Whirlpool TA07002F0 User manual

ROOMAIRCONDITIONERS

Use&CareGuide

1. Air louvers

2. Air direction tab

3. Front panel (some models have

a different style front panel)

4. Control panel

5. Side curtains (on some models)

PART NO. 1166976

Contents

Page

A Note to You ................................................................... 2

Air Conditioner Safety .................................................... 3

Important Safety Instructions ......................................... 3

Operating Instructions .................................................... 4

Starting your air conditioner ................................... 4

Using the exhaust control (on some models). ...... 5

Using the ENERGY SAVER settings

(on some models) ..................................................... 5

Changing air direction ............................................. 5

A Note to You

Thank you for buying this appliance.

To ensure you enjoy years of trouble-free operation, we

developed this Use and Care Guide. It contains valuable

information about how to operate and maintain your

appliance properly and safely. Please read it carefully.

Also, please complete and mail the Product Registration

Card provided with your appliance. This card helps us

notify you about any new information on your appliance.

Page

Cleaning Instructions ...................................................... 6

Cleaning the front panel ........................................... 6

Cleaning the air filter ................................................ 6

Performing Annual Maintenance ................................... 7

Repairing paint damage ........................................... 6

Normal operating sounds ........................................ 6

Troubleshooting .............................................................. 9

Requesting Assistance or Service.. ............................. 11

Ordering accessories ............................................. 1-i

Warranty ......................................................................... 12

Please record your model’s information.

Whenever you call to request service on your appliance,

you need to know your complete model number and

serial number. You can find this information on the model

and serial number label. (See fnstallation Instructions for

model and serial number location.)

Please record the model and serial number information

below. Also, record the purchase date of your appliance

and the store’s name, address, and telephone number.

Model Number Store Name

Serial Number Store Address

Purchase Date Store Phone

Keep this book and sales slip together in a safe place for future reference.

Air Conditioner Safety

Your safety is important to us.

This guide contains safety symbols and statements.

Please pay special attention to the symbols and follow any

instructions given. Here is a brief explanation of the use of

the symbol:

This symbol alerts you to hazards such as

f fire, electrical shock, or other injuries.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

- To reduce the risk of fire, electric shock, or injury when using your air conditioner, follow these

basic precautions:

Plug into a grounded 3 prong outlet.

Unplug air conditioner before servicing.

Do not remove ground prong.

Use two or more people to move or install

Do not use an adapter. air conditioner.

Do not use an extension cord.

Do not drink water collected inside the cabinet.

- SAVE THESE INSTRUCTIONS -

It is your responsibility to:

Install the unit in a window that will hold the weight and

secure it according to the Installation Instructions.

Connect the unit only to the proper kind of outlet, with the

correct electrical supply and grounding. (Refer to “Meet-

ing electrical requirements” in the Installation Instructions).

Make sure the unit is the correct size for the area you

want to cool.

Operating

Instructions

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in

death, fire, or electrical shock.

Starting your air conditioner

See Figures 1-6

for control panel variations. This manual

covers several different models. The model you have pur-

chased may have all or some of the control panel variations

shown here, and they may not match the illustration exactly.

Set the Fan or System Control to the desired setting.

HI/HIGH COOL/

QUICK COMFORT .........................for maximum cooling

MED/MEDIUM COOL ......................... for normal cooling

LO/LOW COOL ............................... for sleeping comfort

FAN ONLY (on some models) .............. for circulating air

without cooling

The Fan or System Control settings determine the

amount of cool air coming from the louvers.

NOTES:

Set the Exhaust Control (on some models) to

CLOSED or maximum cooling.

Set the control switch to COOL (on some models) for

cooling.

2. Turn the Thermostat to a mid-setting. For maximum

cooling, turn the Thermostat clockwise. For less cooling,

turn the Thermostat counterclockwise. Experiment and

find the setting that suits you best.

NOTES:

If you turn the air conditioner off, wait at least 3 minutes

before turning it back on. This prevents the air condi-

tioner from blowing a fuse or tripping a circuit breaker.

Do not try to operate your air conditioner when

the outside temperature is below 65°F (18%). The

inside evaporator coil may freeze up and the air

conditioner may not operate properly.

Using the exhaust control

(on some models)

The Exhaust Control allows you to circulate room air or

exhaust stale/smoky air.

To circulate room air (Figure

7) set Exhaust Control to

CLOSED.

To exhaust stale/smoky air

set Exhaust Control to

OPEN.

Exhaust control tips

For maximum cooling efficiency, set the Exhaust Control

to CLOSED.

The Exhaust Control will only function when the System

or Fan Control is turned to an “on” setting.

Using the ENERGY SAVER

settings

(on some models)

The ENERGY SAVER settings are located on the System

Control (QUICK COMFORT/HI, MED, and LO). See

Figures 8 and

9. When these settings are selected, the

fan will cycle on and off as the Thermostat Control turns

the compressor on and off. This saves the cost of electrical

energy that would be used to run the fan continuously.

