Vivo MOUNT-E-UP44 User manual

Motorized TV Stand with Remote Control

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-e-up44

SKU: MOUNT-E-UP44

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

TOOLS NEEDED

77lbs

(34.93kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

WARNING!

Phillips

Screwdriver

A (x1)

Motorized

Column

B(x1)

TV Plate

C(x2)

VESA Bracket

M-F (x4)

Washer

M-G (x8)

Small

Spacer

M-E (x4)

M8x50

M-A (x4)

M5x14

M-B (x4)

M6x14

M-C (x4)

M6x30

M-D (x4)

M8x30

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED

Drill

D(x4)

M8x15 Bolt

E(x4)

D8 Washer

F (x4)

M8 Lock Nut

G(x8)

5/8” Screw

H(x1)

Control Unit

I(x1)

PowerCord

J(x1)

Remote

M-H (x8)

Big

Spacer

K(x1)

Cable Clip

L(x1)

Adhesive Pad

M(x2)

1/4” Screw

N(x1)

Wrench

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

ASSEMBLY STEPS

STEP 1

Connect the control unit (H) and power cord (I) to the motorized column (A) and plug into a power

outlet.

STEP 2

Raise the column to the maximum height

using the remote (J).

STEP 3

Mount the TV plate (B) at your desired height

using M8x16 bolts (D), D8 washers (E) and M8

lock nuts (F). Tighten with the wrench (N) and

a Phillips screwdriver.

NOTE: The lock nuts and washers MUST

be installed on the front of the TV plate to

prevent the column from binding.

STEP 4

Lower the column to the minimum height using the remote.

STEP 5

Place the column in the cabinet and, making sure the column is sitting perfectly straight and level,

mark drilling locations. Drill 0.6” (15mm) deep holes using a ⅛” (3mm) drill bit.

Please note, if cabinet has a hinged lid, the hinge must be on the back of the cabinet for the lid to be

properly opened by the mount.

STEP 7

Use adhesive pad (L) to mount remote holder

to wall. OR Use 1/4” screws (M) to mount

remote holder to wall.

STEP 6

Separate baseplate from column by removing the lock and pin. Mount baseplate to cabinet floor using

5/8” screws (G). Reinstall column to baseplate, and secure to cabinet wall using 5/8” screws (G).

STEP 8

Place remote in holder when not in use.

STEP 9

OPTION A: Flat Back TV

Mount VESA brackets (C) to back of TV using bolts (M-A or M-B) and washers (M-F).

OPTION B: Curved Back TV

Mount VESA brackets (C) to back of TV using bolts (M-C, M-D, M-E), washers (M-F) and spacers (M-G,

M-H) in one of the combinations shown.

STEP 10

STEP 11

Operate mount using the remote.

Raise column to maximum height using the remote. Install cable clip (K) to side of column. Hang TV

with VESA brackets onto mounting plate. Secure TV by tightening the screws underneath the VESA

brackets. Use the cable clip to organize cables.

LAST UPDATED: 03/05/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 