Whirlpool Inglis User manual

DRYER USER INSTRUCTIONS

Assistance or Service

If you need assistance or service, first see the “Troubleshooting”

section. Additional help is available by calling our Customer

Interaction Center at 1-800-253-1301 from anywhere in the

U.S.A., or write:

Whirlpool Corporation

Customer Interaction Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

To order parts and accessories, call 1-800-442-9991 or visit our

website at www.whirlpool.com.

Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation

date for in-warranty service.

Write down the following information about your appliance to help

you obtain assistance or service if you ever need it. You will need

to know your complete model number and serial number. You can

find this information on the model and serial number label, located

at the top inside dryer door well.

Dealer name____________________________________________________

Serial number __________________________________________________

Address ________________________________________________________

Phone number__________________________________________________

Model number __________________________________________________

Purchase date __________________________________________________

DRYER SAFETY

Table of Contents

ASSISTANCE OR SERVICE ............................ 1

DRYER SAFETY............................................... 1

DRYER USE...................................................... 3

DRYER CARE................................................... 5

TROUBLESHOOTING...................................... 5

WARRANTY...................................................... 8

8546085

You can be killed or seriously injured if you don't immediately

You can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions,

including the following:

WARNING:

■

Read all instructions before using the dryer.

■

Do not place items exposed to cooking oils in your dryer.

Items contaminated with cooking oils may contribute to

a chemical reaction that could cause a load to catch fire.

■

Do not dry articles that have been previously cleaned in,

washed in, soaked in, or spotted with gasoline, dry-

cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

■

Do not allow children to play on or in the dryer. Close

supervision of children is necessary when the dryer is

used near children.

■

Before the dryer is removed from service or discarded,

remove the door to the drying compartment.

■

Do not reach into the dryer if the drum is moving.

■

Do not repair or replace any part of the dryer or attempt

any servicing unless specifically recommended in this

Use and Care Guide or in published user-repair instruc-

tions that you understand and have the skills to carry out.

■

Do not use fabric softeners or products to eliminate static

unless recommended by the manufacturer of the fabric

softener or product.

■

Do not use heat to dry articles containing foam rubber or

similarly textured rubber-like materials.

■

Clean lint screen before or after each load.

■

Keep area around the exhaust opening and adjacent sur-

rounding areas free from the accumulation of lint, dust,

and dirt.

SAVE THESE INSTRUCTIONS

■

The interior of the dryer and exhaust vent should be

cleaned periodically by qualified service personnel.

■

Do not install or store the dryer where it will be exposed

to the weather.

■

Do not tamper with controls.

■

See installation instructions for grounding requirements.

WARNING: For your safety, the information in this manual must be followed to minimize

the risk of fire or explosion, or to prevent property damage, personal injury, or death.

–Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance.

–WHAT TO DO IF YOU SMELL GAS:

•Do not try to light any appliance.

•Do not touch any electrical switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

•If you cannot reach your gas supplier, call the fire department.

–Installation and service must be performed by a qualified installer, service agency, or

the gas supplier.

•Clear the room, building, or area of all occupants.

Checking Your Vent

Your dryer must be properly installed and vented to achieve

maximum drying efficiency and shorten drying times. Use the

minimum recommended installation clearances found in your

Installation Instructions. See the Installation Instructions for more

information.

If the dryer is not properly installed and vented, it will not be

covered under the warranty.

NOTE: Service calls caused by improper venting will be paid for

by the customer, whether it was a paid installation or self-

installed.

1. Do not use plastic vent or metal foil vent. Use 4 in. (10.2 cm)

metal or flexible metal vent. Do not kink or crush flexible metal

vent. It must be completely extended to allow adequate

exhaust air to flow. Check vent after installation. Refer to your

Installation Instructions for proper length requirements of vent.

2. Use a 4 in. (10.2 cm) exhaust hood.

3. Use the straightest path possible when routing the vent.

4. Use clamps to seal all joints. Do not use duct tape, screws or

other fastening devices that extend into the interior of the vent

to secure vent.

