Vivotek IP7142 User manual

EN-1

English

Warning Before Install

Contact your distributor when

such cases happen.

Refer to your user's manual for the

operating temperature.

Power off the Network Camera

as soon as it is found smoking or

smelt unusual.

Do not touch the Network Camera

when it's lightening.

Do not place the Network Camera

on unsteady surfaces.

Do not drop the Network Camera.

Do not insert any object into the

Network Camera, such as needles.

EN-2

Package Contents

Software CD

IP7142

Screws

Warranty card

RJ45 female/female coupler Quick installation guide

Camera stand

Sun Shield

Power adapter Silica gel

Silica gel

EN-3

English

Physical Description

Connectors

Ethernet 10/100 RJ45 plug

Audio out (green)

Microphone in (pink)

Power cord socket (black)

General I/O terminal block

Earth

Front panel

IR LED

Lens

Reset button

Status LED

Light sensor

EN-4

Hardware Installation

1. Open the lens cover.

2. Secure the Network Camera to the wall/ceiling by the supplied camera stand.

EN-5

English

Network Deployment

POWER C

OLLIS

ION

LINK

CEIVE

ARTITION

12345

1. If you have external devices such as

sensors and alarms, make connections

from general I/O terminal block.

2. Use the supplied RJ45 female/female

coupler to connect the Network Camera

to a switch.

Use Catagory 5 Cross Cable when

Network Camera is directly connected

to PC.

3. Connect the power cable from the

Network Camera to a power outlet.

N.C.

485B

485A

AC24V

N.C.: NoConnector

485B: RS485-

485A: RS485+

AC24V: Power in AC 24V

G N D : Ground

D I : Digital Input

D O : Digital Output

+12V : Power, 12V DC

GND

+12V

General Connection (without PoE)

EN-6

Power over Ethernet (PoE)

When using a non-PoE switch

Use a PoE power injector (optional) to connect between the Network Camera and

a non-PoE switch.

When using a PoE-enabled switch

The Network Camera is PoE-compliant, allowing transmission of power and data

via single Ethernet cable. See the following illustration to connect the Network

Camera to a PoE-enabled switch via Ethernet cable.

POWER COLLISION

LINK

RECEIVE

PARTITION

12345

non-PoE switch

PoE power injector

(optional)

POWER COLLISIO N

LINK

ECEIVE

PARTITION

12345

PoE switch

EN-7

English

1. Install the "Installation Wizard 2" under the Software Utility directory from software CD.

2. The program will conduct analyses on your network environment. After your network is

analyzed, please click on the "Next" button to continue the program.

3. The program will search the VIVOTEK Video Receivers, Video Servers or Network

Cameras on the same LAN.

4. After searching, the main installer window will pop up. Click on the MAC that

matches the one labeled on the side of the camera lens or S/N number on the

label of carton to connect the Internet Explorer to the Network Camera.

0002D17151CD

Model No.: IP7142

P/N: 100043690G

F/W Ver.: 0100G

CARTON OF NO. 01

MAD E I N TAI WAN

!!0!!

Q 't y: 1 PCS

EAN: 4712123671550

S/N: 0002D17151CD

0002D17151CD

Installation

Wizard 2

Assigning IP Address

EN-8

For further setup, please refer to user's manual on the software CD.

Ready to Use

1. Access to the Network Camera from the Internet.

2. Retrieve live video through web browsers or recording software.

3. Unscrew the zoom controller to adjust the

zoom factor. Upon completion, tighten the

zoom controller.

4. Unscrew the focus controller to adjust the

focus range. Upon completion, tighten the

focus controller.

∞

EN-9

English

5. Put the supplied silica gel into the Network Camera and tighten the lens cover. (Please

replace the silica gel with a new one if you open the lens cover after installation.)

Note

If you want to use the supplied sun sheild for outdoor environments, please follow the

steps below to install:

1. Tighten the supplied two screws.

2. Attach the supplied sun shield to the Network Camera and slide it to the desired position.

3. Fix the sun shield with supplied two screws. (Please use different screws for ceiling

mount.)

Silica gel

Ceiling mountWall mount

Other manuals for IP7142

Table of contents

Other Vivotek Security Camera manuals

Vivotek

Vivotek MD8562 User manual

Vivotek

Vivotek FD9391-EHTV User manual

Vivotek

Vivotek IP8130 User manual

Vivotek

Vivotek IP8330 User manual

Vivotek

Vivotek FD7132 User manual

Vivotek

Vivotek PT3113 User manual

Vivotek

Vivotek IP8152 User manual

Vivotek

Vivotek IP7142 User manual

Vivotek

Vivotek Vortex IB639 Series User manual

Vivotek

Vivotek CC8370-HV User manual

Vivotek

Vivotek IP7133 User manual

Vivotek

Vivotek FE9192-H User manual

Vivotek

Vivotek IP6122 User manual

Vivotek

Vivotek 4X-PT7137 User manual

Vivotek

Vivotek SD8333-E User manual

Vivotek

Vivotek FD8133V User manual

Vivotek

Vivotek Supreme IP9165-HT-v2 User manual

Vivotek

Vivotek PZ8121 Operator's manual

Vivotek

Vivotek IP7361 User manual

Vivotek

Vivotek MD8562 User manual

Vivotek

Vivotek FD9371-HTV User manual

Vivotek

Vivotek FD8173-H User manual

Vivotek

Vivotek SD9365-EHL User manual

Vivotek

Vivotek Supreme IP9165-HT-v2 User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications

Lumens

Lumens VC-A50PNW installation guide