC capacitors. Before opening the outside cover, wait for at least ve minutes

aer turning o the UPS.

7. Verify input source (voltage and frequency) before service.

1. DO NOT make internal baeries short-circuited.

2. If the baery connectors are disconnected, be sure to plug in the input power cord and the input power is

available before re-connect the baery connectors.

3. Aer service, verify the polarity of baeries, the ghtness of all screws and connectors before restarng the

UPS.

Aer opening the cover, please always check the ghtness of all wires, connectors and screws rst. Then check if

there are any de-colored components inside.

Xtreme Power Conversion Corporaon

G90 Service Manual

Page 7

Uninterrupble Power Supply

Operaon and seng

Switch panel

Buon Funcon

ON/MUTE Buon • Turn on the UPS: Press and hold ON/Mute buon for at least 2 seconds to turn

on the UPS.

• Mute the alarm: Aer the UPS is turned on in baery mode, press and hold this

buon for at least 3 seconds to disable or enable the alarm system. But it’s not

applied to the situaons when warnings or errors occur.

• Up key: Press this buon to display previous selecon in UPS seng mode.

• Switch to UPS self-test mode: Press and hold ON/Mute buon for 3 seconds to

enter UPS self-tesng while in AC mode

OFF/ENTER Buon • Turn o the UPS: Press and hold this buon at least 2 seconds to turn o the

UPS

• Conrm selecon key: Press this buon to conrm selecon in UPS seng

mode.

SELECT Buon • Switch LCD message: Press this buon to change the LCD message for input

voltage, input frequency, baery voltage, output voltage and output frequency.

• Seng mode: Press and hold this buon for 3 seconds to enter UPS seng

mode when UPS is o.

• Down key: Press this buon to display next selecon in UPS seng mode.

Select + OFF/Enter Buon • Rack or Tower display switch: Press Select and OFF/Enter buons simultane-

ously for 3 seconds. The display change from/to Rack to/from Tower.

LCD Panel

Battery info

Load info

Input/output

and Battery

info

UPS status

Warning

& Fault info/

Setting

operation

Backup

time

info

Load info

UPS status

Backup time

info

Input/output

and Battery

info

Warning & Fault info/

Setting operation

Battery info

Rack Display Tower Display

Xtreme Power Conversion Corporaon

G90 Service Manual

Page 8

Uninterrupble Power Supply

Backup me informaon

Indicates the backup me in pie chart.

Indicates the backup me in numbers.

H: hours, M: minute

Warning & Fault informaon

Indicates that the warning and fault occurs.

Indicates the warning and fault codes, and the codes are listed in details in 3-5 secon.

Seng Operaon

Indicates the seng operaon.

Input/Output & Baery informaon

Indicates the output/input voltage, output/input frequency or baery voltage. V: volt-

age, Hz: frequency

Load informaon

Indicates the load level by 0-24%, 25-49%, 50-74%, and 75-100%.

Indicates overload.

Indicates the load or the UPS output is short circuited.

UPS status

Indicates that programmable management outlets are working.

Indicates that the UPS alarm is disabled.

Indicates the UPS powers the output directly from the mains

Indicates the baery charger is working.

Indicates the UPS is working in boost mode

Indicates the UPS is working in buck mode

Baery informaon

Indicates the Baery level by 0-24%, 25-49%, 50-74%, and 75-100%.

Indicates low baery.

Indicates there is something wrong with baery.

Xtreme Power Conversion Corporaon

G90 Service Manual

Page 9

Uninterrupble Power Supply

LCD display wordings index

Abbreviaon Display content Meaning

ENA Enable

DIS Disable

ESC Escape

ON ON

OK OK

EP EPO

AO Acve open

AC Acve close

TP Temperature

CH Charger

RAC Rack display

TOE Tower display

SF Site Fault

EE EEPROM error

BR Baery Replacement

UPS Seng

Parameters 1

Parameters 2

There are two parameters to set up the UPS.

Parameter 1: It’s for program alternaves. Refer to below

table for details.

Parameter 2: It’s seng opons or values for each program.

