Vivo MOUNT-PC01C User manual

Black Under Desk Leg Clamp PC Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-pc01c

SKU: MOUNT-PC01C

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2

PACKAGE CONTENTS

TOOLS NEEDED

WARNING!

Phillips

Screwdriver

A (x1)

Clamp

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

22lbs

(10kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

S-A (x4)

M5x6mm Screw

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

4mm Allen

Wrench

B (x1)

Mount

C (x12)

Pad

T-A (x1)

4mm Allen Wrench

3

ASSEMBLY STEPS

STEP 1

Apply Pads (C) to top, bottom, and side of Mount (B) as shown.

STEP 2

Loosen the sets screws on the either side of Mount (B) using 4mm Allen Wrench (T-A) to adjust the

height.

C

B

B

T-A

4

STEP 3

Insert M5x6mm Screws (S-A) into Clamp (A) leaving a 2mm gap.

STEP 4

Insert the heads of M5x6mm Screws (S-A) with Clamp (A) into the slots in Mount (B).

Slots

S-A

A

S-A

A

B

5

STEP 5

Secure Clamp (A) to Mount (B) using M5x6mm Screws (S-A) in the lower holes. Tighten all screws using

a Phillips screwdriver.

STEP 6

Remove the protective film from Clamp (A) and assemble Clamp (A) to the desk leg by tightening both

knobs.

A

B

S-A

A

6

STEP 7

Loosen two screws on top of Mount (B) and slide side support bracket out to maximum width.

STEP 8

Place PC tower in Mount (B), slide bottom support up until Mount (B) is fit vertically to PC, and tighten

set screws using 4mm Allen Wrench (T-A). Slide the side bracket into place to hold PC, and tighten

screws using a Phillips screwdriver.

B

B

T-A

7

STEP 9

The PC mount is now ready for use.

LAST UPDATED: 05/24/2022

REV1.1

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 