Vicon Cruiser SN663V User manual

www.vicon-security.com

XX249-40-00

Cruiser™ SN663V Outdoor PTZ

Network Camera Dome

Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the

operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed

to be used in life-critical situations and must not be used for this purpose.

Vicon Industries Inc.

Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116

24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300

Document Number: 8009-8249-40-00

Product specications subject to change without notice.

Issued: 1113

Quick Guide

1. Description

The SN663V network camera is an outdoor PTZ camera dome that includes a 1080p high

resolution camera lens combination that provides video transmission over a network. It is fully

featured for security surveillance and remote monitoring needs.

The network camera supports H.264 compression technology as well as M-JPEG compression. By

using its dedicated program, multiple users are able to have access to the network camera

simultaneously or a single user can monitor various network cameras at the same time. It also

enables users to play, store and retrieve a monitoring image by using a PC. All the settings and

real-time monitoring screens are provided through access to the web.

1.1 Components

The camera is designed to be a compact small size with a hard dome camera housing constructed

of aluminum, steel and plastic. The housing is designed to be mounted on a wall or a ceiling. The

housing meets the Protection Classification IP66 standards for dust and moisture resistance.

* Dome Camera 1

* Installation Guide/CD 1

* Template Sheet 1

* Mounting Bracket 1

* Safety Lanyard 1

* Accessory Kit 1

1) Mounting screws (PH6 x 35.0) (4)

2) Plastic anchors (4)

3) O-Rings (4)

4) Torx wrench (1)

* Accessory Connector 1

1) 3-pin terminal block (1)

2) 6-pin terminal block (1)

1.2 Key Features

•Brilliant Video Quality

The network camera offers the highly efficient H.264 video compression, which drastically

reduces bandwidth and storage requirements without compromising image quality. Motion

JPEG is also supported for increased flexibility.

•Triple Streams

The network camera can deliver triple video streams simultaneously at full frame rate in all

resolutions up to 1920 x 1080 using Motion JPEG (M-JPEG) and H.264. This means that

several video streams can be configured with different compression formats, resolutions and

frame rates for different needs.

•Image Setting Adjustment

The network camera enables users to adjust image settings such as contrast, brightness and

saturation to improve images before encoding takes place.

•Intelligent Video Capabilities

The network camera includes intelligent capabilities such as enhanced video motion detection.

The network camera’s external inputs and outputs can be connected to devices such as

sensors and relays, enabling the system to react to alarms and activate lights or open/close

doors.

•Improved Security

The network camera logs all user access and lists currently connected users. Also, its full

frame rate video can be provided over HTTPS.

•PoE (Power over Ethernet)

This network camera can be powered through PoE, which simplifies installation, since only

one cable is needed for carrying power as well as video controls.

•ONVIF Certificate

ONVIF is a global interface standard that makes it easier for end users, integrators,

consultants, and manufacturers to take advantage of the possibilities offered by network video

technology. ONVIF enables interoperability between different vendors’ products, providing

increased flexibility, reduced cost, and future-proof systems.

2. Installation

2.1 Installation Details

The dome camera is for use in surface or pendant mounting applications; the mounting location

and material must be capable of supporting loads of up to 4.4 lb (2.0 kg). (Pendent mounting must

use pendent mount accessory.)

The dome camera’s mounting bracket should be attached to a structural object, such as hard wood,

wall stud or ceiling rafter that supports the weight of the dome camera.

CAUTION: A silicone rubber sealant (customer provided) must be applied to seal the

housing to secure waterproofing.

2.1.1 Locking Dome Camera

A. Make screw holes on the ceiling using the supplied mounting Template Sheet (Figure A).

B. Secure the provided Mounting Bracket to the ceiling using supplied Anchors (4x) and

Mounting Screws (4x) (Figure B).

C. Attach the Safety Lanyard to the Safety Lanyard Hook of the Mounting Bracket (Figure C).

D. Align the locking tab on the bracket and the locking slot on the base of the dome (Figure D).

E. Turn the dome counterclockwise approximately 10 degree to the locked position (Figure E).

CAUTION: Before installing the mounting bracket to surface, pre-adjust the four mounting

screws "A" on the base of the dome camera to best match the mounting

bracket locked position. Unscrew the locking screw on the side of the dome's

base and fit the tab of the mounting bracket into the locking slot. Screws "A"

should not be too tight or too loose when the dome is in the locked position.

After setting the proper positions of screws "A," remove the mounting bracket

and install it to the mounting surface. If it is too difficult to lock the dome in

position after the mounting bracket has been installed readjust the screws "A"

by unscrewing them a small amount and try to install dome camera again.

2.2 Basic Configuration of Camera System

No. Connector Wire Color Description

1 3-pin terminal block RED 24 VAC or 12 VDC+

WHITE 24 VAC or 12 VDC-

2 6-pin terminal block

PINK GND

GRAY ALARM INPUT

BROWN GND

YELLOW ALARM OUTPUT

GREEN RS485+

BLUE RS485-

3 RJ-45 BLACK Ethernet, RJ-45 port compatible with

10/100Mbps having PoE functionality.