It is normal for the fan to turn on and off in the ENERGY

SAVER settings. The amount of time the unit will be off

depends on the room temperature and Thermostat

Control setting.

Energy saving tips

You can help save energy by reducing your air

conditioner’s work load:

Improve your home’s insulation. Seal doors and win-

dows. Close fireplace flue.

Close blinds or drapes on the sunny side of your house.

Add awnings.

Check air filter often to make sure it is clean.

Do not block airflow with drapes or furniture.

Ventilate your attic. High temperatures in the attic add to

the cooling load of your air conditioner.

Try not to use heat-producing appliances during the

hottest part of the day.

Turn lights and appliances off when they are not needed.

Keep heat registers and cool-air returns closed.

Use exhaust/venting fans while cooking, bathing, and

doing laundry.

Changing air direction

The louvers in the top of the front panel allow you to control

the direction of the cooled air. Use the tabs to direct the air

right, left, or straight ahead.

See Figure 10.

Cleaning

Instructions

It is necessary to clean your air filter and front panel properly

for top performance and cleaner air.

Cleaning the front panel

2. Remove the front panel from the cabinet for easy clean-

ing. Press down on the top of the front panel and tilt

forward. Lift the front panel up and away from the bottom

spring clips.

See Figure 11.

Unplug the power cord.

3. Remove the air filter and clean it separately if needed.

(See “Cleaning the air filter” below.)

NOTE:

On some models with a slide-out air filter, you can

remove the air filter without removing the front panel.

4. Using a soft cloth, clean the front panel with warm water

and a mild soap or detergent. Rinse and dry thoroughly.

Wipe the control panel with a soft, dry cloth.

5. Replace the front panel. Set the bottom of the panel on

the cabinet spring clips. Push down and forward into the

cabinet to secure upper tabs.

6. Plug in the power cord.

Cleaning the air filter

Your air conditioner’s air filter is removable for easy clean-

ing. A clean filter helps remove dust, lint, and other particles

from the air and is important for best cooling and operating

efficiencv. Check the filter everv 2 weeks to see if it needs

cleaning: Do not operate the ai; conditioner without the filter

in place.

For models with built-in filters (see figure 12):

Unplug the power cord.

2. Remove the front panel from the cabinet. (See “Cleaning

the front panel” above.)

3. Remove the elastic band holding the air filter in place.

Then remove the air filter.

4. Wash the air filter with warm water and mild detergent.

Do not wash the air filter in the dishwasher or use any

chemical cleaners.

Air dry thoroughly before

replacing to ensure maximum efficiency.

5. Replace the filter, elastic band, and front panel.

6. Plug in the power cord.

For models with slide-out filters (see figure 13):

4. Slide out the air filter up and out the top of the front panel.

2. Clean the filter using a vacuum cleaner attachment or

wash it in warm water and a mild detergent. Do not wash

the air filter in the dishwasher or use any chemical

cleaners.

Air dry thoroughly before replacing to

ensure maximum efficiency.

3. Slide the air filter back down in the opening in the top of

the front panel.

Air filter tips

Your air filter should be replaced once a year.

For information on ordering a new filter, see page 11.

Performina Annual

Maintenanvce

Excessive Weight Hazard

Use two or more people to move and install

air conditioner.

Failure to do so can result in back or other injury.

Electrical Shock Hazard

Unplug before doing any maintenance.

Do not drink water collected by the air conditioner.

Failure to follow these instructions can result in

death, electrical shock, or sickness.

Your air conditioner needs annual maintenance to help

ensure steady, top performance throughout the year. Call

your local authorized dealer to schedule annual mainte-

nance. The expense of this service is the consumer’s

responsibility.

068

If you are familiar with electrical appliances, you can do

the maintenance yourself. If you choose to do so, follow

these steps:

NOTE:

Do not lift, push, or pull any gray Styrofoam from

inside the air conditioner.

Unplug the power cord.

2. Remove the air conditioner from the window.

continued on next page

3. Remove the front panel. (See “Cleaning the front

panel” on page 6.)

4. Remove the side curtains (on some models). Slide

curtains out to fullest width. From the back side,

remove the Phillips-head screws which attach the

curtain to the cabinet

(A). See Figure 14.

5. Remove slotted-hex head screws

(B)

holding top

channel.

See Figure 14.

6. Remove slotted-hex head screws (C) on sides of

cabinet.

See Figure 14.

7. Holding the cabinet on both sides, carefully lift cabinet

off base. Watch out for the sharp metal fins on the

front and rear coils.

8. Wrap the fan motor

(E),

capacitor terminals

(F),

electrical control panel

(I),

and compressor terminals

(J),

in plastic film and make sure no water or other liquid

gets inside any of these parts. It could damage the

insulation and cause serious mechanical problems.

See Figure 15.

9. Carefully clean and hose out the base

(K),

condenser

coil (D), evaporator coil (G), and condensate pan

(H).

