Xtreme Power Conversion NXTi 3P-3P Guide

NXTi 3P-3P Online UPS

20kVA Model

User & Installaon Manual

Xtreme Power Conversion Corporaon

NXTi 3P-3P User’s Manual

Page 2

Uninterrupble Power Supply

Table of Contents

Safety and EMC Instrucons.........................................................................3

Transportaon and Storage.............................................................................................................3

Preparaon......................................................................................................................................3

Installaon.......................................................................................................................................3

Standards.........................................................................................................................................4

Installaon and Operaon........................................................................... 4

Unpacking and Inspecon...............................................................................................................4

Rear Panel View...............................................................................................................................5

Single UPS Installaon.....................................................................................................................6

UPS Installaon for Parallel System.................................................................................................7

Soware Installaon........................................................................................................................8

Operaons...................................................................................................8

Buon Operaon.............................................................................................................................8

LED Indicators and LCD Panel..........................................................................................................9

Audible Alarm................................................................................................................................11

Single UPS Operaon.....................................................................................................................12

Parallel Operaon..........................................................................................................................14

Abbreviaon Meaning in LCD Display............................................................................................16

LCD Seng.....................................................................................................................................17

Operang Mode/Status Descripon.............................................................................................24

Fault Code..................................................................................................................................... 32

Warning Indicator..........................................................................................................................33

Warning Code............................................................................................................................... 33

Troubleshoong.........................................................................................34

Storage and Maintenance..........................................................................35

Storage...........................................................................................................................................35

Maintenance..................................................................................................................................35

Specicaons.............................................................................................36

Xtreme Power Conversion Corporaon

NXTi 3P-3P User’s Manual

Page 3

Uninterrupble Power Supply

Safety and EMC Instrucons

Please read carefully the following user manual and the safety instrucons before installing the unit or using the

unit!

Transportaon and Storage

• Please transport the UPS system only in the original package to protect against shock and impact. The UPS

must be stored in the room where it is venlated and dry.

Preparaon

• Condensaon may occur if the UPS system is moved directly from cold to warm environment. The UPS

system must be absolutely dry before being installed. Please allow at least two hours for the UPS system

to acclimate the environment.

• Do not install the UPS system near water or in moist environments.

• Do not install the UPS system where it would be exposed to direct sunlight or nearby heater.

• Do not block venlaon holes in the UPS housing.

Installaon

• Do not connect appliances or devices which would overload the UPS (e.g. big motor-type equipment)) to

the UPS output sockets or terminal.

• Place cables in such a way that no one can step on or trip over them.

• Do not block air vents in the housing of UPS. The UPS must be installed in a locaon with good venlaon.

Ensure enough space on each side for venlaon.

• UPS has provided earthed terminal, in the nal installed system conguraon, equi-potenal earth bond-

ing to the external UPS baery cabinets.

• The UPS can be installed only by qualied maintenance personnel.

• An appropriate disconnect device as short-circuit backup protecon should be provided in the building

wiring installaon.

• An integral single emergency switching device which prevents further supply to the load by the UPS in any

mode of operaon should be provided in the building wiring installaon.

• Connect the earth before connecng to the building wiring terminal.

• Installaon and Wiring must be performed in accordance with the local electrical laws and regulaons.

Operaon

• Do not disconnect the earth conductor cable on the UPS or the building wiring terminals in any me since

this would cancel the protecve earth of the UPS system and of all connected loads.

• The UPS system features its own, internal current source (baeries). The UPS output sockets or output ter-

minal blocks may be electrically live even if the UPS system is not connected to the building wiring outlet.

• In order to fully disconnect the UPS system, rst press the “OFF” buon and then disconnect the mains

• Ensure that no liquid or other foreign objects can enter into the UPS system.

• The UPS can be operated by any individuals with no previous experience.

