Viega Advantix base unit User manual
for bonded sealing (tiled shower) with sealing mat
Model Year built:
4938 from 01/2006
en_INT
Advantix bath drain
Instructions for Use
Advantix bath drain 2 from 21
Table of contents
1About these instructions for use 4
1.1 Target groups 4
1.2 Labelling of notes 4
1.3 About this translated version 5
2Product information 6
2.1 Standards and regulations 6
2.2 Intended use 6
2.2.1 Areas of use 6
2.2.2 Media 7
2.2.3 Drainage capacity 7
2.3 Product description 8
2.3.1 Overview 8
2.3.2 Technical data 8
2.4 Information for use 8
2.4.1 Installation variations 8
2.4.2 Sealing 10
2.4.3 Fire protection 12
2.5 Required accessories 12
3Handling 14
3.1 Assembly information 14
3.1.1 Important note 14
3.1.2 Installation dimensions 15
3.1.3 Tools and materials 15
3.2 Assembly 15
3.2.1 Connecting the drain 15
3.2.2 Preparing for subsequent work 17
3.2.3 Sealing the drain 18
3.2.4 Mounting the top 19
3.3 Care 20
3.3.1 Care tips 20
3.3.2 Cleaning the drain 20
3.4 Disposal 21
Table of contents
Advantix bath drain 3 from 21
1 About these instructions for use
Trade mark rights exist for this document; for further information, go to
viega.com/legal.
1.1 Target groups
The information in this instruction manual is directed at the following
groups of people:
nHeating and sanitary professionals and trained personnel
nTilers
nConsumers
Individuals without the abovementioned training or qualification are not
permitted to mount, install and, if required, maintain this product. This
restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
1.2 Labelling of notes
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns of possible life-threatening injury.
WARNING!
This symbol warns of possible serious injury.
CAUTION!
This symbol warns of possible injury.
NOTICE!
This symbol warns of possible damage to property.
This symbol gives additional information and hints.
About these instructions for use
Advantix bath drain 4 from 21
1.3 About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e. g. EN) and/or in Germany
(e. g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The relevant national laws, stand‐
ards, regulations, directives and other technical provisions take priority
over the German/European directives specified in this manual: The
information herein is not binding for other countries and regions; as said
above, they should be understood as a recommendation.
About these instructions for use
Advantix bath drain 5 from 21
2 Product information
2.1 Standards and regulations
The following standards and regulations apply to Germany / Europe and
are provided as a support feature.
Regulations from section: Sealing
Scope / Notice Regulations applicable in Ger‐
many
Stress class of the underground,
as well as suitable bonded sealing
ZDB-Merkblatt 8/2012
Stress class of the underground,
as well as suitable bonded sealing
Leitfaden zur Abdichtung im Ver‐
bund (AIV)
Approved bonded sealings with
proof of practicability in keeping
with building law for stress
classes A and AO
ETAG 022 T1
Approved bonded sealings with
proof of practicability in keeping
with building law for stress
classes A, B and C
DIBt-Bauregelliste A, Teil 2 des
DIBt und Prüfgrundsätze für
Abdichtungen im Verbund
(PG AIV-F)
Permitted bonded sealings EN 14891
Regulations from section: Fields of application
Scope / Notice Regulations applicable in Ger‐
many
Specifications not met due to
water seal level and small
drainage capacity.
EN 1253-1
Regulations from section: Media
Scope / Notice Regulations applicable in Ger‐
many
Typical domestic wastewater DIN 1986-3
2.2 Intended use
2.2.1 Areas of use
The drain is designed for small to medium volumes of water, which
occur in e.g. residential building.
Product information
Advantix bath drain 6 from 21
Technical information, see
Ä
Chapter 2.3.2 „Technical data“ on page 8.
The drain with a horizontal drain socket is suitable for both mounting in
a floor opening as well as for mounting on the floor.
The side inlet not serves as an odour trap.
The water seal level of 30 mm and the small drainage
capacity do not meet the specifications pursuant to the
standards and regulations. See
Ä
„Regulations from sec‐
tion: Fields of application“ on page 6.
Check if the drainage capacity is sufficient before mounting!
2.2.2 Media
The drain is intended for draining of household-type wastewater in con‐
stant operation, see
Ä
„Regulations from section: Media“ on page 6.
nThe short-term temperature of the wastewater may reach up to
95° C. The temperature must be considerably lower in constant
operation.
nThe pH value must be higher than 4 but lower than 10.
