Vitek VT-PTZ220N User manual

FEATURES:

• 1/2.8” 2.0 MegaPixel Sony® Exmor™ Progressive Scan CMOS Sensor

• Up to 30fps live view @ 1920 x 1080p

• High speed PTZ operation from 0.1°/sec to 420°/sec.

• XDNR Noise Reduction (Utilizes both 2DNR & 3DNR)

• 16:9 Video format

• True Day/Night with ICR & DSS

• H.264/MJPEG Dual Streaming

• Full duplex 2 way audio, Alarm IN/OUT

• Minimal Latency w/Max 16 User Connections

• Onvif Compliance

• MicroSD Card Slot supporting up to 64GB cards for Onboard EDGE

Recording & Playback

• 12VDC & PoE Plus (Power over Ethernet)

• 3 Year Warranty

VT-PTZ220N

ENVI Series 2.0 MegaPixel 20x

Network PTZ Camera with PoE

QUICK START GUIDE

VITEK

1. Box Contents

1) VT-PTZ220N 20x IP PTZ Camera

2) Mounting Hardware & Accessories

4) ENVI Series CD

2. Included Accessories

Surface Mount Housing

Qty: 1

Mounting screws

Qty: 3

Alarm/Multi Cable

Qty: 1

ENVI Series CD

Qty: 1

3. Available Accessories

3.1. Optional Mounts & Housings

VT-PTWMT

PTZ Wall Mount

VT-PTIBMT

PTZ I-Beam Mount

VT-PTHSG/DIP

PTZ Housing w/Clear or

Smoked Bubble

VT-PTFMK

PTZ Flush Mount Kit

w/Clear or Smoked

Bubble

VT-PTPPMT

PTZ Parapet Mount

VT-PTPDMT

PTZ Pedestal / Ceiling

Mount

VT-PTCNMT

PTZ Corner Mount

Adapter

VT-PTPLMT

PTZ Pole Mount Adapter

2 3

4. VT-PTZ220N Installation

• Remove by unscrewing the surface mount housing (See Fig. A). Simultaneously push the right and

left hooks from the camera, this will free the camera from the base. (See Fig. B)

4.1. Surface mount Installation

• Attach the PTZ Dome camera base to a sturdy surface with two of the included St4x30 screws.

4.2. Connections

1. Power

Depending on the type of installations, apply power to the camera by one of the two options below.

a) Via Ethernet – Use only with POE + switch (100 Meters max distance)

b) 12VDC - Use with 12VDC 2A ** SEE IMPORTANT NOTES BELOW **

Primary and secondary grounds are completely isolated to avoid possible ground-loop problems.

2. Ethernet Connection

Insert one end of the Ethernet cable into the network jack of your camera, and insert the other end

into the data port (switch, router, etc)

4.3. Removable Storage

For recording directly on the camera you will need to install a MicroSD card, this will allow you to

play video directly from the camera. (Please use only class 10 SD cards).

a) Insert the MicroSD memory card as shown below (the MicroSD card will need to be formatted .

(refer to Section Error! Reference source not found. Error! Reference source not found. on

page Error! Bookmark not defined. for instructions on Formatting)

4.4. Attaching PTZ Camera to Base

a) Place the camera on to the Guide and push upwards, you will hear a click from the camera

snapping in to the base.

4 5

b) Screw back the Surface Mount Housing in to Place.

5. Camera Software Installation

1. Run IP Installer Software from the CD program on a computer that is on the same network as the

IP camera.

2. Start IP Installer, by double clicking the icon “IP Installer”

3. After the program has started, the main window of IP Installer program will appear on the screen

as shown below.

4. Search for the installed camera on the network by clicking the search product icon, the camera

should appear as the image below. The default IP address is 10.20.30.40

5. To assign an automatic IP address to this camera within the network, click the “Automatic IP Setup”

icon

6. Verify the Automatic IP address provided, enter the default password root and then click Set as

shown below.

7. After the camera was configured by the program automatically, you will be able to get access by

a) Right click over the camera information, “

Go Product Homepage

”

6 7

b) Click over the icon “

Connect Product Homepage

”

8. From the Home Page, you can “

Live View”

or administrate

“Admin”

the camera.

On Live View you will be able to see live video from your camera.

28492 Constellation Road ValenCia, Ca 91355

WWW.ViteKCCtV.CoM

Version 1.0

November 2015

Other manuals for VT-PTZ220N

Table of contents

Other Vitek Security Camera manuals

Vitek

Vitek VTC-T4T3HR2MD User manual

Vitek

Vitek VTC-IRLED30 User manual

Vitek

Vitek VTC-TNT5RFS User manual

Vitek

Vitek VT-PIRC1 User manual

Vitek

Vitek VTD-A4F User manual

Vitek

Vitek VTD-C410 User manual

Vitek

Vitek Transcendent Series User manual

Vitek

Vitek VTC-IRX36/3895 User manual

Vitek

Vitek VTC-BHOCCR212M User manual

Vitek

Vitek VTC-TNB5RFEA-2 User manual

Vitek

Vitek VTD-HOCR2812 User manual

Vitek

Vitek VTD-C410 User manual

Vitek

Vitek VTD-IR2811DN User manual

Vitek

Vitek Transcendent VTC-TNB8RFS-2 User manual

Vitek

Vitek Transcendent VTC-TNT3RFE User manual

Vitek

Vitek VTD-C510 User manual

Vitek

Vitek VTD-MVH2910/L35 User manual

Vitek

Vitek Transcendent Series User manual

Vitek

Vitek VTC-THB5R3 User manual

Vitek

Vitek Transcendent Series User manual

Vitek

Vitek VTC-IRH70 User manual

Vitek

Vitek TRANSCENDENT VTC-TNB4LPRN User manual

Vitek

Vitek VTC-TNB4RFS User manual

Vitek

Vitek VT-PTZ12W User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Lumens

Lumens VC-A50PNW installation guide