Xtreme Power Conversion Corporaon

NXTi 3P-3P User’s Manual

Page 4

Uninterrupble Power Supply

Standards

* Safety

IEC/EN 62040-1

* EMI

Conducted Emission...............................:IEC/EN 62040-2 Category C3

Radiated Emission..................................:IEC/EN 62040-2 Category C3

*EMS

ESD.........................................................:IEC/EN 61000-4-2 Level 4

RS...........................................................:IEC/EN 61000-4-3 Level 3

EFT.........................................................:IEC/EN 61000-4-4 Level 4

SURGE...................................................:IEC/EN 61000-4-5 Level 4

CS...........................................................:IEC/EN 61000-4-6 Level 3

Power-frequency Magnec eld..............:IEC/EN 61000-4-8 Level 4

Low Frequency Signals............................:IEC/EN 61000-2-2

Warning: This is a product for commercial and industrial applicaon in the second environment-installaon re-

stricons or addional measures may be needed to prevent disturbances.

Installaon and Operaon

There are two dierent types of online UPS: standard and long-run models. Please refer to the following model

table.

Model Type Model Type

NXTi-20K Standard model NXTi-20KL Long-run model

We also oer oponal parallel funcon for these two types by request. The UPS with parallel funcon is called as

“Parallel model”. We have described detailed installaon and operaon of Parallel Model in the following chapter.

Unpacking and Inspecon

Unpack the package and check the package contents. The shipping package contains:

• One UPS

• One user manual

• One monitoring soware CD

• One RS-232 cable (opon)

• One USB cable

• One parallel cable (only available for parallel model)

• One share current cable (only available for parallel model)

NOTE: Before installaon, please inspect the unit. Be sure that nothing inside the package is damaged during

transportaon. Do not turn on the unit and nofy the carrier and dealer immediately if there is any damage or

lacking of some parts. Please keep the original package in a safe place for future use.

Xtreme Power Conversion Corporaon

NXTi 3P-3P User’s Manual

Page 5

Uninterrupble Power Supply

Rear Panel View

20K/20KL Rear Panel

20K/20KL Input/Output Terminal

Xtreme Power Conversion Corporaon

NXTi 3P-3P User’s Manual

Page 6

Uninterrupble Power Supply

1. RS-232 communicaon port

2. USB communicaon port

3. Emergency power o funcon connector (EPO connector)

4. Share current port (only available for parallel model)

5. Parallel port (only available for parallel model)

6. Intelligent slot

7. Power stage fan

8. External baery terminal(Only available for long-run model)

9. Bypass Input Circuit Breaker(Only available for dual input unit)

10. Input/Output terminal (Refer to Diagram 2)

11. Line Input circuit breaker

12. Maintenance bypass switch

13. Output Grounding terminal

14. Output terminal: connect to mission-crical loads

15. Line input terminal

16. Bypass input terminal(Only available for dual input)

17. Input Grounding terminal

Single UPS Installaon

Installaon and wiring must be performed in accordance with the local electric laws/regulaons and execute the

following instrucons by professional personnel.

1. Make sure the mains wire and breakers in the building are enough for the rated capacity of UPS to avoid

the hazards of electric shock or re.

NOTE: Do not use the wall receptacle as the input power source for the UPS, as its rated current is less than

the UPS’s maximum input current. Otherwise the receptacle may be burned and destroyed.

2. Switch o the mains switch in the building before installaon.

3. Turn o all the connected devices before connecng to the UPS.

4. Prepare wires based on the following table:

Model Wiring spec (AWG)

Input(Ph) Output(Ph) Neutral Baery Ground

20K 8 8 6 –6

20KL 8 8 6 6 6

NOTE 1: The cable for 20K/20KL should be able to withstand over 63A current. It is recommended to use

AWG 8 or thicker wire for Phase and AWG 6 or thicker wire for Neutral for safety and eciency.

NOTE 2: The cable for 30K/30KL should be able to withstand over 63A current. It is recommended to use

AWG 8 or thicker wire for Phase and AWG 4 or thicker wire for Neutral for safety and eciency.

NOTE 3: The selecons for color of wires should be followed by the local electrical laws and regulaons.

5. Remove the terminal block cover on the rear panel of UPS. Then connect the wires according to the fol-

lowing terminal block diagrams: (Connect the earth wire rst when making wire connecon. Disconnect

the earth wire last when making wire disconnecon!)

