Vivotek FD8156 User manual

Other manuals for FD8156

2

This manual suits for next models

1

Table of contents

Other Vivotek Security Camera manuals

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications

Lumens

Lumens VC-A50PNW installation guide

1

Reset button

Microphone

Lens

Lens retention screw

MicroSD card

slot

Status LED

FD8156/8168

Quick Installation Guide

Before you begin:

You can connect the

Ethernet cable to a PC or

laptop for a live view. (See

page 5). Raise the camera

to the estimated position,

and evaluate the eld of

view by turning the mount

bracket and lens.

Shooting

direction

Loosen the retention screw

to change shooting angle.

1. The camera can only be powered by Power

over Ethernet (PoE).

2. The camera can only be installed in an

indoor environment.

NOTE:

Part no.: 625024500G

2

30mm Front mark

Ceiling Mount Procedure:

1. Attach the alignment sticker to

a preferred location, with the

Front mark facing the shooting

direction.

3. Install the mount bracket

using the self-tapping

screws.

2. Drill a 30mm cabling

hole if preferred.

4. Pass the Ethernet cable through the cabling hole or along the

wall. 5. Join the camera with the mount bracket by

sliding it along the grooves to t into place.

Mount

bracket

3

30mm

15mm

Wall Mount Procedure:

1. Attach the mount bracket to the wall-mount bracket, with

the Front mark facing the shooting direction. Note that you

should turn the bracket to aim the Front mark at the shooting

direction.

2. Attach the alignment sticker to a preferred location.

3. Mark the drill holes and drive screws into the wall. Leave

15mm of the screws off the wall surface.

4. If preferred, drill a 30mm cabling hole on the wall.

4

5. Hang the bracket onto the screws. You can then fasten the

screws to wall.

6. Connect the Ethernet cable and pass cable through the

hole. Join the camera with the bracket by sliding it along the

grooves.

5

Connect the camera to a PC or laptop. Install and use the IW2

utility to discover your camera on LAN. Double-click on the

camera entry to open a web session.

If your image appears to be out of focus, use the included focus

adjustment tool to tune the focus.

Tune the focus:

0002D1730202

00-02-D1-73-02-02 192.168.5.151 FD8168

IW2

Browser

6

Press the release button if you should need to re-install the

camera.

Carefully place the tool onto the lens, and turn clockwise or

counter-clockwise to adjust the focus.

Release button

NOTE:

7

This page is intentionally left blank.

8