Xtreme Power Conversion Corporaon

G90 Service Manual

Page 10

Uninterrupble Power Supply

Output voltage seng

Interface Seng

For 208/220/230/240 VAC models, you may choose the

following output voltage:

208: presents output voltage is 208Vac 220: presents

output voltage is 220Vac

230: presents output voltage is 230Vac (Default) 240:

presents output voltage is 240Vac

For 110/115/120/127 VAC models, you may choose the

following output voltage:

110: presents output voltage is 110Vac 115: presents

output voltage is 115Vac

120: presents output voltage is 120Vac (Default) 127:

presents output voltage is 127Vac

Programmable outlets enable/disable

Interface Seng

ENA: Programmable outlets enable (Default) DIS: Pro-

grammable outlets disable

Programmable outlets seng

Interface Seng

Seng the backup me limits in minutes from 0-999

for programmable outlets which connect to non-cri-

cal devices on baery mode.

Table of contents

Other Xtreme Power Conversion UPS manuals

Xtreme Power Conversion

Xtreme Power Conversion Pure Sine Wave Series Guide

Xtreme Power Conversion

Xtreme Power Conversion E90 Series User manual

Xtreme Power Conversion

Xtreme Power Conversion XVT 600VA User manual

Xtreme Power Conversion

Xtreme Power Conversion XPRT-6kVA Guide

Xtreme Power Conversion

Xtreme Power Conversion S70 Line?Interactive Guide

Xtreme Power Conversion

Xtreme Power Conversion M90 Guide

Xtreme Power Conversion

Xtreme Power Conversion P91g Series Guide

Xtreme Power Conversion

Xtreme Power Conversion XVT Series Operating manual

Xtreme Power Conversion

Xtreme Power Conversion P90g Series Guide

Xtreme Power Conversion

Xtreme Power Conversion P90-BP36 Guide

Xtreme Power Conversion

Xtreme Power Conversion 1000VA Guide

Xtreme Power Conversion

Xtreme Power Conversion XVT 600VA Guide

Xtreme Power Conversion

Xtreme Power Conversion NXRT?1000 Guide

Xtreme Power Conversion

Xtreme Power Conversion NXRi-6KL Guide

Xtreme Power Conversion

Xtreme Power Conversion P90 1000VA Guide

Xtreme Power Conversion

Xtreme Power Conversion TX90-1000 Guide

Xtreme Power Conversion

Xtreme Power Conversion P91c-1000 Guide

Xtreme Power Conversion

Xtreme Power Conversion NXTi 3P-3P Guide

Xtreme Power Conversion

Xtreme Power Conversion XVT 600VA Guide

Xtreme Power Conversion

Xtreme Power Conversion 700VA Guide

Xtreme Power Conversion

Xtreme Power Conversion M90S Series User manual

Xtreme Power Conversion

Xtreme Power Conversion A60-550 Guide

Xtreme Power Conversion

Xtreme Power Conversion XVT?600 Guide

Xtreme Power Conversion

Xtreme Power Conversion P80g Guide

Popular UPS manuals by other brands

Pylontech

Pylontech Victron & Pylontech US5000 manual

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 user manual

Mecer

Mecer ME-1000-WTU user manual

Mustek

Mustek PowerMust 530(B) Plus Startup manual

Emerson

Emerson Liebert NXL series Operation and maintenance manual

MAKELSAN

MAKELSAN BOXER SERIES user manual

Block

Block PC-0524-400-0 manual

CyberPower

CyberPower CP585LCD user manual

Eaton

Eaton 3S Advanced user's guide

CyberPower

CyberPower Office Tower Series UPS 1000 user manual

CyberPower

CyberPower BM100 quick start guide

Best Power

Best Power 610 quick start guide

Best Power

Best Power Unity/I UT3K user manual

Mustek

Mustek PowerMust 400 Offline user manual

Xantrex

Xantrex Trace 512 UR-UPS owner's manual

Forza

Forza SL-1501UL user manual

LEGRAND

LEGRAND keor 310081 quick start guide

ABB

ABB Conceptpower DPA 500 operating manual