5. Clean exhaust vent periodically, depending on use, but at

least every 2 years, or when installing your dryer in a new

location. When cleaning is complete, be sure to follow the

Installation Instructions supplied with your dryer for final

product check.

DRYER USE

Load clothes loosely into the dryer. Do not pack the dryer. Allow space for clothes to tumble freely. The following charts show examples

of balanced loads that would allow for proper tumbling.

WARNING

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death

or fire.

EXTRA LARGE CAPACITY DRYERS

Heavy Work Clothes

3 pair of pants

4 pair of jeans

2 pair of overalls

3 shirts

Mixed Load

3 double sheets

4 pillowcases

8 T-shirts

6 pair of shorts

2 blouses

8 handkerchiefs

Towels

10 bath towels

10 hand towels

14 washcloths

1 bath mat

Delicates

3 camisoles

1 robe

4 slips

6 undergarments

2 sets of sleepwear

1 child’s outfit

Starting Your Dryer

This booklet covers several different models. Your dryer may not

have all of the cycles and features described.

Before using your dryer, wipe the dryer drum with a damp cloth to

remove dust from storing and shipping.

1. Load clothes loosely into the dryer and close the door. Do not

pack the dryer. Allow space for clothes to tumble freely.

2. Turn the Cycle Selector Control to the recommended cycle for

the type of load being dried. Use the Energy Preferred

Automatic Setting, called out by an asterisk (*) to dry most

heavy to medium weight fabrics.

Temperature is included in the cycle selections. See “Dryer

Cycle Descriptions”(separate sheet) for temperature

suggestions.

3. If desired, add a fabric softener sheet. Follow package

instructions.

4. Press PUSH TO START.

Stopping and Restarting

You can stop your dryer anytime during a cycle.

To stop your dryer

Open the dryer door or turn the Cycle Selector Control to OFF.

NOTE: The Cycle Selector Control should point to an Off area

when the dryer is not in use.

To restart your dryer

1. Close the door.

2. Select a new cycle (if desired).

3. Press PUSH TO START.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in death,

explosion, or fire.

WARNING

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Items containing foam, rubber, or plastic must be dried

on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in death

or fire.

DRYER CARE

Cleaning the Dryer Location

Keep dryer area clear and free from items that would obstruct the

flow of combustion and ventilation air.

Cleaning the Lint Screen

Clean the lint screen before each load. A screen blocked by lint

can increase drying time.

IMPORTANT:

■Do not run the dryer with the lint screen loose, damaged,

blocked, or missing. Doing so can cause overheating and

damage to both the dryer and fabrics.

■If lint falls off the screen into the dryer during removal, check

the exhaust hood and remove the lint.

Every Load Cleaning

1. Pull the lint screen toward you.

2. Roll lint off the screen with your fingers. Do not rinse or wash

screen to remove lint. Wet lint is hard to remove.

3. Push the lint screen firmly back into place.

As Needed Cleaning

1. Roll lint off the screen with your fingers.

2. Wet both sides of lint screen with hot water.

3. Wet a nylon brush with hot water and liquid detergent. Scrub

lint screen with the brush to remove residue buildup.

4. Rinse screen with hot water.

5. Thoroughly dry lint screen with a clean towel. Replace screen

in dryer.

Cleaning the Dryer Interior

1. Apply a nonflammable household cleaner to the stained area

of the drum and rub with a soft cloth until stain is removed.

2. Wipe drum thoroughly with a damp cloth.

3. Tumble a load of clean cloths or towels to dry the drum.

NOTE: Garments which contain unstable dyes, such as denim

blue jeans or brightly colored cotton items, may discolor the dryer

interior. These stains are not harmful to your dryer and will not

stain future loads of clothes. Dry unstable dye items inside-out to

prevent dye transfer.

Removing Accumulated Lint

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often, depending

on dryer usage. Cleaning should be done by a qualified person.

From Inside the Exhaust Vent

Lint should be removed every 2 years, or more often, depending

on dryer usage.

TROUBLESHOOTING

First try the solutions suggested here and possibly avoid the cost of a service call...

Dryer Operation

Dryer will not run

■Check the following:

Is the power cord plugged in?

