Viega 8317 User manual

Model Year built:

8317 from 02/2000

en_INT

Viega Mono bidet block

Instructions for Use

Viega Mono bidet block 2 from 12

Table of contents

1About these instructions for use 4

1.1 Target groups 4

1.2 Labelling of notes 4

1.3 About this translated version 5

2Product information 6

2.1 Intended use 6

2.1.1 Areas of use 6

2.2 Product description 6

2.2.1 Overview 6

2.2.2 Compatible components 7

2.2.3 Sound protection 7

2.3 Required accessories 7

3Handling 8

3.1 Assembly information 8

3.1.1 Mounting conditions 8

3.1.2 Installation dimensions 8

3.1.3 Required tools and materials 9

3.2 Assembly 10

3.2.1 Mounting the Viega Mono 10

3.3 Disposal 12

Table of contents

Viega Mono bidet block 3 from 12

1 About these instructions for use

Trade mark rights exist for this document; for further information, go to

viega.com/legal

1.1 Target groups

The information in this instruction manual is directed at the following

groups of people:

nHeating and sanitary professionals and trained personnel

It is not permitted for individuals without the abovementioned training or

qualification to mount, install and, if required, maintain this product. This

restriction does not extend to possible operating instructions.

The installation of Viega products must take place in accordance with

the general rules of engineering and the Viega instructions for use.

1.2 Labelling of notes

Warning and advisory texts are set aside from the remainder of the text

and are labelled with the relevant pictographs.

DANGER!

This symbol warns against possible life-threatening injury.

WARNING!

This symbol warns against possible serious injury.

CAUTION!

This symbol warns against possible injury.

NOTICE!

This symbol warns against possible damage to property.

Notes give you additional helpful tips.

About these instructions for use

Viega Mono bidet block 4 from 12

1.3 About this translated version

This instruction for use contains important information about the choice

of product or system, assembly and commissioning as well as intended

use and, if required, maintenance measures. The information about the

products, their properties and application technology are based on the

current standards in Europe (e. g. EN) and/or in Germany

(e. g. DIN/DVGW).

Some passages in the text may refer to technical codes in Europe/

Germany. These should serve as recommendations in the absence of

corresponding national regulations. The relevant national laws, stand-

ards, regulations, directives and other technical provisions take priority

over the German/European directives specified in this manual: The

information herein is not binding for other countries and regions; as said

above, they should be understood as a recommendation.

About these instructions for use

Viega Mono bidet block 5 from 12

2 Product information

2.1 Intended use

2.1.1 Areas of use

The Viega Mono bidet block is suitable for mounting of wall-mounted

bidets and for walling in or around. The model 8317 is equipped with

height-adjustable mounting brackets for cold and hot water connection

and a wastewater connection.

2.2 Product description

2.2.1 Overview

678910

Fig. 1: Components

1 Viega Mono bidet pre-wall block

2 Fixing rail for wall plates with two rubber panels for the sound-pro-

tective fixing of the wall plates

3 Drain elbow DN 40/DN 50, seal for drain elbow

4 Protective collar

5 Mounting rail

6 Fixing material: threaded rods

7 Fixing material: hexagonal nuts

8 Fixing material: dowels and screws

9 Fixing material: threaded rods

Product information

Viega Mono bidet block 6 from 12

10 Mounting angles for wall mounting

11 Protective plug

12 mounting set

2.2.2 Compatible components

The Viega Mono bidet block is compatible with common WC ceramic

types. Fixing material for the bidet block and the ceramic is comprised

in the scope of delivery.

The following compatible components can be used for extensions:

nViega Mono mounting set, model 8310.5

nViega Mono standing bracket, model 8310.45

2.2.3 Sound protection

The compact casing of the Viega Mono product series consist of

expanded polystyrene (EPS). This material offers effective sound pro-

tection and serves as render base.

The rubber panels on the fixing rail for wall plates allow a sound-protec-

tive fixing.

2.3 Required accessories

You require wall plates for the cold and hot water inlet to be able to

connect the bidet block onto the potable water installation.

Sound and site protection through EPS

Sound-protective fixing

Wall plates

Product information

Viega Mono bidet block 7 from 12

3 Handling

3.1 Assembly information

3.1.1 Mounting conditions

With the construction height, the marked height of the upper edge of

the finished floor (UEFFL) must be observed.

The Viega Mono bidet block may only be mounted on even wall sur-

faces (masonry or concrete).

3.1.2 Installation dimensions

180

80-350

OKFFB

230

340

400

490

130-190

60-270

145-265

Fig. 2: Dimensional drawing

Construction height

Suitable walls

Handling

Viega Mono bidet block 8 from 12

3.1.3 Required tools and materials

The following tools are required for mounting:

nDrill with 10 mm drill bit

nFork or ring spanner, size 13 and size 17

nRatchet with sockets, 13 and 17 mm

nscrewdriver

nSpirit level

Required tools

Handling

Viega Mono bidet block 9 from 12

3.2 Assembly

3.2.1 Mounting the Viega Mono

INFO! Fixing height of the bidet ceramic The fixing height of the

bidet ceramic is the drill hole height for rail mounting.

Determine drill hole (height X from UEFFL) height for the mounting

rail.

Position the mounting rail with a spirit level and draw in drill holes.

Observe drill hole interval:

nThe minimum interval is 380 mm.

nThe maximum interval is 480 mm.

Drill holes and screw on mounting rail.

Tighten the threaded bolts from the bidet block at intervals of

340 mm from each other, measured from the middle of each

threaded bolt.

Position the bidet block and attach using the threaded nuts sup-

plied.

Screw threaded bolts for bidet ceramic into the block.

Mounting the rails

Handling

Viega Mono bidet block 10 from 12

Table of contents

Other Viega Plumbing Product manuals

Popular Plumbing Product manuals by other brands

Weka

Weka 506.2020.00E ASSEMBLY, USER AND MAINTENANCE INSTRUCTIONS

Kohler

Kohler K-6228 Installation and care guide

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Operator's manual

American Standard

American Standard DetectLink 6072121 manual

Uponor

Uponor Contec TS Mounting instructions

Pfister

Pfister Selia 49-SL Quick installation guide

Fortis

Fortis VITRINA 6068700 quick start guide

Fortis

Fortis MILANO 78211JS installation instructions

Kohler

Kohler K-12183 Homeowner's guide

Maxxus

Maxxus MX-M206-01 instruction manual

Moen

Moen 5922 Series installation instructions

Kohler

Kohler Centerset K-15240 Homeowner's guide

Sanela

Sanela Lema SLP 59RB Instructions for use

Elkay

Elkay EDF15AC Installation, care & use manual

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Instructions for use/assembly instructions

baliv

baliv WT-140 manual

Kohler

Kohler Mira Eco Installation & user guide

BELLOSTA

BELLOSTA romina 0308/CC Installation instruction