4 STEREO GRAY AUDIO OUTPUT

5 STEREO BLACK AUDIO INPUT

The camera must be installed by qualified service personnel in accordance with all local and

federal electrical and building codes.

2.3 Connections

•Connecting the Network

Connect a standard RJ-45 cable to the network port of the camera. Generally a cross-over

cable is used for direct connection to a PC, while a direct cable is used for connection to a hub.

•Connecting Alarms

- AI (Alarm Input)

You can use external devices to signal the camera to react upon events. Mechanical or

electrical switches can be wired to the AI (Alarm Input) and G (Ground) connectors.

- G (Ground)

NOTE: All the connectors marked G or GND are common.

Connect the ground side of the alarm input and/or alarm output to the G (Ground) connector.

- AO (Alarm Output)

The camera can activate external devices such as buzzers or lights. Connect the device to

the AO (Alarm Output) and G (Ground) connectors.

•Connecting to the RS485

The camera can be controlled remotely by an external device or control system, such as a

control keyboard, using RS485 half-duplex serial communications signals.

•Connecting the Power

Connect power of 12 VDC or 24 VAC 1.5 A for the camera.

When using a 12 VDC adapter, connect the positive (+) pole to the ‘+’ position and

the negative (-) pole to the ‘-’ position.

Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source only.

- Be careful not to reverse the polarity when connecting the power cable.

- A router featuring PoE (Power over Ethernet) can be used to supply power to the camera.

- If PoE and 12 VDC are both applied, this camera will be supplied with power from PoE.

- 24 VAC is recommended to use for the camera power for stable operation with heater kit.

If using PoE, the heater will not operate at all.

2.4 Network Connection & IP assignment

The network camera is designed for use on an Ethernet network and requires an IP address for

access. Most networks today have a DHCP server that automatically assigns IP addresses to

connected devices. By the factory default, your camera is set to obtain the IP address

automatically via DHCP server. If your network does not have a DHCP server the network camera

will use 192.168.1.100 as the default IP address.

If DHCP is enabled and the product cannot be accessed, run the “SmartManager” utility on the CD

to search and allocate an IP address, or reset the product to the factory default settings and then

perform the installation again.

1) Connect the network camera/device to the network and power up.

2) Start SmartManager utility (Start > All programs > SmartManager > SmartManager). The main

window will display, and after a short while any network devices connected to the network will

be displayed in the list.

3) Select the camera on the list and click right button of the mouse. The pop-up menu displays

as below.

4) Select Assign IP Address. The Assign IP window will display. Enter the required IP address.

NOTE: For more information, refer to the SmartManager User’s Manual.

3. Operation

The network camera can be used with Windows® operating system and browsers. The

recommended browsers are Internet Explorer®, Safari®, Firefox®, Opera™ and Google®

Chrome® with Windows.

NOTE: To view streaming video in Microsoft Internet Explorer, set your browser to allow ActiveX

controls.

3.1 Access from a browser

1) Start a browser (ex., Internet Explorer).

2) Enter the IP address or host name of the network camera in the Location/Address field of your

browser.

3) A starting page displays. Click Live View or Setup to enter web page.

4) The network camera’s Live View page appears in your browser.

Other manuals for Cruiser SN663V

Table of contents

Other Vicon Security Camera manuals

Vicon

Vicon SURVEYOR 2000 S2000-CC22-EX User manual

Vicon

Vicon V992-N User manual

Vicon

Vicon V9360W User manual

Vicon

Vicon Roughneck V920D Series User manual

Vicon

Vicon VC-600W User manual

Vicon

Vicon V662V-Series Operating instructions

Vicon

Vicon Roughneck V920D Series Manual

Vicon

Vicon CE102B User manual

Vicon

Vicon Series 234-00-02 Operating instructions

Vicon

Vicon XX152-10-01 Installation instructions

Vicon

Vicon SN680D-WNIR User manual

Vicon

Vicon V920B Series User manual

Vicon

Vicon V700-C Series User manual

Vicon

Vicon V9317H Series User manual

Vicon

Vicon V15CCM-IR-2 Series Rouchneck User manual

Vicon

Vicon S10-CH Mini User manual

Vicon

Vicon V672V-1 Operating instructions

Vicon

Vicon V905-CUBE User manual

Vicon

Vicon Cruiser SN663V-B-EX Operating instructions

Vicon

Vicon IX4000AL User manual

Vicon

Vicon I-ONYX VND-970IP User manual

Vicon

Vicon V1020-WIR-180 User manual

Vicon

Vicon SVFT-W35 User manual

Vicon

Vicon V3FCD SERIES User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications

Lumens

Lumens VC-A50PNW installation guide