Has a fuse blown, or has a circuit breaker tripped? There

may be 2 fuses or circuit breakers for the dryer. Check to

make sure both fuses are intact and tight, or that both circuit

breakers have not tripped.

Was a regular fuse used? Use a time-delay fuse.

Is the dryer door firmly closed?

Was the Start button firmly pressed?

Is a cycle selected?

No heat

■Has a fuse blown, or a circuit breaker tripped? Electric

dryers use 2 household fuses or breakers. The drum may be

turning, but you may not have heat.

■Has an air dry cycle been selected? Select the right cycle

for the types of garments being dried.

■For gas dryers, is the valve open on the supply line?

Unusual sounds

■Has the dryer had a period of non-use? If the dryer hasn’t

been used for a while, there may be a thumping sound during

the first few minutes of operation.

■Is it a gas dryer? The gas valve clicking is a normal operating

sound.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Place dryer at least 18 inches (46 cm) above the floor

for a garage installation.

Failure to do so can result in death, explosion, or fire.

Dryer Results

Clothes are not drying satisfactorily

■Check the following:

Is the lint screen clogged with lint?

Is the exhaust vent or outside exhaust hood clogged with lint,

restricting air movement? Run the dryer for 5-10 minutes.

Hold your hand under the outside exhaust hood to check air

movement. If you do not feel air movement, clean exhaust

system of lint or replace exhaust vent with heavy metal or

flexible metal vent. See your Installation Instructions.

Is the exhaust vent crushed or kinked? Replace with heavy

metal or flexible metal vent. See your Installation Instructions.

Are fabric softener sheets blocking the grille? Use only one

fabric softener sheet, and use it only once.

■Is the dryer located in a room with temperature below

45ºF (7ºC)? Proper operation of dryer cycles requires

temperatures above 45ºF (7ºC).

■Was a cold rinse water used? Was the load very wet?

Expect longer drying times with items rinsed in cold water and

with items that hold moisture (cottons).

■Is the load too large and heavy to dry quickly? Separate the

load to tumble freely.

Lint on load

■Is the lint screen clogged? Clean lint screen. Check for air

movement.

■Is the load properly sorted? Sort lint givers (towels, chenille)

from lint takers (corduroy, synthetics). Also sort by color.

■Is the load too big or too heavy? Dry smaller loads so lint

can be carried to the lint screen.

■Was the load overdried? Use correct dryer settings for load

type. Overdrying can cause lint-attracting static electricity.

See “Dryer Cycle Descriptions”(separate sheet).

■Was paper or tissue left in pockets?

■Is pilling being mistaken for lint? Pilling (surface fuzz) is

caused by normal wear and laundering.

Stains on load or color change

■Was dryer fabric softener properly used? Add dryer fabric

softener sheets at the beginning of the cycle. Fabric softener

sheets added to a partially-dried load can stain your

garments.

■Were items soiled when placed in the dryer? Items should

be clean before being dried.

■Were items properly sorted? Sort light colors from dark

colors. Sort colorfast items from noncolorfast items.

Items shrinking

■Was the dryer overloaded? Dry smaller loads that will tumble

freely.

■Did the load overdry? Check the manufacturer’s care label.

Match dryer setting to load type.

Loads are wrinkled

■Was the load removed from dryer at the end of the cycle?

■Was the dryer overloaded? Dry smaller loads that can

tumble freely.

■Did the load overdry? Check the manufacturer’s care label.

Match dryer setting to load type.

Odors

■Have you recently been painting, staining or varnishing in

the area where your dryer is located? If so, ventilate the

area. When the odors or fumes are gone from the area, rewash

and dry the clothing.

■If the dryer is electric, is it being used for the first time?

The new electric heating element may have an odor. The odor

will be gone after the first cycle.

Garment damage

■Check the following:

Were zippers, snaps, and hooks left open?

Were strings and sashes tied to prevent tangling?

Were care label instructions followed?

Were items damaged before drying?

