Vivo DESK-V100EB User manual
Black Electric Single Motor Desk Frame
Follow along step-by-step with our video walk through by scanning
the QR code with your mobile device or by following the product
link: vivo-us.com/products/desk-v100eb
Instruction Manual
SKU: DESK-V100EB
ASSEMBLY VIDEO AVAILABLE:
309-278-5303
Contact Us First!
PERSONABLE CUSTOMER SUPPORT
Our friendly product support team is here to help!
DO NOT RETURN ITEM
We’re Here for You!
Missing a Part?
Our customer-minded support team is here for YOU,
Monday-Friday 7am-7pm CST.
We oer immediate assistance with rapid response times
from customer service agents and product techncians to
help you every step of the way!
Monday-Friday
Chat Us:
www.vivo-us.com
Give us a Call:
309-278-5303
Email Us:
If any parts are received damaged / defective OR you are
missing a part, please reach out to us within 30 days of
product delivery to have it replaced at no cost.
We are happy to replace parts to ensure you have a fully
functioning product
7AM - 7PM
If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a qualified
technician. Check carefully to make sure there are no missing
or defective parts. Improper installation may cause damage or
serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We
cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
PRE-ASSEMBLY | BEFORE YOU BEGIN
Product Warranty
Returns | Product Didn’t Work Out?
For the most up to date details on your product’s warranty, please visit
the product’s listing on our website or reach out to customer support.
vivo-us.com/products/desk-v100eb
We oer a hassle-free 30 day return on all products. Contact customer
ordered in error or no longer needed, the return shipping charges will
be at the buyer’s expense.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
WEIGHT CAPACITY
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.
176lbs
(80kg)
!
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
ELECTRICAL WARNING :
4
PACKAGE CONTENTS
A(x1)
Leg
B (x1)
Motorized
Leg
E (x1)
Sync Rod
I (x2)
Hook
J (x5)
Cable Clips
S-A (x4)
M8x50mm
Screws
S-B (x8)
M6x35mm
Screws
S-C (x4)
M8x12mm
Screws
S-D (x12)
ST4.2x15mm
Screws
T-A (x1)
5mm Allen
Wrench
T-B (x1)
Wrench
F (x1)
Cross Bar
G (x1)
Controller
H (x1)
AC Adapter
C (x2)
Foot
D (x2)
Side
Brackets
Please consult the parts list below and ensure you have everything you need to assemble
your product. If parts are missing or damaged, please contact us.
Phillips Screwdriver
|
TOOLS NEEDED:
DIFFICULTY LEVEL
Drill Level
5
A
Leg B
Motorized Leg
F
Crossbar
S-A
M8x50mm
Screws
T-A
5mm Allen
Wrench
STEP 1: Install Crossbar
ASSEMBLY STEPS
Loosen screws on Crossbar (F) using 5mm Allen Wrench (T-A), extend, and then re-tighten
screws. Mount Crossbar (F) to Leg (A) and Motorized Leg (B) using M8x50mm Screws (S-A) and
5mm Allen Wrench (T-A).
S-A
F
B
A
T-A
T-A
6
STEP 2: Install Feet
Turn desk frame over and place Feet (C) on Leg (A) and Motorized Leg (B). Secure using
M6x35mm Screws (S-B) and 5mm Allen Wrench (T-A).
C
Foot
S-B
M6x35mm Screws
T-A
5mm Allen Wrench
T-A
C
S-B
7
STEP 3: Attach Side Brackets
Return desk frame upright and attach Side Brackets (E) to Leg (B) and Motorized Leg (C) using
M8x12mm Screws (S-B) and 5mm Allen Wrench (T-A).
D
S-C
T-A
D
Side Brackets
S-C
M8x12mm Screws
T-A
5mm Allen Wrench
8
STEP 4: Adjust Desk Frame Width & Secure Frame to Desktop
F
T-A
Place frame assembly upside down on the desktop. Loosen the screws on Crossbar (F) using 5mm Allen
Wrench (T-A). Extend frame to fit the desktop, and then re-tighten screws.
T-A
5mm Allen Wrench
Secure frame assembly to the desktop with ST4.2x15mm Screws (S-D) and a Phillips screwdriver.
S-D
S-D
ST4.2x15mm Screws
9
STEP 5: Install Sync Rod
Loosen the knobs on Sync Rod (E). Insert the hex sha into Leg (A) until it reaches the notch.
While holding the hex sha, extend Sync Rod (E) onto the hex sha of Motorized Leg (B) until it
reaches the retainer.
Re-tighten the knobs.
NOTE: Hand tightening is recommended for the knobs on Sync Rod (E), but Wrench (T-B) has
been provided if needed.
1
2
3
1
3
2-2
2-1
E
B
A
T-B
E
Sync Rod
T-B
Wrench
10
STEP 6: Mount & Connect Controller
Mount Controller (G) to the desktop using ST4.2x15mm Screws (S-D) and a Phillips screwdriver.
Connect cord from Motorized Leg (B) to Controller (G), then connect Controller (G) cord to
AC Adapter (H) as shown.
S-D
G
H
G
B
G
B
S-D
ST4.2x15mm Screws
H
AC Adapter
G
Controller
Other manuals for DESK-V100EB
4
Table of contents
Other Vivo Rack & Stand manuals
Vivo
Vivo STAND-V002 User manual
Vivo
Vivo STAND-V001K User manual
Vivo
Vivo DESK-V000KL User manual
Vivo
Vivo STAND-V000B User manual
Vivo
Vivo STAND-V102G2 User manual
Vivo
Vivo STAND-LAP4 User manual
Vivo
Vivo MOUNT-PC05C User manual
Vivo
Vivo PT-SD-BS02F User manual
Vivo
Vivo MOUNT-POLE05L User manual
Vivo
Vivo MOUNT-E-MM070 User manual
Vivo
Vivo STAND-V001C User manual
Vivo
Vivo STAND-V001HG User manual
Vivo
Vivo STAND-TV65A User manual
Vivo
Vivo STAND-V001L User manual
Vivo
Vivo MOUNT KB05D User manual
Vivo
Vivo DESK-V000VLE User manual
Vivo
Vivo MOUNT-VW01 User manual
Vivo
Vivo STAND-TV07-S User manual
Vivo
Vivo MOUNT-VTK1 User manual
Vivo
Vivo STAND-V100E User manual
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
