Vivo MOUNT-PC04L User manual

Large Heavy Duty Under Desk PC Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-pc04l

SKU: MOUNT-PC04L

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2

ASSEMBLY STEPS

STEP 1

PACKAGE CONTENTS

A (x1)

Mount Top

B(x1)

Support Bar

C(x1)

Template

S-A (x2)

M6x10mm

Screw

S-B (x4)

ST5.5x19mm

Screw

T-A (x1)

4mm Allen

Wrench

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may

cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.

Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect

assembly or inappropriate use.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

66lbs

(30kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

TOOLS NEEDED

Phillips

Screwdriver Drill

4mm Drill

Bit

B

A

Connect Mount Top (A) to Support Bar (B). Place your PC into the assembled mount and loosen the

knobs on the top of the PC mount to adjust to the desired width. Install M6x10mm Screws (S-A) when

at desired height. Tight knobs.

T-A

S-A

3

STEP 4 STEP 5

STEP 2 STEP 3

STEP 6

Using Template (C), mark drilling locations on the

underside of the desktop in the desired location.

Slide assemlbed mount into place using the

keyhole slots on the top plate and fully secure

the ST5.5x19mm Screws (S-B) using a Phillips

screwdriver.

Screw in the remaining ST5.5x19mm Screws (S-B)

using phillips head screwdriver.

Use a 5/32 (4mm) drill bit to drills holes 0.6”

(16mm) deep. Screw in ST5.5x19mm Screws (S-B)

inline with the keyhole slots on the mount, using

a phillips head screwdriver, leaving ⅛” (3mm) of

space between the desktop and the screw head.

C

S-B

S-B

Place CPU tower in mount. Adjust support bars if needed.

S-B

LAST UPDATED: 05/08/2023

REV1

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 