It is not permitted to introduce wastewater which would damage the
product material.
2.2.3 Drainage capacity
Drainage capacity at an accumulation height of 10 mm above the grate:
0.45 l/s
Drainage capacity at an accumulation height of 20 mm above the grate:
0.5 l/s
Drainage capacity through the lateral inlet: 1.2 l/s
The values are dependent on the total height of the drain unit.
10
20
Product information
Advantix bath drain 7 from 21
2.3 Product description
2.3.1 Overview
1
3
2
5 4
1 removable odour trap
2 flange for the application of the bonded sealing
3 horizontal drain socket (DN 50) with ball joint
4 Base unit
5 side inlet
2.3.2 Technical data
Nominal width [DN] (drain
socket)
50
Nominal width [DN] (inlet) 40
Drainage capacity
Ä
Chapter 2.2.3 „Drainage capacity“
on page 7
Dimensions and installa‐
tion height
Ä
Chapter 3.1.2 „Installation dimen‐
sions“ on page 15
Water seal level 30 mm
Load class corresponds with the load class of the top
used
2.4 Information for use
2.4.1 Installation variations
The mounting of the drain in a bare concrete floor is as follows:
Installing in a bare concrete floor
Product information
Advantix bath drain 8 from 21
nThe drain is placed in a floor recess and then cast-in.
During the mounting on the floor, the drain is integrated into the floor
construction. At the same time, it can e.g. be integrated into the level‐
ling screed or heat insulation. If necessary, a vertical drainpipe can be
led through a drill hole in the floor at the same time.
NOTICE!
The creation of a floor recess must be agreed with the fol‐
lowing people:
– a structural engineer
– the on-site fire protection inspector or the specialist
engineer for fire protection
If necessary, proof of compliance with building code or an
expert's report must exist.
Fig. 1: General installation example – Floor
recess
Mounting on a floor
Fig. 2: General mounting example – Mounting
on the floor
Product information
Advantix bath drain 9 from 21
2.4.2 Sealing
To protect against moisture penetration, apply sealing foils, which are to
be processed in liquid state, directly below the tiles on screed and
walls. The determination of the stress class and the underground as well
as the selection of the suitable bonded sealing must be carried out in
compliance with the valid standards and regulations, see:
Ä
„Regula‐
tions from section: Sealing“ on page 6.
The bonded seal can be applied directly onto the drain flange.
Fig. 3: Diagram of a bonded seal
Bonded sealing
Product information
Advantix bath drain 10 from 21
Other manuals for Advantix base unit
1
Table of contents
Other Viega Plumbing Product manuals
Viega
Viega Multiplex Trio F Series User manual
Viega
Viega Eco Plus User manual
Viega
Viega 6161.52 User manual
Viega
Viega Eco Plus User manual
Viega
Viega Eco Plus User manual
Viega
Viega 4989 User manual
Viega
Viega Multiplex 6171.10 User manual
Viega
Viega 6161.50 User manual
Viega
Viega Prevista Dry Plus 8570.35 User manual
Viega
Viega 8315.1 User manual
Viega
Viega 4980.60 User manual
Viega
Viega Eco Plus 1F User manual
Viega
Viega Multiplex Trio F User manual
Viega
Viega 4956.4 User manual
Viega
Viega Prevista Dry Plus 8545.32 User manual
Viega
Viega 6960 User manual
Viega
Viega 8653.1 User manual
Viega
Viega Tempoplex 6962 User manual
Viega
Viega Prevista Dry Plus 8545.31 User manual
Viega
Viega TEMPOPLEX 80 User manual
Popular Plumbing Product manuals by other brands
Weka
Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS
Kohler
Kohler K-6228 Installation and care guide
UBERHAUS DESIGN
UBERHAUS DESIGN 75175017 Operator's manual
American Standard
American Standard DetectLink 6072121 manual
Uponor
Uponor Contec TS Mounting instructions
Pfister
Pfister Selia 49-SL Quick installation guide
Sanela
Sanela Lema SLP 59RB Instructions for use
Elkay
Elkay EDF15AC Installation, care & use manual
Hans Grohe
Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions
baliv
baliv WT-140 manual
Kohler
Kohler Mira Eco Installation & user guide
BELLOSTA
BELLOSTA romina 0308/CC Installation instruction