Vivo STAND-V003E User manual

  

Instruction Manual

Email: [email protected]

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

-  

 

 

Phillips screwdriver

Scan the QR code with your mobile device or follow

the link to helpful videos and specifications related

to this product.

  ! "  #!   #!

$  #!

%  &! '  !

  #!

( ))

-    #&!

* #+

-    #&!

*

-  ,  #&!

-    #&!

( #&

-  "  #&!

( #+

-    #&!

* #&

--.//00 1)/./ - 0

  #! ,  #!   #!

2  #! 3  &! 4  &!

  #!

 ))

5  #!

+ ))

1

)6 .

. #

. &

Slide one pole

clip (H) on the

pole. Add one

dual arm (C).

Choose desired

height and

tighten with Allen

wrench (O).

Use the Allen wrench

(N) to tighten the

screws (K) into the

pole from the bottom

of the base (D).

2

. 

. (

Screw pole connector (G) to pole (E)

and then add pole (F). Use Allen

wrench (M) to tighten down the

grub screws on the pole connector.

Add another cable

management clip.

Slide the single monitor bracket onto the

pole and secure at desired height.

. +

. 7

. 8

Slide monitors onto all brackets.

Add parts (J) and

(I) to secure the

monitors.

Route cables using cable

management clips.

Use the built in adjustment

screws on the brackets to

align your monitors.

For the single

bracket add screw

(L) to secure it.

. * 5. "!

For monitor with curved or recessed back, align spacers (M-F) with

mounting holes in monitor, and secure VESA plate (A) to monitor using

screws (M-B or M-D) and washers (M-E).

For flat back monitor, secure VESA plate (A) to monitor using screws (M-A

or M-C) and washers (M-E).

. * 5. !

3

4

If you do not understand these directions, or if you have

any doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are

no missing or defective parts. Improper installation may

cause damage or serious injury. Do not use this product for

any purpose that is not explicitly specified in this manual.

We cannot be liable for damage or injury caused by

incorrect assembly or inappropriate use.

Email: help@vivo-us.com

Live chat: www.vivo-us.com

Call: 1-800-371- 6 4

For more VIVO products, check out our

website at

www.vivo-us.com.

If any parts are received damaged or defective, please

contact us. We are happy to replace parts to ensure you

have a fully functional product.

96 :

  

Last updated: 4/30/2018

. #

;  

. <

Place Allen wrenches

into slots on clips (H)

for easy access.

Be careful not to extend the arms too far forward or too far backward.

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 