Clean at least once a year or more often if the con-

denser and evaporator coils and pan collect dirt, sand,

leaves, insects, or algae. Also, clean if you detect an

odor coming from the air conditioner. SW

Figure 15.

10.

Remove the plastic film from the motor and electrical

parts.

11.

Replace the cabinet on the air conditioner and reattach

the front panel, top channel, and side curtains. Tighten

all screws.

12. Plug in the power cord.

NOTE:

It is a good idea to wait 24 hours before starting

the air conditioner again. This allows time for all areas

to dry out.

Repairing paint damage

Check once or twice a year for paint damage. This may

occur, especially in salty environments (near oceans, etc.)

or where rust is a problem. If needed, touch up with a good

grade enamel paint.

NOTE:

To reduce paint damage during the winter, install

a heavy-duty cover on your air conditioner’s cabinet. For

information on ordering a heavy-duty cover see page 11.

Normal operating sounds

When your air conditioner is operating normally, you may

hear such sounds as:

A “pinging” sound caused from water droplets hitting the

condenser. This is an energy efficient design whereby

the water cools the condenser.

Air movement from the fan.

Clicks from the thermostat cycling on and off.

Vibrations or noise due to poor wall or window

construction.

A high pitched hum or pulsating noise caused by the

modern high efficiency compressor cycling on and off.

Troubleshooting

You can solve many common air conditioner problems easily, saving you the cost of a service call. Try the suggestions

below to see if you can solve your problem without outside help.

Your air conditioner will not operate

A household fuse

has blown or circuit

breaker has tripped.

The Fan Control is

turned to the OFF

The local power has

Then ...

Firmly plug the cord into a live outlet with proper voltage.

Replace the fuse or reset the circuit breaker. Make sure the air conditioner is plugged into a

properly grounded outlet as described in the Installation Instructions.

Turn the Fan Control to an active setting.

Wait for power to be restored.

The unit blows fuses or trips circuit breakers

your local utility company for the correct capacity.

conditioner too soon

The air conditioner seems to run too much

Check if ...

The current air

conditioner replaced

an older model.

Then ...

The use of more efficient components may cause the air conditioner to run longer than

an older model, but the total energy consumption will be less. Newer air conditioners do not

emit the “blast” of cold air you may be accustomed to from older units, but this IS NOT an

indication of lesser cooling capacity or efficiency. Refer to the efficiency rating (EER) and

capacity rating (in BTUs/hr.) marked on the air conditioner.

The unit is in a

heavily occupied

room or heat-

producing

appliances are in

use in the room.

Use exhaust vent fans while cooking or bathing and try not to use heat-producing appli-

antes during the hottest part of the day. A higher capacity air conditioner may be required

depending on the size of the room being cooled.

The unit turns on and off too much, or does not cool room

e room you are

Adjust the Thermostat to a cooler setting by turning the knob clockwise.

Turn Fan Control to HIGH.

loner In a more s

installed on the sunny

Water drips from cabinet into your house

Check if ... 1 Then ...

The air conditioner is

not properly leveled.

The air conditioner

should slope slightly

downward toward the

outside.

Level the air conditioner to provide a 77 downward slope toward the outside (l/2bubble

on a carpenter’s level [or 1.l degrees]) to ensure proper drainage. See the Installation

Instructions for an illustration. Reposition or shim the cabinet as necessary.

NOTE:

Do NOT drill a hole in the bottom of the metal base and condensate pan.

Table of contents

Other Whirlpool Air Conditioner manuals

Whirlpool

Whirlpool ATE0743SPP Quick start guide

Whirlpool

Whirlpool ROOM AIR CONDITIONER User manual

Whirlpool

Whirlpool WAHMS User manual

Whirlpool

Whirlpool PORTABLE AIR CONDITIONER User manual

Whirlpool

Whirlpool ACD052MM0 User manual

Whirlpool

Whirlpool CA25WC50 Operation manual

Whirlpool

Whirlpool AMD 018 User manual

Whirlpool

Whirlpool AMAP050BW User manual

Whirlpool

Whirlpool SPIW409A2WF User manual

Whirlpool

Whirlpool AR1230XA0 User manual

Whirlpool

Whirlpool ACQ082 User manual

Whirlpool

Whirlpool 819052092 Assembly instructions

Whirlpool

Whirlpool WA6059Q User manual

Whirlpool

Whirlpool ACE082XS0 User manual

Whirlpool

Whirlpool WA9260Q User manual

Whirlpool

Whirlpool AMD 302 User manual

Whirlpool

Whirlpool ACU129PR Assembly instructions

Whirlpool

Whirlpool YACQ088XP0 User manual

Whirlpool

Whirlpool 1188908 Assembly instructions

Whirlpool

Whirlpool ACQ189XR1 User manual

Whirlpool

Whirlpool ACS102PP0 User manual

Whirlpool

Whirlpool SWA1040Q User manual

Whirlpool

Whirlpool ACPE102PS2 User manual

Whirlpool

Whirlpool AMAP151BW User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual