Xerox PHASER 340 Configuration guide

Other manuals for PHASER 340

4

Table of contents

Other Xerox Printer manuals

Xerox

Xerox PHASER 6250 User manual

Xerox

Xerox DocuMate 700 User manual

Xerox

Xerox DocuPrint C6 User manual

Xerox

Xerox Document Centre 240 ST Instructions for use

Xerox

Xerox Phaser 7800 Instruction manual

Xerox

Xerox DocuColor 7000 User manual

Xerox

Xerox Phaser 4500 User manual

Xerox

Xerox DocuPrint N17 Manual

Xerox

Xerox PHASER 7500 Service manual

Xerox

Xerox PHASER 7500 User manual

Xerox

Xerox DocuPrint N3225 User manual

Xerox

Xerox VersaLink C8000 User manual

Xerox

Xerox COLORQUBE 8570 Service manual

Xerox

Xerox XEScan User manual

Xerox

Xerox DocuPrint N4025 Technical manual

Xerox

Xerox Phaser 6180 User manual

Xerox

Xerox Color C60 Series User manual

Xerox

Xerox 4510N - Phaser B/W Laser Printer User manual

Xerox

Xerox Phaser 6120 User manual

Xerox

Xerox PHASER 6140 User manual

Xerox

Xerox Phaser 3600 User manual

Xerox

Xerox Phaser 3052 Operating manual

Xerox

Xerox Docutech 6100 Manual

Xerox

Xerox D110 User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide

Cleaning for light stripes: printhead

Approximate time to complete: 3-10 minutes

If your prints have 1/10 in. (2.5 mm) lengthwise stripes that are the wrong

color or have missing colors, you can correct the problem by cleaning the

printhead. The printer automatically executes a printhead cleaning

sequence when you run the

Clean:Light Stripes

routine from the front

panel.

1.

When the printer is on and the

Ready

message appears, press the

Clean

button. The printer displays the first selection in the menu:

Clean:Light Stripes

<---- Clean Test

2.

Press the

Clean

button once again.

3.

A series of front panel messages indicate the condition of the

printer as it progresses through a sequence of automatic cleaning

routines. The printer outputs a cleaning page at the end of the

cleaning sequence that you may discard as normal ofﬁce waste.

4.

When the cleaning sequence is completed, the printer displays the

following message:

Clean:Light Stripes

<---- Clean Test

9101-48A

5.

To conﬁrm that the problem has been corrected, press the

Test

button to print a test page. Check for any missing color bars on

the test page.

1.

Black

2.

Cyan

3.

Magenta

4.

Yellow

9101-49

1234 678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788

5

1

2

3

4

678910111213

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788

6.

If one or more of the color bars are still missing, repeat the

cleaning sequence by pressing the

Clean

button once again.

When cleaning ends, the printer outputs a cleaning page that you

may discard as normal ofﬁce waste.

If the second cleaning sequence does not cure the light stripes or

missing colors problem, you can press the

Clean

button for a

third time to repeat the cleaning sequence.

7.

If your prints still have color stripe problems after the third

cleaning sequence, service may be required.

8.

Return the printer to normal operation by pressing the button.

Source: 070-9101-03 C4

ExitExit