Whirlpool WHDSCX80112 User manual

1. On/O button (Reset if long

pressed)

2. Programme button (Water

conductivity setting if long

pressed)

3. Cycle end alert

4. Key lock

5. Steam option

6. Knob (Turn to select / Press to

conrm)

7. Start delay

8. Drying time

9. Dryness level

10. Options button

11. Start / Pause button

12. Display

13. Programmes area

CONTROL PANEL

1. Worktop

2. Control panel

3. Water tank

4. Door

5. Door handle

6. Door lter (behind door)

7. Bottom lter (behind ap)

8. Adjustable feet (4)

Before using the appliance carefully read the

Health and Safety guide.

DAILY REFERENCE

GUIDE

PRODUCT DESCRIPTION

APPLIANCE

1. 2. 7.3. 8.

12.

4. 9.5. 10. 11.6.

13.

5. 4.

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your appliance on http://www.whirlpool.eu/register

Make sure that no lighters

or matches remain in the

laundry.

Make sure that the laundry

is not soaked with

ammable liquids.

DAILY USE

FIRST TIME USE

BEFORE USING THE DRYER

CHECK DRAIN HOSE AND WATER TANK

Make sure that the drain hose on the back of the dryer is xed

correctly, either to the dryer’s water tank (see picture), or to your

domestic sewage system (see Installation guide).

Also make sure that the water tank is correctly inserted.

See Use and Care Guide for more details on functions /

see last page for information on how to obtain the Use and Care Guide

1. LOAD LAUNDRY

Prepare your laundry according to the recommendations in

section HINTS AND TIPS.

Make sure that pockets are empty, fasteners closed and

ribbons tied together.

Open the door and load the laundry. Observe the

maximum load sizes given in the PROGRAMME CHART.

2. CLOSE DOOR

Make sure that no laundry gets stuck between door glass

and door lter.

Close the door so that you can hear it click shut.

3. SWITCH ON DRYER

Press the On/O button « until the programme button lights

up. An animation occurs, and there is a sound. Afterwards

the dryer is ready to be operated.

4. SET THE DESIRED PROGRAMME

GUIDED MODE – the button light will guide you through

setting your programme in the following order: selection of

programme / drying time (ONLY if Drying time or Airing

programme is selected) / dryness level (only if selectable /

adjustable) / options. As soon as you conrm a selection by

pressing the knob, the button light will jump to the next

step.

Select programme:

Make sure that the Programme button « lights up.

Turn the knob to select the desired programme.

The indicator next to the selected programme lights up.

Conrm the desired programme by pressing the knob.

Find more information regarding programmes in the

PROGRAMME CHART.

Select Drying time, if needed

Only if you have selected programme Drying time or Airing «,

you can set the desired drying time from a minimum of 10

minutes to maximum 180 minutes (three hours).

Make sure that the Drying time button lights up.

WARNING

Turn the knob to select the desired drying time. Conrm it

by pressing the knob.

Set dryness level, if needed

If you want to change the dryness level, make sure that the

Dryness level button « lights up.

Turn the knob to select the desired dryness level, then press

the knob to conrm.

Select options, if needed

If you want to select additional options, make sure that the

Options button « lights up. The options which are selectable

for your programme are indicated by lighting arrows.

Turn the knob to select the desired options. The symbol of

the selected option will blink. To conrm it, press the knob.

Some options / functions can be selected by directly

pressing the button.

Refer to section OPTIONS, FUNCTIONS AND

INDICATORS for more information.

INDIVIDUAL MODE

After you have switched on the dryer, you are not forced to

follow the GUIDED MODE.

It is up to you which order you choose to set your

programme. To do a setting, rst press the relevant button,

then turn the knob to select, and nally press the knob to

conrm.

The variety of options and dryness levels depends on the

programme selected. Therefore it is recommended to start

your setting with selecting the programme.

5. START PROGRAMME

Press and hold Start/Pause « until the button lights up

solidly; the drying process starts.

The duration can be recalculated and adapted in the course

of the programme.

During such phases, an animation occurs on the display.

6. CHANGE THE SETTINGS OF A RUNNING

PROGRAMME, IF NEEDED

You can still change some settings after a programme was

started:

• Adjust drying time (only if programme Drying time is

selected)

• Add or cancel an option, provided the progress of the

programme still allows it.

Press the relevant button. The selected setting will blink for

a few seconds.

While blinking, you can adjust the setting by turning the

knob. If the value or setting stopped blinking, press the

button again.