Notes

INGLIS™ DRYER WARRANTY

ONE-YEAR FULL WARRANTY

For one year from the date of purchase, when this dryer is operated and maintained according to instructions attached to or furnished

with the product, Whirlpool Corporation will pay for FSP®replacement parts and repair labor costs to correct defects in materials or

workmanship. Service must be provided by a Whirlpool designated service company.

Whirlpool Corporation will not pay for:

1. Service calls to correct the installation of your dryer, including venting. Heavy 4 in. (10.2 cm) metal exhaust vent must be used. Refer

to the venting section of this manual and your Installation Instructions.

2. Service calls to instruct you how to use your dryer, to replace house fuses or correct house wiring or reset circuit breakers, or to

replace owner accessible light bulbs.

3. Repairs when your dryer is used in other than normal, single-family household use.

4. Damage resulting from accident, alteration, misuse, abuse, fire, floods, acts of God, improper installation (including, but not limited

to, venting with plastic or flexible foil), installation not in accordance with local electrical and plumbing codes, or use of products not

approved by Whirlpool Corporation.

5. Replacement parts or repair labor costs for units operated outside the United States.

6. Pickup and delivery. This product is designed to be repaired in the home.

7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not

apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Outside the 50 United States, this warranty does not apply. Contact your authorized Inglis dealer to determine if another

warranty applies. 9/03

Replacement parts

If you need to order replacement parts, we recommend that you

only use FSP®factory specified parts. These parts will fit right

and work right because they are made with the same precision

used to build every new INGLIS™appliance.

To locate FSP replacement parts in your area:

Call the Customer Interaction Center at 1-800-253-1301, or your

nearest designated service center.

For information on how to contact Whirlpool Corporation, please

see front page of this document.

8546085

Printed in U.S.A.

Table of contents

Other Whirlpool Dryer manuals

Whirlpool

Whirlpool WGD5900SB0 User manual

Whirlpool

Whirlpool W10858720B - SP User manual

Whirlpool

Whirlpool Cabrio,- WGD5500X Parts list manual

Whirlpool

Whirlpool WGD94HEX Manual

Whirlpool

Whirlpool WGD9500T User guide

Whirlpool

Whirlpool WGD7800XB0 User manual

Whirlpool

Whirlpool DryAire LMA1053L User manual

Whirlpool

Whirlpool WED9150 User manual

Whirlpool

Whirlpool CSP2761TQ User manual

Whirlpool

Whirlpool AWD712S2 User manual

Whirlpool

Whirlpool WGD9151YW User manual

Whirlpool

Whirlpool WGD88HEA User manual

Whirlpool

Whirlpool LEV6634BW0 User manual

Whirlpool

Whirlpool YWED9550WR0 User manual

Whirlpool

Whirlpool WGD4910XQ User manual

Whirlpool

Whirlpool W10529641A User manual

Whirlpool

Whirlpool WED8500DC User manual

Whirlpool

Whirlpool W10184516C User manual

Whirlpool

Whirlpool W10388777A User manual

Whirlpool

Whirlpool GCEM2990TQ User manual

Whirlpool

Whirlpool HFCX80410 Installation guide

Whirlpool

Whirlpool LE9800XP User manual

Whirlpool

Whirlpool WED4950HW User manual

Whirlpool

Whirlpool Gold YGEQ9800PW2 User manual

Popular Dryer manuals by other brands

Bosch

Bosch WTA79200GB Installation and operating instructions

Amana

Amana W10233410A Use and care guide

Miele

Miele TWH 780 WP operating instructions

Asko

Asko T760 user guide

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Original instructions

Bosch

Bosch Logixx 10 WTB76556GB Instruction manual and installation instructions

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Operation and installation

Electrolux

Electrolux EW2H328R2 user manual

Beko

Beko DS8433RX1M user manual

Dawlance

Dawlance Spinner DS 6000 C owner's manual

Electrolux

Electrolux TP5080TW user manual

AEG

AEG TR838P4OB user manual

Indesit

Indesit IDV 75 instruction manual

Infiniton

Infiniton SD-DG85C manual

BOMANN

BOMANN WT 5019 instruction manual

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Installation

Asko

Asko T793C operating instructions

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer installation instructions