Xtreme Power Conversion Corporaon

NXTi 3P-3P User’s Manual

Page 7

Uninterrupble Power Supply

Terminal Block wiring diagram of 20K/20KL

NOTE 1: Make sure that the wires are connected ghtly with the terminals.

NOTE 2: Please install the output breaker between the output terminal and the load, and the breaker

should be qualied with leakage current protecve funcon if necessary.

6. Put the terminal block cover back to the rear panel of the UPS.

Warning: (Only for standard model)

• Make sure the UPS is not turned on before installaon. The UPS should not be turned on during wiring

connecon.

• Do not try to modify the standard model to the long-run model. Parcularly, do not try to connect the

standard internal baery to the external baery. The baery type and voltage may be dierent. If you con-

nect them together, it maybe causes the hazard of electric shock or re!

Warning: (Only for long-run model)

Make sure a DC breaker or other protecon device between UPS and external baery pack is installed. If not,

please install it carefully. Switch o the baery breaker before installaon.

NOTE: Set the baery pack breaker in “OFF” posion and then install the baery pack.

• Pay highly aenon to the rated baery voltage marked on the rear panel. If you want to change the num-

bers of the baery pack, please make sure you modify the seng simultaneously. The connecon with

wrong baery voltage may cause permanent damage of the UPS. Make sure the voltage of the baery

pack is correct

• Pay highly aenon to the polarity marking on external baery terminal block, and make sure the correct

baery polarity is connected. Wrong connecon may cause permanent damage of the UPS.

• Make sure the protecve earth ground wiring is correct. The wire current spec, color, posion, connecon

and conductance reliability should be checked carefully.

• Make sure the ulity input & output wiring is correct. The wire current spec, color, posion, connecon

and conductance reliability should be checked carefully. Make sure the L/N site is correct, not reverse and

short-circuited.

UPS Installaon for Parallel System

If the UPS is only available for single operaon, you may skip this secon to the next.

1. Install and wires the UPSs according to the Single UPS Installaon secon.

2. Connect the output wires of each UPS to an output breaker.

3. Connect all output breakers to a major output breaker. Then this major output breaker will directly con-

nect to the loads.

4. Each UPS is connected to an independent baery pack.

Xtreme Power Conversion Corporaon

NXTi 3P-3P User’s Manual

Page 8

Uninterrupble Power Supply

NOTE: The parallel system cannot use one baery pack. Otherwise, it will cause system permanent failure.

5. Refer to the following wiring diagram:

Wiring diagram of parallel system for 20K/20KL

Soware Installaon

For opmal computer system protecon, install UPS monitoring soware to fully congure UPS shutdown.

Operaons

Buon Operaon

Buon Funcon

ON/Enter Buon • Turn on the UPS: Press and hold the buon more than 0.5s to turn on the UPS.

• Enter Key: Press this buon to conrm the selecon in seng menu.

OFF/ESC Buon • Turn o the UPS: Press and hold the buon more than 0.5s to turn o the UPS.

• Esc key: Press this buon to return to last menu in seng menu.

Test/Up Buon

• Baery test: Press and hold the buon more than 0.5s to test the baery while in

AC mode and CVCF* mode.

• UP key: Press this buon to display next selecon in seng menu.

Mute/Down Buon • Mute the alarm: Press and hold the buon more than 0.5s to mute the buzzer.

• Down key: Press this buon to display previous selecon in seng menu.

Test/Up + Mute/Down

Buon

• Press and hold the two buons simultaneous more than 1s to enter/escape the

seng menu.

* CVCF means Constant Voltage and Constant Frequency.

Xtreme Power Conversion Corporaon

NXTi 3P-3P User’s Manual

Page 9

Uninterrupble Power Supply

LED Indicators and LCD Panel

LED Indicators

There are 4 LEDs on front panel to show the UPS working status:

Mode Bypass Line Baery Fault

UPS On ● ● ● ●

No Output mode ○ ○ ○ ○

Bypass mode ● ○ ○ ○

AC mode ○ ● ○ ○

Baery mode ○ ○ ● ○

CVCF mode ○ ● ○ ○

Baery Test ● ● ● ○

ECO mode ● ● ○ ○

Fault ○ ○ ○ ●

Note: ● means LED is lighng, and ○ means LED is faded.