Press the knob to conrm the modication. If you do not

conrm, the modication will be conrmed automatically

— the modied setting will stop blinking.

The programme will continue automatically.

To change the settings of a running programme or start

delay, you can also:

• press Start/Pause to put the running programme on pause

• change your settings

• press Start/Pause again to continue the programme.

7. RESET A RUNNING PROGRAMME, IF NEEDED

Press and hold the On/O button « until “rES” appears on

the display.

The programme is ended afterwards.

Immediately open the door and unload the laundry, so that

eventual heat in the laundry can dissipate.

8. SWITCH OFF THE DRYER AFTER PROGRAMME END

At the end of the programme, „End“ appears on the

display. Press On/O « to switch o the dryer. Open the

door and take out your laundry.

The dryer will switch o automatically in about a quarter of

an hour after programme end, to save energy.

9. EMPTY WATER TANK / CLEAN DOOR FILTER /

CLEAN BOTTOM FILTER

Refer to section CARE AND MAINTENANCE.

Respect the care labels of your laundry; make sure that it is

appropriate for being treated in a dryer.

CARE LABELS

The dots indicate the temperature degree for drying the laundry.

Normal temperature

Reduced temperature

Do not tumble dry

EMPTY ALL POCKETS

Objects like coins or keys can damage your laundry as well as the

drum.

ADAPTING THE DRYER TO WATER CONDUCTIVITY

The drying results are aected by the conductivity of the water used

during washing. If, by modifyingthe available dryness levels (iron

dry; cupboard dry; extra dry), you are not satised withthe nal

drying results, you can adapt the water conductivity level. The dryer

comes with preset level 2. Choose between level 1 (most damp

results) and 5 (most dry results).

Press and hold the Programme button until the Conductivity

Adjustment symbolon the display blinks.

Turn the knob to adjust the level (1 –2 – 3 – 4 - 5).

Press the knob to conrm the selected level.

This operation is not needed for every drying cycle. Once the most

satisfying water conductivity level has been identied, you no

longer need to modify it.

Always dry a full load; this optimizes the relative energy

consumption. The maximum load sizes for the various programmes

are indicated in the programme chart.

To reduce the drying time, make sure that the laundry is spun with

the maximum possible spin speed of the wash programme. This

reduces the moisture content in the laundry.

HINTS AND TIPS

SAVING TIPS

Programme Load

(Kg)

Spin Speed

(rpm)

Humidity

(%)

Energy consumption

(kWh)

Drying Time (min)

ECO COTTON * 8

1000

4.74

2.54

135

ECO COTTON 8

800

1400

5.52

3.96

154

117

COTTON IRON DRY

800

1000

1400

4.38

3.92

3.46

131

112

SYNTHETICS

CUPBOARD DRY 3.5 1000 40 1.44 46

CONSUMPTION DATA Data can dier in your home, mainly depending on the moisture

content of the laundry load.

*Reference programmes for Energy Label / Regulation 392/2012 / EU

Values are based on the default programme setting, with clean door

and bottom lter. For consumer tests, the door lter and bottom

lter need to be cleaned after each cycle.

The energy consumption and drying time may dier from the values

above. They depend on the operation conditions in your home

(such as voltage uctuation, mixture of textiles, humidity of the

textiles after spinning, load volume).

The values are determined according to European Norm 61121 and

refer to the default programme setting; changing the setting also

impacts the consumption data.

PROGRAMME CHART

Selectable / Optional —Not Selectable / Applicable

Directly selectable Selectable by options button

Programme

Care Labels

Max Load (Kg)

Dryness level

Steam option

Drying time

Fresh Care

Gentle

Rapid

ECO COTTON max — — — —

COTTON

max

—

MIXED 3.0 — — —

SYNTHETICS

3.5

—

— —

—

DELICATES 2.5 — — — —

WOOL FINISH 1.0 — — — — — —

BIG ITEMS 3.0 — — — —

AIRING

max — — — —

STEAM

REFRESH 1.5 — — — — — —

DRYING TIME max — — — —

PROGRAMMES

Make sure that your laundry is suitable to be treated in a tumble

dryer. Refer to HINTS AND TIPS / Care labels.

ECO COTTON

For drying normally wet cotton laundry.

Standard cotton programme, suitable to dry normal wet

cotton laundry. Most ecient programme in terms of

energy consumption for drying cotton laundry.

The values on the Energy Label are based on this

programme.

