Vivo STAND-SIT1B User manual

Sit to Stand Single Monitor Desk Mount Workstation

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-sit1b

SKU: STAND-SIT1B

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

WARNING!

A (x1)

Keyboard Arm

B(x1)

Clamp

C(x1)

Base

O(x4)

Bolt

P(x1)

3mm Allen Key

N(x4)

Nut

J (x2)

Cable Clip

K (x5)

Rubber Pad

L (x1)

Thumbscrew

M (x1)

Pole

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED

D(x1)

Support Plate

E(x1)

Base Cover

F (x1)

VESA Plate

G(x1)

Monitor Arm

H (x1)

Keyboard Tray

I (x1)

Pad

R(x1)

Wrench

Q(x1)

6mm Allen Key

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

M-A (x4)

M4x12

M-D (x4)

M5x16

M-C (x4)

M5x12

M-B (x4)

M4x16

M-E (x4)

D5 Washer

M-F (x4)

Spacer

ASSEMBLY STEPS

STEP 1

Slide base cover (E) over pole (M).

TOOLS NEEDED

2.2-17.6lbs

(1-8kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

Phillips

Screwdriver

STEP 2

OPTION A: Clamp Installation

Attach five rubber pads (K) to clamp (B). Secure pole (M) to clamp (B) by tightening grub screw in the

clamp using 3mm Allen key (P). Secure clamp to the desktop.

MOUNT

2.2lbs

(1kg)

KEYBOARD

STEP 2 (Continued)

STEP 3

Slide cable management clips (J) and both keyboard arm (A) and monitor arm (G) over top of pole (M)

as shown in diagram. Secure both arms using 6mm Allen key (Q). Attach keyboard tray (H) to arm (A)

using four bolts (O) and four nuts (N). Tighten using wrench (R) and Phillips screwdriver. Place pad (I)

on le or right side of keyboard tray (H).

OPTION B: Grommet Installation

If you are securing the stand to the desktop without clamp (B), use existing grommet hole, or drill a

⅜” (10mm) hole. Attach base (C) to pole (M). Tighten grub screws in base (C) using 3mm Allen key

(P). Attach five rubber pads (K) to the bottom of base (C). Remove screw from top of bolt in clamp

(B) using Phillips screwdriver. Remove hand bolt from clamp and use with Support Plate (D) to attach

pole (M) to desk as shown in diagram.

STEP 4

Attach VESA plate (F) to back of monitor using bolts (M-A, M-B, M-C, M-D) and washers (M-E). For

curved or recessed monitors, spacers (M-F) may be required.

Slide VESA plate (F) onto arm (G). Secure using thumb screw (L) as shown in diagram.

STEP 5

M- E

M- A

M- C

M- E

M- B

M- D

M- F

STEP 6

STEP 7

Adjust tension in both brackets using 6mm Allen key (Q) to hold monitor and keyboard at desired

angles. Run cables through cable management clips (J) and store Allen keys (Q,P) in clips.

Adjust the tension of monitor and keyboard arms using 6mm Allen key (Q). Remove the bottom covers

as shown in diagram and run cables through. Reattach cable cover.

Adjust as Desired

LAST UPDATED: 06/01 /2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 