LCD Panel

Xtreme Power Conversion Corporaon

NXTi 3P-3P User’s Manual

Page 10

Uninterrupble Power Supply

Display Funcon

Backup me informaon

Indicates the baery discharge me in numbers

H: hours, M: minutes, S: seconds

Fault informaon

Indicates that the warning and fault occurs.

Indicates the fault codes

Mute operaon

Indicates that the UPS alarm is disabled.

Output & Baery voltage informaon

Indicates the output voltage, frequency or baery voltage. Vac: output voltage, Vdc:

baery voltage, Hz: frequency

Load informaon

Indicates the load level by 0-25%, 26-50%, 51-75%, and 76-100%.

Indicates overload.

Indicates the load or the output is short.

Mode operaon informaon

Indicates the UPS connects to the mains.

Indicates the baery is working.

Indicates the bypass circuit is working.

Indicates the ECO mode is enabled.

Indicates the Inverter circuit is working.

Indicates the output is working.

Baery informaon

Table of contents

Other Xtreme Power Conversion UPS manuals

Xtreme Power Conversion

Xtreme Power Conversion P90g Series Guide

Xtreme Power Conversion

Xtreme Power Conversion M90 Guide

Xtreme Power Conversion

Xtreme Power Conversion M90S Series Guide

Xtreme Power Conversion

Xtreme Power Conversion Pure Sine Wave Series Guide

Xtreme Power Conversion

Xtreme Power Conversion P80g Guide

Xtreme Power Conversion

Xtreme Power Conversion NXRT?1000 Guide

Xtreme Power Conversion

Xtreme Power Conversion XVT 600VA User manual

Xtreme Power Conversion

Xtreme Power Conversion P80 User manual

Xtreme Power Conversion

Xtreme Power Conversion XVT?600 Guide

Xtreme Power Conversion

Xtreme Power Conversion XPRT 6/10KVA Guide

Xtreme Power Conversion

Xtreme Power Conversion XPRT-6kVA Guide

Xtreme Power Conversion

Xtreme Power Conversion Network Xtreme Rack/Tower Series Operating manual

Xtreme Power Conversion

Xtreme Power Conversion XST?400 User manual

Xtreme Power Conversion

Xtreme Power Conversion M90S Series User manual

Xtreme Power Conversion

Xtreme Power Conversion XVT Series Operating manual

Xtreme Power Conversion

Xtreme Power Conversion M90U Guide

Xtreme Power Conversion

Xtreme Power Conversion P91 User manual

Xtreme Power Conversion

Xtreme Power Conversion P90-BP36 Guide

Xtreme Power Conversion

Xtreme Power Conversion S70 Line?Interactive Guide

Xtreme Power Conversion

Xtreme Power Conversion 1000VA Guide

Xtreme Power Conversion

Xtreme Power Conversion A60 Standby Guide

Xtreme Power Conversion

Xtreme Power Conversion XVT 600VA Guide

Xtreme Power Conversion

Xtreme Power Conversion P90 1000VA Guide

Xtreme Power Conversion

Xtreme Power Conversion 800VA P80 Series Guide

Popular UPS manuals by other brands

Pylontech

Pylontech Victron & Pylontech US5000 manual

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 user manual

Mecer

Mecer ME-1000-WTU user manual

Mustek

Mustek PowerMust 530(B) Plus Startup manual

Emerson

Emerson Liebert NXL series Operation and maintenance manual

MAKELSAN

MAKELSAN BOXER SERIES user manual

Block

Block PC-0524-400-0 manual

CyberPower

CyberPower CP585LCD user manual

Eaton

Eaton 3S Advanced user's guide

CyberPower

CyberPower Office Tower Series UPS 1000 user manual

CyberPower

CyberPower BM100 quick start guide

Best Power

Best Power 610 quick start guide

Best Power

Best Power Unity/I UT3K user manual

Mustek

Mustek PowerMust 400 Offline user manual

Xantrex

Xantrex Trace 512 UR-UPS owner's manual

Forza

Forza SL-1501UL user manual

LEGRAND

LEGRAND keor 310081 quick start guide

ABB

ABB Conceptpower DPA 500 operating manual