COTTON

For drying cotton laundry.

MIXED

For drying mixed laundry made of cotton, linen, synthetic

bres and their blends.

SYNTHETICS

For drying laundry made of synthetic bres.

DELICATES

For drying delicate laundry which needs gentle treatment.

WOOL FINISH

For nishing the air-drying process of woolen textiles.

Woolens get uy and smooth.

No drying programme.

BIG ITEMS

For drying big laundry items, such as sleeping bags,

blankets etc.

AIRING

For airing, refreshing and loosening up laundry without

heating. Select the airing duration with option Drying time.

STEAM REFRESH

For refreshing laundry with steam. Specically designed to

refresh and remove odors from dry and clean casual

garments like shirts, blouses, trousers made out of cotton,

synthetics and their blends. Before loading the laundry into

the drum, slightly humidify it by spraying it with water

(maximum 200 ml; use a water spray bottle). Dryness level

Cupboard dry is preset and cannot be changed. After

programme end, unload the laundry immediately and put

on clothes hangers to minimize creasing.

DRYING TIME

Time-restricted drying programme. Select programme

duration with option Drying time.

For all fabrics appropriate for tumble drying. Suitable to add

an additional short drying phase after programme end.

Refer to OPTIONS, FUNCTIONS AND INDICATORS / option

Drying time for more information.

OPTIONS WHICH ARE DIRECTLY SELECTABLE BY

PRESSING THE RESPECTIVE BUTTON

Steam option

Minimizes creasing of garments made of cotton, synthetics

and their blends by adding a humidifying phase at the end

of the drying cycle.

Use the option with small loads only, unload the garments

from the dryer immediately after programme end and put

them on clothes hangers.

The humidity level automatically adjusts to Cupboard dry

and cannot be changed with this option.

Not combinable with options Fresh care, Rapid and Gentle.

Drying time

To adjust the desired drying time, only if the Drying time or

Airing programme has been selected.

Press the button; the drying time symbol on the display

lights up. Turn the knob to select the desired drying time up

to maximum 180 minutes, then press the knob to conrm it.

Not selectable for any other programme except the Drying

time and Airing programme.

Dryness level

To select the desired dryness level for the laundry load.

Press the button, then turn the knob to select the desired

dryness level; chose between

Iron dry (suitable to be ironed after the drying cycle,

therefore still slightly humid)

OPTIONS, FUNCTIONS AND INDICATORS

Refer to the programme chart to check which options are available for

the selected programme.

Cupboard dry (dry enough to be placed in a

cupboard at the end of the drying cycle)

Extra dry (maximum dryness level)

and conrm by pressing the knob.

OPTIONS WHICH ARE SELECTABLE WITH THE OPTIONS

BUTTON

Fresh Care

Helps to prevent creasing if you cannot unload the laundry

soon after programme end.

The dryer starts to tumble the laundry periodically a few

minutes after programme end. This tumbling will last up to

approximately 12 hours after end of the programme. You

can stop it at any time by switching o the dryer with the

On/O button.

Not combinable with Steam option.

Gentle

Enables a more gentle treatment of the laundry by reducing

the drying temperature.

Not combinable with Rapid and Steam option.

Rapid

Enables quicker drying.

Not combinable with Gentle and Steam option.

FUNCTIONS

End of cycle signal

To switch on and o the signal tone at the end of the

programme.

Key lock

To lock the keys and the knob of the control panel against

unwanted operation.

To lock the keys:

• The dryer must be switched on.

• Press and hold the Key lock button « until the button lights

up. Knob and keys are locked now.

Only the On/O button works.

If you switch the dryer o and on again, the key lock will

remain active until you unlock it.

To unlock the keys:

• Press and hold the Key lock button until the button light

goes o.

Start delay

Moves the start of your programme to a later time.

Choose a delay up to 23 hours.

• Select programme and options.

• Press the Start delay button « – the Start delay symbol on

the display blinks.

• Turn the knob to select a delay up to 23 hours, which will

be shown on the display. Press the knob to conrm.

• Press Start / Pause - the display shows the countdown of

the delay until start of the programme. The Start / Pause

button lights up. A sound by activation of the pump may

occur.

• After the delay has expired, the dryer starts automatically.

The display then indicates the remaining programme

duration.

To cancel the Start delay

• Press Start / Pause to cancel the start delay (and press Start

/ Pause again to start the selected programme immediately).

INDICATORS

Water tank full

(=> empty water tank)

Bottom lter clogged

(=> clean bottom lter).

Door lter clogged

(=> clean door lter)

In case of any failures, refer to section

TROUBLESHOOTING in the USE AND CARE GUIDE.

EMPTY WATER TANK AFTER EACH DRYING CYCLE

Hold the handle and carefully pull out the water tank. Hold the full

water tank with both hands.

Empty the water and insert the container by pushing it back into

place. Make sure that it is properly inserted.

CLEAN DOOR FILTER AFTER EACH DRYING CYCLE

Open the door and remove the door lter by pulling it upwards.

Press the button to open the door lter. Remove the lint inside.

Close the lter and reinsert it in the right direction, so that it

completely integrates in the lter chamber.

CLEAN THE BOTTOM FILTER ABOUT EVERY THREE MONTHS

Open the bottom ap. Turn the locking bars right and left on the

bottom lter downwards in horizontal position. Hold the bottom

lter on the handle and pull it out.

Clean the bottom lter under running water; wipe away dust and

lint.

Clean the lter chamber of the dryer with a damp cloth or carefully

with a vacuum cleaner. Insert the bottom lter again. Turn the

locking bars upwards in vertical position. Close the bottom ap.

CARE AND MAINTENANCE

Switch o and unplug the

dryer before doing any

cleaning and maintenance.

Caution, the water in the

water tank can still be hot.

WARNING

400010765167

Whirlpool is a registered trademark of Whirlpool, USA

001

MAINTENANCE AND CLEANING

AND TROUBLESHOOTING

Refer to the Use and Care Guide.

The Use and Care Guide can be obtained as

follows:

• After-Sales Service; using the phone number in

the warranty booklet

• Download from the Whirlpool website

http://docs.whirlpool.eu

CONTACTING AFTER-SALES SERVICE

Provide both numbers shown on the service sticker inside the door

when contacting the After-Sales Service team.

http://www.whirlpool.eu

The phone number can be found in the warranty booklet.

Table of contents

Other Whirlpool Dryer manuals

Whirlpool

Whirlpool LE5700XP User manual

Whirlpool

Whirlpool WED7800XB0 User manual

Whirlpool

Whirlpool LER2614EW1 User manual

Whirlpool

Whirlpool Vantage WGD7990XG User manual

Whirlpool

Whirlpool LEB6400LW0 User manual

Whirlpool

Whirlpool Gold YGEQ9800PW2 User manual

Whirlpool

Whirlpool WGD8127LC User manual

Whirlpool

Whirlpool LER3624PQ User manual

Whirlpool

Whirlpool PROD 06SCII User manual

Whirlpool

Whirlpool Duet Steam User manual

Whirlpool

Whirlpool GEW9250PT User manual

Whirlpool

Whirlpool WED6200SW1 User manual

Whirlpool

Whirlpool 4.3 CU FT User manual

Whirlpool

Whirlpool LE6685XP User manual

Whirlpool

Whirlpool BYCCD3421W0 User manual

Whirlpool

Whirlpool WGD5700V - 7.0 Cu Ft Manual

Whirlpool

Whirlpool LER5848DQ0 User manual

Whirlpool

Whirlpool Commercial Dryer User manual

Whirlpool

Whirlpool WGD70HEBW User manual

Whirlpool

Whirlpool WED97HEXL0 User manual

Whirlpool

Whirlpool LEV4634JQ0 User manual

Whirlpool

Whirlpool WGD97HEDC0 User manual

Whirlpool

Whirlpool Gold GGQ9800PW3 User manual

Whirlpool

Whirlpool 7MWGD1750EQ User manual

Popular Dryer manuals by other brands

Bosch

Bosch WTA79200GB Installation and operating instructions

Amana

Amana W10233410A Use and care guide

Miele

Miele TWH 780 WP operating instructions

Asko

Asko T760 user guide

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Original instructions

Bosch

Bosch Logixx 10 WTB76556GB Instruction manual and installation instructions

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Operation and installation

Electrolux

Electrolux EW2H328R2 user manual

Beko

Beko DS8433RX1M user manual

Dawlance

Dawlance Spinner DS 6000 C owner's manual

Electrolux

Electrolux TP5080TW user manual

AEG

AEG TR838P4OB user manual

Indesit

Indesit IDV 75 instruction manual

Infiniton

Infiniton SD-DG85C manual

BOMANN

BOMANN WT 5019 instruction manual

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Installation

Asko

Asko T793C operating instructions

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer installation instructions